Hey all. I recent installed Ryzen Master to play around with it and noticed that the CO tab is not available and it indicates that CO is not enabled for me. However, in bios (v4805 on Asus CH8 DH) I have it enabled with -20 all core offset. Is this just a bug, or something else? Any other...
I've tried google and searching here but can't really understand the breakout in the image below for my Asus Crosshair Dark Hero VIII. Currently I have a 3090 installed and one WD SN850X in the M.2_1 slot. I have two WD Blue 2.6" SSDs attached to SATA ports. I have W11 on the NVME of course and...
Hey all, I am selling an aquacomputer high flow next. Please note that this flow meter exhibits a ticking sound about 50% power and above on my D5 pump. Aquacomputer sent me a new one and didn't have a problem with me selling this one as long as I'm up front with the buyer. Additionally it will...
So I purchased some 180 degree adapters to clean up the 8 pin cables on my 3090 and I checked continuity. All the grounds are connected together and all the 12 V are connected together. I don't have an issues with the grounds all being connected, but seems odd that the 12Vs are all connected. Is...
Hello again,
I just finished installing water cooling kit on my PC and was wondering if these temps look acceptable and if there is anything I can do to improve them if not. Delta T maxed at 12.8C, water temp maxed at 36.1C. This is an hour or so of gaming.
Hello fine people. I was wondering if there are any AquaSuite experts that might be able to lend me some advice. I've searched the interwebs and I cannot find a way to create an Alarm state on my Octo (that is controlling my lighting) that is based on flow from my newly installed High Flow Next...
I am putting up for sale my 5800X since I upgraded to the X3D version. Asking $170 shipped to lower 48 states F&F Paypal. This processor ran -15 all core PBO except for one core at -8, and 3800/1900 MCLK/FCLK perfectly stable, no extra SOC voltage needed to achieve FCLK. Was air cooled with...
So I recently bought a 5800X3D to replace my 5800X. I have successfully booted into Windows 11 with 2000 MCLK/FCLK, -20 PBO2 CO, but I am getting some whea errors when running Aida64 cache and benchmark which has always been my go to to see those errors quickly. Any Idea on how to fix that? Just...
I am putting up for sale my old gaming rig. List of parts below. Heatware is Light1984. I have no original boxes or manuals. I am only selling parts listed. Prices do not include shipping. Payment through PayPal.
Corsair White Special Edition 600T with customizations to make a 360 radiator fit...
So I started my computer this morning and had some very odd behavior (W10 pro 20H2). The start menu only occasionally works when clicking start, often nothing happens, windows update immediately closes when I open it, windows virus quick scan runs but closes upon completion, Firefox was crashing...
Curious if anyone has experienced something similar. When completely powered down (fastboot disabled) I get a1/2 second long buzz noise every 20 seconds or so. It's not high pitched, so I'm not thinking a coil. It happens whether I'm plugged into the wall or my UPS. Got an email in to seasonic...
So I have been able to overclock my IF to 1900 mhz and have been rock stable. I tried to increase to 2000 on the IF but regardless of voltages I try, I get WHEA errors in windows. I am currently running my gskill 4000CL17 kit at 3800CL16 1:1 with IF. Would I see any benefit in games by dropping...
So I've been trying to get the 10% fps boost from extra RGB. Upgraded my four 140mm case fans to Corsair QL140s that have 34 LEDs each for maximum unicorn vomit. I got a single splitty4 because it has four Corsair connectors and four pwm (refuse to put any software on my computer to run RGB...
So I just finished my build after getting my dark hero motherboard and this is what the gpu looks like at the back of the BeQuiet 802. Any thoughts why the ports aren't in the middle of the opening and will there be any issue with the outside of the display port connector grounding out on the...
Does anyone know if there is any difference in chipset drivers from the board manufacturer vs direct from AMD. Dark Hero is supposed to get here Thursday and drivers on Asus site are lower revision than whats on AMD site. Curious if Asus tweaks the drivers in anyway specific to the board. I have...
Not sure if I should put this here or water cooling but I'm curious if any of you seasoned veterans have an elegant solution to Mounting this Aquacomputer Ultitube. I would like to mount it where it is in the first picture, but the BeQuiet 802 just has plastic panels where I have it. I'm sure it...
Curious if anyone has used a GPU support that keeps the right side from sagging. I've seen some before but was curious if anyone has an experience with a particular brand that you like. I have a 3090 ftw3 ultra that will eventually be on water. So it will be heeaaavvvyy.. TIA
Looking to sell six pure wings 2 140mm fans from be quiet. Never used. Installed once for test fit. Looking for $50 plus shipping for all six. Paypal F&F only. Heatware is Light1984
Hey all, curious if anyone has any experience with the WD blue ssd. Looking at getting a 2tb 2.5" to store my games and what not for a new build. They have decent reviews on Newegg and are priced ok $220. Is there something better for cheaper in the same size or should I pull the trigger? TIA
As title says, I'm curious about the two routes to control fans and pumps. What does everyone prefer? I've been out of the game for a long time, my current case has a fan control knob on top which should date it quite well. My pump has a speed control dial in the back that I haven't adjusted...
I searched but didn't find an answer. Last time I did a fill and leak test was with my swifttech pump which uses a 12v molex connector and has a rpm adjustment on the back via a rheostat. How do you fill and bleed these new (new to me, lol) pwm pumps if you won't have a pwm signal from your...
So as many people are doing, I'm getting ready to upgrade to the latest and greatest and I'm planning out the build. My system currently runs distilled water a silver plug and UV lights with white UV reactive soft tubing. I have had zero issue with build up, scale, corrosion, etc. In the 7 years...
So like many people I'm getting ready to upgrade once the new stuff lands later this year, RTX 3090, Zen 3, etc. I have no experience with nvme drives but am thinking about a 512 gb/1 tb for my main drive with either a 2 tb nvme or 2 tb sata drive as my storage (music, game install backups...
Hey all, I need to 3D print a modified button for the release mechanism on my BeQuiet 801. I have the solidworks file done. Does anyone have any recommendations on places to have it 3D printed? I know of shapeways, but they are expensive. TIA
I really fell in love with the looks of the BeQuiet windowed 801 and I especially like how the side panels attach and detach. Only problems I have with the case are the lack of color options (need a white case for that storm trooper look) and the restricted air flow. I know they are going for...
My Seasonic X1050, bought in June 2012, just cut out on me. I jumped it and it will not start, just clicks, fan starts for a second, then immediately stops. May be an easy fix, may be completely toast. I have not opened it up. I don't really want to mess with, but it may be worth someone's time...
Just had my Seasonic X1050 crap out. Verified it was the power supply by jumping it without anything connected and it would not turn on. Beyond that, I don't have any experience with PSUs. I bought it in June 2012 so it's out of warranty. Is it worth messing with or should I just chuck it? Got a...
Hey all, was wondering if you guys have any suggestions on where to buy modding supplies. In particular, I'm looking to get a very specific style of mesh or grill material. I have a be quiet silent base 801 that I'm going to cut the top on and add in an exhaust vent (140mmx3). I found some...
So.. I've been wanting to upgrade my current GPU (970 GTX) to a 2080 Super or 2080 Ti or whatever is released this summer. But the rest of my system really doesn't "need" to be upgraded in my opinion. How many frames, or what kind of percentage in performance do you guys/girls think I stand to...
My good people, don't really post much, have been out of the game for awhile so to speak, but will be coming back soon. I have purchased a case and have most of my parts picked out (yet to purchase). I will be returning to an AMD system most likely but I am unsure what to do for a GPU. My gut...
Was curious if anyone out there has any recommendations on where I could ship a case to have it professionally painted. Can't go powdercoat cause I want plastic painted as well. I have a bequiet silent base 801 that I want in white. Looking for somewhere close to Florida if possible. I contacted...
I am selling a brand new Be Quiet Silent Base 801 window in all black. Asking $135 shipped to CONUS. No pictures but can take some upon request.
I have for sale a NEC WMGX2 20" Glossy IPS display with remote. I do not have the original sound bar that came with it. I am asking $75 plus shipping...
Looking to sell my 27" Glossy Apple Cinema Display. Been running great for a few years since I bought it new. No flaws with the monitor, dead/stuck pixels etc. Would be great for content creators or artists. I have used it mostly for gaming but want to try some of these 100+ hz displays the kids...
I have for sale an evga SuperClocked 680GTX graphics card with Heatkiller GTX680LT water block installed. This gave me several years of great service but was replaced with my GTX970. $55 plus shipping is my final offer. Someone take this off my hands
Thanks,
Josh
Anyone use this yet? I like the idea of having an all in one utility for tuning, except on the graphics tab, the only available option to tune is voltage (using v1.10.4). I find that odd considering I have an EVGA 680 GTX, if it was another brand maybe. Not sure why all the other options would...
Anyone one have suggestions on what to put in a loop just temporarily to clean/flush it. I just put together my first build and everything is ready to go, just waiting on a new PSU because my Seasonic came DOA from newegg. I was able to hook up a second computer just to run the pump, get the...
So I've built a new rig after five or six years and I decided to go water cooling. I bought a jumper so I could purge the air and leak test before firing everything up. Well, I had some issues at first and I thought it was just cabling. But I eventually got the pump running by itself with just...