I tried the BIOS reset multiple times.
I verified that the 5600 CPU and motherboard work on my PC by replacing the RAM with a friends kit.
What I don't understand is why my old ram won't work with this new CPU, but works fine with older. I even went back to the old CPU to make sure the ram was...
Hello,
I updated to 5600 and have been having issues posting.
I have a ASRock b450 k4 gaming motherboard @ latest BIOS. I finally diagnosed it to the RAM.
It's not that the RAM is bad, it works with the 1700X but not the 5600. I verified this by using a friend's ddr4 kit.
Any ideas on what the...
Well I put the 1700x back in and that didn’t work. I had to fiddle with it a bit. Turns out didn’t like one memory stick. Put back two and a bios reset and it was back to normal and workkng. I updated to 5.60 bios while I was at it. Went back to 5600 and no good either. I tried the battery...
Hello I recently upgraded my 1700x to a 5600 and now my pc does not post
I have 16gb ram
Asrock B450 K4 gaming atx motherboard
I was running 3.4 bios on the 1700x. I updated to 5.30 before making the swap and made sure everything was working ok. Even ran some bench marks.
Then I swapped the...
Hi,
I finally got 1gig cable and I want to purchase my modem. I’d like to buy one that will last me another speed upgrade cycle whenever that may come.
ive been looking at two options
1) Modems with multiple 1gb ports (MB8200) that can LA in the future
2) Modems with a 2.5G port
In which...
Hello,
I am just getting into 3D printing and I'm looking for your experience in adding inserts to 3D prints. I have access to FDM sla and sls printers from my work. Are there any types of inserts that work well and hold up better? Which process is better for them? How do you set your hole...
Any other ones besides the iphones?
I don't like large phones and the 10e seems perfect, looking for some alternatives to it as it is a little bit out of my budget.
I have a motor z2 force and the vibration motor doesn't work anymore. I'm looking to replace it but I am not able to find a replacement.
Any suggestions on where to get parts from?
Thanks
I'm looking at two routers.
The EA6900 vs EA7400
The EA6900 is the AC1900 and cheaper than the EA7400 which is a AC1750.
Even their MSRP is cheaper on the AC1900 router.
What gives? Isn't the AC1900 suppose to be better if so why is the 1750 more money.
I'm trying to make a decision and kinda...
This is a free sync monitor, but the 970 doesn't support it so I am not using it.
Connected via DP
All power settings have been disabled. I normally just turn the monitor off manually (I tried the auto off before and same thing).
Maybe something in the BIOS?
Hello,
I have a GTX 970 on a Asrock B450 board.
If I need to afk on a game, I will normally turn off the monitor, only to come back with the game crashed.
I found the culprit to be the monitor turn off. If I leave the monitor on, no crash.
I think the video card is going into some kind of...
This just started recently happening where if I power on, nothing happens. I see some lights on the motherboard(RGB), but beyond that nothing (no num lock of any of the keyboard lights, no mouse RGB lights) and ofcourse black screen.
If I shut down and keep powering on eventually it will boot...
Those new cards will be out of my budget.
I am talking used market. Actually thinking about a 970 now instead of a 1060. Im on a tight budget.
So lets say I get a 970 and go ahead a buy a 75 Hz monitor with free sync. can I still use the 75Hz display, just without the active sync right? or will...
I am in works of upgrading my video card (have a 7770 lol), looking to get a used card right now and in the future I will upgrade my monitor as well.
Is sync(free sync, g-sync) really that good?
I've been searching displays the freesync displays are so much cheaper than gsync, is this always...
Changing my rig over from a and 785g Mobo and phenom ii to an h77 and an i3.
I been on this setup for so long and am really dreading a reinstall of windows
Can I get away with changing mobos and CPU and just using the same hard drives without a fresh install?
I don't have raid
Looking for cheap as possible that can take a x16 GPU. Everything else is pretty much gravy. Would like 4x memory slots, but can live with 2. Don't care about overclock as I don't have a k CPU. Ivy bridge support would be awesome for future i7, but again not really required
Any size
It requires a wired connection and it would be crazy to run a cat5 there from my router. Can I buy another router or something and use the internal switch inside of that to connect to the box ?
Thank you
Would it be possible to rip out the motherboard and put it in a regular at case and use a standard power supply and graphics card with these SFF systems?
Thank you
I don't need to buy a subwoofer right?
What does keep it low mean? If I turn it up all the way I could blow them? There is no safety for that?
I'm a sound system noob.
Moved into new place previous owner left 4 of these. I have no idea the condition of them. Is there a economical way I can hook these up to my TV?
So I've finally decided to give up my Phenom II and go Ryzen.
Can I be lazy and just put in the old SSD into the new mobo?
I really don't want to do a reinstall of everything.
I will though if there will be great benefit!
Thank you!
Hello everyone.
My MSI 785G-E53 mobo all of a sudden stopped detecting all my hard drives. I don't have any RAID setup, just 1 SSD and 2x regular drives in AHCI mode.
If I do a reset on BIOS it will pick it back up, work for a few days and then loose it again.
Any idea what's going on?
Trying...
CPU runs great,
It does unlock to 4 cores, although I've never run it too much with 4 cores as this was just a browsing PC and I wanted to extend life as much as possible. The motherboard does have video card built in so no need for a separate card.
Looking to get $100 shipped or make me an offer.
I just wanted to chime in that I also had a great experience with xfxsupport gentleman here at the forum. He was able to clear up some issues for me.
Here's to hoping I get my card fixed or they don't send me a lower model in return.
I am thinking of dual booting windows 7 and one of those two(unless you have a much better suggestion) linux distros. Which one would be nicer of the two? I am a new user and not really interested in getting into the nitty gritty. Just looking of someplace that comes with good basic apps and I...