Search results

Well, after literally about a year in the works my office is almost complete. It was really centered around the NCASE. I love this thing. Small, powerful and sexy as hell. Have it hooked up to 3 27" DELL 1440p monitors running Windows 8.1 and Yosemite, with a 980 GTX in a full GPU/CPU loop...

Any real significant difference between these 2 models besides warranty and longevity?

I am thinking of getting a GTX 980 SC and using this PSU. The GTX 980 SC I believe has 2 6 pin power plugs but the PSU only has 1 blue 8 pin PCIe out. How would I wire this card? Thanks! Edit: NM seems it has dual 6/8 pin PCIe

Something I should have done a long time ago. I just had to try the AMD 295x2. It's a great card and the system is great but it deviated too much from my love for small and powerful build. Parts, some left over from previous builds. ASUS Impact VII i7 4790k EK CPU water block 2 Samsung Pro...

I built a pretty nice gaming rig awhile back. It's nice and powerful as all hell but I don't use it enough so I'm thinking of going back to smaller with a hackintosh hybrid. The trick is I need a card that can game on a single monitor but also support 3 1440p minidisplay port monitors. The only...

SOLD

Well I wanted an NCASE M1 v2 super bad but in the end it was too small for what I wanted to build safely for the 295x2 card so I am going to try this very similar looking case and I'm nuts. 280mm radiator on top 140mm radiator somewhere, I hope CPU and GPU loop CPU - 4770k Board - ASUS Impact...

Anyone get one of these yet? I just got one today and stuck it between 2 DELL U2713HM. It's a nice panel. Bezel is good. 4k is so damn small it made me realize I really have to start wearing glasses. No dead pixels. Good screen. Gonna World of Tanks later on 4k and see how it works. A little...

What is the most powerful ATX PSU one can fit into the NCASE v1 or upcoming v2 that has a 12" 2 slot GPU?

I am thinking of my future NCASE M1 v2 build and am getting the storage sorted. I am debating getting an ASROCK z87e-ITX while I can, so I can use the mSATA with a 1TB. The question I have is, should I go with m.2 instead? I'm not in a hurry to get parts but the mSATA option on ITX seems scarce...

SOLD

Can this card: run 3 monitors in 2-way SLI @ 1440p? I already have one and wondering if I should just get another. Never done SLI before. How much better are the TIs for this? Also curious what the difference is between the dual fan and the turbine fan type. I am going to go liquid. Are...

Does anyone know if you can fit SLI with say two 780ti cards in this case? Watercooling possible? http://www.newegg.com/Product/Product.aspx?Item=N82E16811147212

The original thread is so huge and I'm really only interested in the delivery of v2 in August sometime. Thought I'd start a thread specific to this version to share ideas and builds on it. Not sure if there is one. What do you guys plan for yours when you get it? I plan on moving from a sugo05...

I was using a Fractal 304 case with 6 drives in it running Xpenology with an i7 H87 ASUS Plus mITX board. It ran great but I need to add some drives so tossed em in a U-NAS with this Avoton Motherboard that I've been dying to use. It all works with 2 i210 LAN and PCIe LAN e1000 Intel Pro NICs...

Moved everything from a Rosewill U2 case, Jonesbro, into an L1. Didn't need the room of the U2 and was still limited to mini cards if I ever really did I guess. Only downside is I was running about 10 degrees C cooler with the other case but much happier with this stealth mini hackintosh build...

WTB: Lowend Haswell CPU up to i5 and DDR 1333/1600 RAM 2x4GB or 2x8GB

Is there a dual slot card that could run 3 27" monitors @ 2560x1440 for a game like BF3 on medium?

http://www.monoprice.com/Product/?c_id=113&cp_id=11307&cs_id=1130703&p_id=10734&seq=1&format=2 I have been needing a 30" for awhile. I need real estate. Yes I looked at 27" high res monitors but for some reason I wanted more screen as well. That's my preference. I bought an HP zr30w from Best...

How well could I overclock my 3770k in space? Would I even need a fan?

Well a lot less with RAID 10. Fractal 304 black (6 drive bays) ASUS H87I-PLUS (6 SATA III Ports) Haswell 4770 16GB Vengence RAM 1600MHz 6x4TB Reds SeaSonic 520W Platinum Modular PSU Corsair H60 (H90 didn't fit the socket due to caps getting in the way)

SOLD

I am building a NAS with a bonded quad port Intel gigabit NIC. This should, theoretically, get me 4 gigabits of throughput from all the connected devices/VMs. Now my question is on the disk side. I have an ASUS P8H77-i mini ITX with 2 Sata III and 4 Sata II ports. I am going to install 6 disks...

$100 shipped Supports a lot of cool stuff, LACP LAG, VLANs and Port Trunking. Easy to use. Works great. http://www.newegg.com/Product/Product.aspx?Item=N82E16833122138

I have 4 NC360T Dual Port Intel Gigabit NICs for sale. $30 each shipped or all 4 for $100 These work in PCI-e 1x, 4x, 8x and 16x slots. Check your MB for compatibility.

I have 4 NC360T Dual Port Intel Gigabit NICs for sale. $30 each shipped. $100 for all 4. These work in PCI-e 1x, 4x, 8x and 16x slots. Check your MB for compatibility. Long bracket

Sold

Updated 11/07/2013 Routing schematic: ASUS router side: Netgear side: Access in and out is working well so far and the .0 network is talking internally to the switch across the VMs. Also have a DHCP VM on a new br1 on the .1 network that servers DHCP to the .1 network and that works...

I have 4 drives in 4 separate machines. 3 ubuntu ivy bridge VM hosts and a laptop. Here are the results. This is so ass backwards: MacBook Pro with Samsung Pro 840 512GB: dd if=/dev/zero of=/tmp/test.img bs=1000000000 count=20 20000000000 bytes transferred in 153.998735 secs (129871197...

I had a lot of fun building this PC and testing it out. It's a great build, loaded with all sorts of stuff. I mainly built it for Diablo III, test out the new IVY chip, and potentially an HTPC. In reality I'm never going to use it much. My loss is your gain. This is $1600 current day parts. Get...

Good card? Anyone game over HDMI?

I decided to mess around with the newly discovered TIM bound IHS on the Ivy Bridge CPUs. First step is removing it: This tool works VERY well. Others that are thicker don't. Get it if you can at Home Depot: Place the blade on each corner and firmly press into the corner. Don't saw! It...

I've been waiting a long time for a new PC build. The last few months has felt like years alone waiting for Ivy Bridge and more importantly this Asus board. So with newegg selling the Asus it was time to score all the parts. At the bottom of this post are video reviews and tests: 1. The Parts -...