Search results

For Sale: Prototype mini-ITX and micro-ATX case frames. The mini-ITX frame includes a Danger Den 3-slot IO bracket, for $65, plus whatever the shipping charge is from Washington State. PayPal only. The frame measures 13-3/8 x 10 x 8-1/2-inches (D x W x H). A 120mm fan will fit at the back of...

(4) CONSOLIDATE Threads. Do not post multiple threads, keep all your FS/FT deals in one thread, and all WTB/WTTF deals in a different thread. You should only have one FS/FT and one WTB/WTTF thread active at any one time. When making a new thread, include items from the old thread.

Here's a box to hold a SFX-size PSU, fan controller, and 560 radiator. An EK Water Blocks reservoir will eventually be mounted on the side.

Here's a custom mini-ITX case frame. The PCI backplate was cutdown from a CaseLabs Bullet replacement panel. The client will be applying acrylic panels to the frame.

This prototype microATX case frame with a Lian Li microATX motherboard tray is for sale for $50, plus whatever the shipping charge is from New Hampshire. The PSU "chamber" is sized for a SFX PSU. PayPal only. The frame measures 15 x 12 x 2.5-inches (D x W x H). Extrusions are 15mm square...

This case frame is meant to hold an ATX motherboard, two PSUs and 6 GPUs. Nine fans can be attached to the frame via the metal tabs. The final location of all of the components is completely adjustable. :)

I built a radiator stand for a Alphacool Monsta 560 and fan controller:

A was asked to build a test bench for the miniITX form factor. This can handle a SFX/ATX PSU and 1x SSD/HD. Thanks for looking. :D

This case features: High-quality CaseLabs replacement parts (5-slot IO panel, radiator mount and hard drive cages). Front mounted 140mm and 120mm fans fed by a built-in air duct. Individual panels attached to the frame via "hidden" bolts. The case is 14.75 x 10.75 x 16.5-inches...

Here's a compact tech station re-sized a bit in order to mount the PSU directly underneath the motherboard.

This is a large two-piece all-on-one case that has enough room for a drop-down keyboard tray, large monitor, ATX motherboard, SFX PSU, 1x DVD, 1X HD and 2x SSDs (via a CaseLabs SSD mount). The front of the case (to house the monitor) can be separated from the back.

This heavy-duty all aluminum compact modular PC test bench (tech station) supports a bottom mounted power supply, two 3.5-inch hard drives or three SSDs and one 120×2 or 120×3 water cooling radiator (in the lower tier). More radiators can be mounted around the edges of the upper tier...

I'm gauging interest in a case/replacement "drawer" for IKEA's Helmer cabinet to house a storage rig. The case is designed to hold a full-size ATX motherboard, power supply and 12x hotswap hard drives via 3x Intel AXX4DRV3G SAS/SATA four-drive hot swap drive bays. Cooling is provided by...

I'm gauging interest in a case to house a miniITX motherboard, SFX power supply, 8x 3.5" hotswap and 2x SSDs. Click on the image for an animation of the model:

SOLD Prototype replacement "drawer" to turn half of an IKEA Helmer cabinet into a stylish personal computer. Mount one miniITX motherboard (room for 160mm tall heatsink). ATX PSU. Full-length GPU (11.75-inches). Room for three 120mm fans (two in the front, one in back). Install one...

A custom all-in-one open-air PC case (monitor stand with attached case). Please pardon the old rig any teeny-tiny monitor. :eek:

Here's a server case I made to house a H8QGL-iF motherboard. The PSU will lie at the front of the case. SSDs will be mounted underneath the pair of extrusions across the top. Front: Side: Back:

Here's a modular tech tray ("drawer" replacement) for Ikea's Helmer cabinet. You attach a drawer front to the tray via the handle. Its completely modular, so you can decide on the final placement of your rig components. Top view: Bottom view; More info here. Thanks for looking, Rich

Selling a prototype of my compact tech station (test bench): This prototype is 20mm narrower than the station I have for sale on my website, and the expansion card support beam is a bit taller/thicker. The build material used for this station is unlike all others, offering the ability to...

You guys might find this interesting. Here's a couple of open-air storage "cases". For 12x HDs (below) and two rigs (up top): And another for 10x drives and 2x PSUs: Thanks for looking.

Selling another prototype! This time around its a one-off of a Bitcoin/Litecoin "mining tray" built for two PSUs (mounted on edge): You could also use this for benching or F@H, by removing the "floating GPU" support posts and beam. $65USD plus whatever the actual UPS shipping...

One (1) ATX/EATX tech tray (as pictured) ready for immediate shipment. This is the same tray I normally sell, minus three posts and the horizontal "fan/radiator" beam. The motherboard is mounted on 7/8-inch tall aluminum threaded spacers with 1/4-inch stainless steel socket cap screws...

One (1) small open frame ATX tech tray ready for immediate shipment. The motherboard is mounted on 7/8-inch tall aluminum threaded spacers with 1/4-inch stainless steel socket cap screws (all fasteners included). One (1) SSD/HD is mounted via soft rubber grommets. The PSU rests inside the...

I'm thinking about offering DIY PC case kits. A kit would include all of the material and hardware to build the frame of an ATX or microATX PC case (along with pedestals). The frame would consist of 15mm t-slot extrusions cut and pre-tapped for easy assembly. The case would be designed to...

I'm selling the prototype of my small open frame ATX tech tray. The motherboard is mounted on 7/8-inch tall aluminum threaded spacers and 1/4-inch stainless steel socket cap screws (all fasteners included) The super strong, all aluminum t-slot construction is perfect for LN2 benching and...

I'm selling the prototype of my 2T-ATX station, including all of the necessary fasteners, standoffs, tools and extra bits of extrusion and angle brackets. The only thing missing are the end caps. $105 includes shipping (via UPS) to the lower 48. The t-slot extrusions allows you to mount...

I thought it might be a good idea to turn my mother trays into full blown cases. Some of the features/details of these very simple cases are: ~5U tall i.e. room for tall CPU coolers Exact same size as my 4p/SWTX-size trays and therefore use the exact same top Stackable (space/material...

EDIT: This thread has led to the development of a whole line of products! Visit my website for more info. I have this idea for building a batch of simple motherboard trays for benchers from T-slot extrusion. I don't know guys, would anyone be interested in such a thing...

This is a project/build log for an aluminum case designed specifically for a large water cooled rig, specifically: 3 x 140x4 radiators 1 140x3 radiator 10-slot motherboard tray Stay tuned!

This is a project/build log for a custom case to house both a storage server and gaming rig. This fairly compact case is designed to hold: Two EATX motherboards Two ATX PSUs Twenty four 3.5-inch hard drives Six SSDs Two 120x3 water cooling radiators The size of the...

I recently completed a couple of external radiator cases and someone remarked that the smaller version would be awesome for housing a micro/SFF rig. The use of over-the-top .10-inch thick aluminum sheets, 1/2x3/4-inch solid flat bar and 1/2x1-inch u-channel (for the frame) makes...

Part of my next case project includes fabricating some shrouds for 140x4 and 140x3 radiators: This afternoon I cranked out a pair of these shrouds from .25 x 1.25-inch aluminum flat bar. These heavy duty shrouds have no equal.

I've been commissioned to build an external radiator case which is destined to sit on the top of an 800D. The case will be made entirely from aluminum and built to house two triple radiators. Here's a drawing of the case: The frame of the case is made from 1-inch channel, 1/2 x...

I've been commissioned to build a very large wooden case to house his upcoming watercooled EVGA Classified SR-2 rig. This case is designed and built to run cool, quiet and be ultra-flexible for future upgrades. Note how the side panels are constructed as air ducts for...

The Large Wooden Tower case build is done: (That particular case was sized to hold an EATX MB and two 120x4 radiators in the top chamber. However, the basic design of the case could be easily adjusted to accommodate 140mm radiators, EVGA's 4-Way SLI MB, etc.) This next phase of the...

Is there any interest here for a micro-ATX made out of wood? I'm trying to gauge whether there is a market for such a thing, especially if the cost turns out to be quite a bit more than most of the mATX cases that get recommended here on this forum. If you think its a good idea then...

Final pics are here. I'm very fortunate to have been commissioned to build a large wooden tower case, to be used to hold a large water cooled rig. The design of the case was born from Mick64's 'Case Design for Liquid Cooling' thread over on XtremeSystems Forums. I'm a wood worker, not a...