QuantumBraced
Gawd
- Joined
- Nov 21, 2015
- Messages
- 594
While the board itself fits in the case, it's 244mm deep, and even with the PSU mounted flush to the front, there's only 241mm available. So there's going to be 3mm of overlap. The PSU is offset to the left a bit so it'll clear the board's PCB, but the 24 pin ATX connector is right on the edge and will very likely be a problem.
Ah dream ruined. So you're saying with the stock V6 front mount it won't fit at all, you have to double-sided tape the PSU to the front (and toward the left panel) and then it'll barely fit, but the 24-pin probably won't fit?
Turns out the board is nearly a year old, yet this is the first time I'm hearing of it, from OptimumTech's video.