When a card hit a good price during the cryptocraze, miners would have it bought out in seconds.
What you're more likely seeing now is akin to a reverse auction for everyone who has been slogging through the GPU drought. When it hits retail, everyone who had been "holding out for retail" is...
https://www.newegg.com/Product/Product.aspx?Item=9SIAETG6BN8130
Performance
Interface
SATA
Capacity
5TB
RPM
7200 RPM
Cache
128MB
Average Latency
4.17 ms
FWIW, you can pick up a set of PBT doubleshots on ebay for like ten bucks.
https://www.ebay.com/itm/Translucent-useful-Doubleshot-PBT-104-KeyCaps-Backlit-fit-for-Cherry-MX-Keyboard/322879632580
Could you expound a bit?
1. In what way is it loud? I mean, more than blue switches usually are...
Motherboard specs:
https://ark.intel.com/products/50382/Intel-Desktop-Board-DQ35JO
Some highlights:
Onboard NIC is gigabit
Board maxes out at four 2GB sticks of DDR2 (total 8GB)
6 SATA ports
Also, it has VTd enabled, so buying a few of these for a homelab virtualization cluster could be a...
Just to give y'all a heads up:
Doubleshot ABS can be found for less than ten bucks:
http://www.ebay.com/itm/Blue-Double-Shot-Translucent-ABS-Backlit-104-KeyCaps-for-Cherry-MX-Keyboard/232169131467
Hell, doubleshot PBT can be found for less than fifteen bucks...
Pi3b:
https://www.amazon.com/Raspberry-Model-A1-2GHz-64-bit-quad-core/dp/B01CD5VC92/
NES Pi3b case:
https://www.amazon.com/Old-Skool-NES-case-Raspberry/dp/B01M4OOY4U/
Official case ($12 cheaper than the NES one, if you don't care so much about looks)...
It's a reference RX480. Just unlock the other 4gb.
https://www.techpowerup.com/223913/amd-retail-radeon-rx-480-4gb-to-8gb-memory-unlock-mod-works-we-benchmarked
Possibly, but then you have to put up with all the BF/CM noise. If you think this is a good deal and good fit for your budget, pull the trigger and don't sweat it.
It's companies trying to apply the same tactics to 3d printing as ink companies applied to traditional printing. That is, sell locked hardware cheap, even at a loss, because more money can be made by forcing people to buy the consumables -- in the case of 3d printing, filament. And since "Brand...
MSRP on this is at least $130, which is frankly just a pipe dream. MSRP isn't nearly as good an indicator of a hot deal than price history, and this keyboard has been sold new for $50 (which was a very hot deal). In fact, this exact refurb unit was only $60 on amazon less than two weeks ago. $70...
Basically a feasibility / sanity check. What I would like to build is a keyboard matrix (5x16 if possible) which connects to and is read by the Pi Zero's GPIO pins, then acts like a standard HID keyboard via Linux gadget. Ideally built in such a way that one could also still be able to switch...
If you want a cheap but decent gaming mouse, here's this:
ROCCAT TYON All Action Multi-Button Gaming Mouse, Black Recertified With Retail Packaging | Meritline.com
Order online and select local pickup to answer your first question.
Microcenter will also occasionally have odd prices for SKUs that no longer have any quantity but have not yet been removed from the system. So it's more or less a non-deal deal.
True, but they never said that they were going to sell the entire manufacturing run at any one time. IE: They manufactured 100,000 units (or whatever, numbers are from /dev/ass), and initially sold 75,000, holding some back in case of needed replacements, contests, black market sales, whatever...
They feel much as you'd expect -- like decent knockoffs of a Cherry switch keyboard. If you're used to a rubber dome, these are likely going to feel amazing. If you're coming from a CODE or even a QFR, they'll probably just feel "meh".
148@amazon, so nice deal @newegg:
http://www.amazon.com/G-SKILL-Mechanical-Keyboard-Switches-GK-KSR1C3-KM780S10NA/dp/B015VRS4IQ/ref=sr_1_2?ie=UTF8&qid=1445027351&sr=8-2&keywords=G.SKILL+RIPJAWS+KM780+MX
As for the keycaps, since the keyboards are backlit, the caps shouldn't be pad-printed...
For those of you who saw last week's installment, we showed you how to make a cheap chicken fryer out of a heat gun, wire hanger, hubcap, k car, and a whack of the handyman's secret weapon.
So this week, on Handyman Corner, we're going to show you how to rebuild your house from the ashes up.
Potentially. Hair dryer will still run at least ten to twenty bucks, and to me it's worth whatever past that not to have to stand in the kitchen for a half hour blow drying my dinner. Or worry that whatever stuff I threw together to MacGyver the salad bowl and hair dryer together so that I...
They usually have good deals on cables. Also, this case is nice:
http://www.monoprice.com/Product?c_id=114&cp_id=11401&cs_id=1140106&p_id=10578&seq=1&format=2