I have an NUC6i7KYK (Skull Canyon)
https://www.intel.com/content/www/u...uc-kit-nuc6i7kyk-features-configurations.html
Comes with:
Crucial 525GB m.2 SSD
2x8GB crucial pc2133 C16
$460 Shipped lower 48 states
https://i.imgur.com/kJxVInm.jpg
2x Gigabyte R9 290 Reference cards.
Mined with both for 3 months undervolted at -25mv at 50% fan speed. This is less stress than gamers who overvolt and overclock. I've been using them in my gaming rig since with no problems -25mv 970c/1250m.
Includes stock boxes and packaging with whatever...
MSI GTX 680 2GB Reference Card. (7 months old). $240 Shipped to Lower 48 SOLD
MSI GTX 680 2GB Reference Card. (16 months old). $240 Shipped to Lower 48 SOLD
Gigabyte R9 290 4GB Reference Card. Elpida memory. $350 Shipped to Lower 48. REMOVED
All cards work and are as is. 290 will...
I swapped out my 680's for my 290's that were mining for the past 4 months.
I uninstalled nvidia and rebooted to safe mode and DDU removed all nvidia (except physx). I Rebooted and installed 14.4 RC drivers with both cards plugged in. Crossfire says enabled in both the driver manager and also...
I have a Pixel Perfect 27" IPS 2560x1440 Overlord computing monitor with an Anti-Glare finish.
I paid extra for perfect pixels.
I'm thinking I may want a 120hz monitor because I do more competitive FPS games.
Monitor looks and works great. Only one Input DVI-DL and it's the SE model...
I'm looking to buy a second GTX 680. I own a reference board MSI currently.
I'll entertain other models of the 680 also.
Looking to spend MAX 380 shipped. If you'r ein the ballpark send me a PM and or reply.
I've had the XFX reference 5850 1GB for ~2 years. It's flashed with the MSI bios to allow overclocking. (850mhz core on stock vcore) $125 Shipped Cont 48 states. Transferable warranty included, so says XFX support. SOLD
Sapphire non-reference 5850 1GB had for 8 months in crossfire. $125...
I've been noticing that all of these X2 cards, nvidia and ati as well as plain ole x-fire and SLI require too much driver coding that specializes per game.
Example: games will run slow unless nvidia or ati specifically have their coders look into the game and add specific profile to the game...
taken from vr-zone
http://en.expreview.com/?p=53&page=5
cheaper priced and identical performance.
seems to me the answer for anyone would be the cheaper, cooler, and low power consuming card!
ATI successfully implemented that 10mg of RAm on the core of the xbox 360 gpu.
What is holding ati back from starting to use it on PC cards? I heard it helped improve AA performance to closely give 2x and even 4x for free.
Sounds like something ati should start implementing.
Every review of the new 4x4 setup has been one in windows XP Sp2. Hence missing 1/2 of the entire memory bandwidth this system supports.
The reviews didn't cripple the other systems in the benchmark by taking off 1/2 of their bandwidth!
Vista will support NUMA, Linux and windows server...
I just took my x800xt aiw (1.6ns samsung memory) to 575/585 on the stock single slot cooler.
I didn't think the r420 core could hit 575mhz on such a small cooler?
what are other overclocks of those with my same card or even x850xt's..
double shutoff quick disconnects:
http://www.omega.com/pdf/tubing/couplings/ft-hfc-12series/ft-hfc12series.asp
I'll be going for 1/2" ID tubing going to my external watercooling enclosure. I was thinking of doing QD's at my computer case. But does anyone have experience or testing done to...
Scope: To created an external enclosure for my watercooling parts.
Design: A square base made of aluminum angles, with an aluminum plate for the floor.
Use clear acrylic for the walls and Lid (fasten lif with hinges).
Parts: Voyeurmods quad 120mm heatercore
Swiftech MCP-655 Pump...
I'm planning on making my own custom watercooling enclosure this x-mas.
I'm going to have a Custom acrylic display case company build me an acrylic case to the required spec's.
I'll be putting a DangerDen BI extreme II radiator
4x 120mm Fans in dual push / dual suck
criticool waterplant...
I'm helping my friend Oc his CPU only in his new rig.
Hes running an Asus A8N-Deluxe sli mobo
a 3200+ venice (1.45V, 10x, 2.0ghz stock)
Corsair value select 2x1gb sticks
I've been researching/reading his manual for his mobo and Ocing his Cpu with stock HSF should be pretty easy...
As the title reads, I got a 2400M but it only does 2.55Ghz on 2.0V with danger den watercooling.
I want to get 3ghz off my watercooling setup. And a new chip seems ideal.
If you got a chip thats done nearly 3ghz onw ater, or 2.7+ on air under 2V, e-mail me at [email protected]
Tell me how...
Well I finally had to clean out my case due to something massivly gunking up my case with dust.
Its been a year since I installed my watercooling, so I decided it would be time to flush the system.
I emptied the coolant and threw in Isopropyl alcohol + distilled water. I let that loop in...
Based from DFI-Street forums: http://www.dfi-street.com/forum/showthread.php?s=&threadid=798
If you got KHX 3000 mem that overclocks for crap..
SImply jump your vdimm as far as possbile (dfi infinity, 3.3vdimm) and run memtest 5 for 60-72hours and burn them in.
I went from 190fsb to...
I was kind of expecting this card to be .11u with 8 pipelines, to be a real midrange card for their new lineup.
hell I would been almost happy if it was a .11u with lowK and some 900+mhz memory.
I was really hoping ti would be a kick ass overclocker up to 900mhz core on par with 9600...
I currently have an Antec true430
My small problem is the 3.3v rail is averaging 3.22V and dips down to 3.09ish V under heavy load and heavy overclock, (my sig) I think this is causing some instability when it drops too far and my system reboots occasionally.
I need a 2nd psu for my old...
Does anyone have a 3/4" ID watercooling setup? I've found pumps and tubing (tygon), anyone know if its ahrd to find the ability to do 3/4" id on a waterblock/rad?
My first watercooling rig:
I did a full writeup on my entire mod process and have my overclocking results in there also!
Linky with more pics etc at http://unoid.net/watermod/
I have some kingston hyperx 2x512 3000 memory.
I would WRATHER NOT take off the heatspreaders to find out what kind of winbond's I got..
Users who know what winbond's they got and they stickers on their spreaders please give me your educated guess as to which chips mine sticks have. thanks.
I bought KHX 2x512 3000 from enwegg beucase some guy advised it was great memory. I should have gotten the mushkin 3200 222 special or some pc3500 so I can jack up my fsb.
I can't get my me to go any higher than 190mhz 2-2-2-11 @ 3.1V
I've relaxed my timings to cas 2.5 with 3-3-11 and cna't...
Since the search feature is disable its kidn ahrd finding this info out.
For those who're up to date can you comparativly tell me how well this proccessor will perform, It'l be on water, danger den style.
I currently have two WD2mb cache 7200rpm 100gb hd's
I use them with raid 0 on my abit kg7-raid.
My new mobo (DFI Ultra Infinity nf2) has 2 ide channels but 4 sata + sata raid.
obviously there sno PATA Ide raid.
are there adaptors thatwill let me plug in my two PATA hd's into the sata...
I am wondering if Instead of buying a router, can I plug two computer into the surfboard 4100 modem via ethernet and also USB cables and somehow use the internet on both computer like that?
I've got roughly 450 for an upgrade: MOBO, RAM, CPU
I'im getting a 4 month used danger den WC setup from a friend at a discount:
-Maze 4 AMD clip mount setup,
-Black Ice rad, and an Antec 120mm fan.
- Eheim 1250 Pump,
- little plastic res.
Its setup and barbed for 1/2" I only need to...
I have an ati radoen 9600pro and a Sony G520 21" trinitron monitor.
my desktop is set at 1280x1024x100hz
when I wanna try 1600x1200 or higher for desktop the only working refresh rate is 60hz.
if I try 70,75,80,85 which my monitor definatly supports I can physicly see the screen...
Howdy,
I currently have a SB audigy Platinum EX working in tandom with a Cambridge DTT3500 (creatives best choice for 5.1 digital speakers at the time).
Have anyone had any problem using the 5.1 DIN connector?
The way it sets up is using the alrge digital DIN cable that is round and...
I'll try the Digital DIN again, ALthough last time I tried using it I got cracked up sound and not much of it. I'll try it out again though.
DVD ac-3 playback in 5.1 is perfect working using just optical atm.