Currently have a dual E5-2670 setup on an SM motherboard.
Getting a bit of an upgrade itch. I'm debating if its worth going to thread ripper or just scooping up a pair of E5-2667 V2s or E5-2697 V2s.
Dual E5-2696 seems to match on multi threaded loads, Dual E5-2667 seems to be similar on...
ZFS development has been pretty active on Illumos, BSD and Linux the past few years. From a stability standpoint does it even matter what platform is used to run ZFS. For example is Linux now as stable as Illumos or FreeBSD with respect to ZFS?
I appreciate any feedback.
Thanks!
Hey folks,
Any opinions between the two? I've tried them both out and they seem to work well.
If there is one thing that I don't like about Seafile it's the file system that it uses (this can be an advantage too). Seafile is also really fast but Owncloud appears to be decent for my data set...
Any thoughts as to whether or not this case could provide proper air flow to a dual Xeon? Not exactly sure about it's intake or how it would do without water. The alternative would be a Supressor F51. Thoughts?
I'm currently using an NEC PA271W 2560x1440 display and a second 26" 1920x1200 monitor (prefer reading on this).
Recently saw a friends wide display that caught my attention. I'd like to go up in size and maintain or get better screen real estate in a single screen solution.
What is an ideal...
New Build. Will be a Dual Xeon Setup. No plans to overclock. Just want something quiet for the home office.
Currently looking at:
Define XL R2
Thermaltake Supressor F51
Enthoo Luxe
Enthoo Primo
Any thoughts on these? I'm open to any other suggestions if you have them. I'm really...
Hey folks,
I'm putting together a dual Xeon E5-2670. Very little drives. A single 980ti, possibly more down the road.
I'd like the machine to be quiet so want to keep fans to a minimum if possible. I believe SuperMicro supports PMBus but I'm not sure what it does :)
Would you go with...
So I've been using an i7-920 for many years now and lately the machine just hasn't been stable.
I want to upgrade but I feel like Skylake isn't well suited as I could use more than 4 cores (I'll use AWS sometimes for certain tasks).
Right now there is a fire sale on these E5-2670 chips...
Considering Bitfenix Pandora, Lian Li PC-V359 and possibly Phanteks Enthoo Evolv.
No water or anything like that just a workstation PC for the office. Don't even need more storage than either a SSD or PCI slot.
Thoughts?
I'm putting together an ITX desktop system.
Basically going to do.
5820
16GB DDR4
Asrock X99
Gtx 970/980
1 SSD
Possibly a cooler like X61 Kraken
Can I get by with 450-520 watts? Eg Seasonic fanless or am I better off moving up higher?
I have an old anec signature 850. It's not even made...
Hey folks,
I am looking for a M.2 to SFF-8639 adapter. I tried asus Hyper V kit but it was a little bit too short so it didn't quite fit my motherboard. Anyone know of one that might fit a standard slot? My board supports M Key 2242/2280.
Thanks!
Hey folks,
Looking at putting together a decent performing mini server using a Xeon 1540D processor. The case that I am using will only have 4 3.5 Bays so I prefer to use higher capacity drives.
With respect to the 4TB and 6TB drives that are available the price difference between say WD...
Hey folks,
I'm looking for 6 drives to use in a new NAS setup. The case appears to be restricted to 2.5" with 9.5mm drive slots. Aside from SSD, WD Red 1TB or Samsung M9T what options are available. Looking for decent performance in a small package that doesn't break the bank.
I...
Hi folks,
Hoping that one of you can comment on the compatibility of either of these boards with pass through on an ESXI system. Is this possible? If so are there any limitations?
Would like to hear some thoughts on the below UPS models. The first might be overkill but not sure. I need to power multiple monitors along with my system which is using a 850W PSU.
I'm currently looking at the following models:
CyberPower PR1500LCD Smart App Sinewave UPS 1500VA...
I owned a X25M which worked flawlessly for years. Decided to upgrade to a 520 and my sudden has become unstable. Random BSOD's.
Anyone else having issues with this drive? Any suggestions on what to do. Should I get a refund and go with something else?
Which one would you go with?
I have absolutely no use for games. Will be used for development and other applications which run 24/7. Some photoshop/lightroom. Possibly some additional vm's. Needs to have at least 12-16GB of ram. Not too concerned with overclocking, stability is the most...
Hey everyone,
Been running my system @ 3.8 on air but for some reason as of late I've had a little bit of stability issues. Looking back I don't think I ever ran the system through a torture test and just assumed that it worked well if I could run it @ 100% for 10-20 minutes.
Anyhow this...
Looking to add some screen real estate for business apps to my existing NEC 2690UXI2.
I don't need anything that is color critical. Just something that works well.
What are some decent monitor at these sizes, should I consider the dell 2209 or ST2210?
Opinions?
Also, any...
This drive is really weird.
I have two of them. Both setup as RAID 1.
I sent one drive back to WD because when you would power it on without the SATA connecter plugged in the drive would just start seeking which seems extremely odd.
Got the new drive, does not do this. Now, the other...
I'm looking for some drives to setup in Raid 1 and have pretty much narrowed my choices to the Seagate 7200.12 1TB or WD Green Power 1.5TB. Both of these drives are using 500GB platters.
It's important to me that the drives be fairly quiet, I current have some RE3's which I am replacing...
Hello everyone,
I'm considering purchasing the WD Green/WD10EADS and I would like to use this in a desktop setup for Raid 1. I'd like to know if there are any caveats in choosing this drive over say the RE2-GP? I realize that this drive has TLER disable by default but I've downloaded the...
Am I nuts or is this drive loud! I've done my best to put together a PC that can be extremely quiet and this is by far the loudest component in my system, so loud that I am considering returning it and going with a large low power disk for mass storage.
Anyone else feel the same way about...
Well I find this really odd, I just finished putting together an i7 920 using an Asus Revolution. The system is running stable @3.8Ghz (19x200). Ram is running at 1600 with timings of 8-8-24-2T.
Here are my results with geekbench:
http://browse.geekbench.ca/geekbench2/view/127030
Notice how...
From what I have read the Asus Revolution can definately handle 12GB of Ram and OC pretty stable. Do any of you know if the Gigabyte boards have problems when all ram slots are full? I was considering the GIGABYTE GA-EX58-UD5.
Hey everyone, I'm building a simple desktop but would like to keep my data storage drive setup as RAID 1. I'm trying to determine if I need the regular WD Black drive or the RE3 version. Is there any point in looking at the RE3 if I am going to be using the drive in a Raid 1 setup?
Thanks!
Looking for a nice quiet case that can also cool my CPU and GPU. Will be cooling a i7 920 and 4870 or GTX 295.
Out of these cases, which one would you folks recommend:
TYR PC-X500
SilverStone TJ10
Antec 1200
Antec P193
Thanks
I'm looking to get a rock solid OC from a 920 to either 3.6 or 3.8. Which board would you guys go with? Are the workstation boards more stable then the deluxe or is it just marketing from Asus?
These results would confirm what Toms Hardware has said:
http://enthusiast.hardocp.com/article.html?art=MTU4MCwzLCxoZW50aHVzaWFzdA==
Please tell me this isn't true,is there anyway to get around this via a bios setting?
Overclocking is very different on the Core i7. Unlike the Core 2 or...
I've been waiting for quite sometime for the i7, but given the overall cost and gains in performance I'm not sure if the price premium is worth it.
My uses will be for Photo Editing, Occasional Games and Software Development. So with that said, I probably have no real use for an i7 other...
Hey everyone,
I need to build a new PC. Currently only have laptops and need something faster. Is it worth waiting for Nehalem or am I better off just getting a quad for cheap and overclocking it?
Thanks,
Dave
Hey folks,
I am looking for a somewhat quiet PSU for the ATI 4870 or possibly the 4870X2 depending on when I finally do end up putting together my new system.
The system will be a Q6600 with 4GB of ram, 2 HD's and 1 DVD player + wireless network card.
With the above components what do...
Hello everyone,
Have any of you tried these chips on the P35 Series Motherboards. Specifically the Abit IP35 Pro or Gigabyte P35-DS3. I've noticed that the bioses for both of these boards were recently updated. So what happens if you try to boot one of these boards with an older bios...
Hey folks,
I am looking to setup a new rig and would like to get some suggestions on what types of drives to use.
Data redundancy is important to me so I would like to use a Raid 5 setup with 4 drives.
I would like some drives with decent performance and that also run quiet if possible...
Can anyone comment on this? Toms Hardware did a pretty extensive review but there is no mention on stand alone Raid 1 performance.
Perhaps some of you can share.
Hello all,
After recently reading a Post by Karl Lang I fail to see how we can benefit from large gamut displays when our video cards cannot send more then 8 bits.
The article can be found at: http://www.outbackphoto.com/tforum/viewtopic.php?TopicID=1700
Perhaps someone could help...
Hey folks,
What are the latest and greatest S-IPS monitors that we should be expenting in the next little while or that are currently available?
It seems a lot of people have their eye on the Nec 2690. What else will be coming out?
Dave