Search results

i know its old post but i just noticed i have the same exact thing! i can see the white thing under the screen. so is it normal should i be concerned? its not as near the screen as it should be.

I dont know what a shroud is, but does your antec's fan connect to the pump? when i had it (it was broken anyway) the fan would connect to the pump and pump to CPU fan 1. I had it at full speed in bios (but i dont know if it had direct control to fan) and it only gave me 1400 rpm all the time...

well thanks for the nightmares... i read that it might need washers for the backplate but when i was installing it I figured that the thumbscrew and the standoffs would fix the looseness of the backplate. After it was done the pump seemed stable to me. mounting system is much easier than the...

http://i.imgur.com/um4mxvP.png?1 I feel i should be getting better temps, considering how low the voltage is. its a Corsair H60 (newer edition) and i have it set up as exhaust in rear of the case. Its also in pull from the rad, so the rad is facing the CPU. I figure since i have one intake and...

i get almost 60fps now without lowering settings. as a personal rule of mine i dont blame the hardware unless more than one game is acting up. sure ive had cards in the past that failed when playing GTA4, Crysis and Far Cry 2, but these games generally ran slow. the remedy was high voltage or...

i get this http://www.youtube.com/watch?v=U5rKZAqhdpA the game isnt that demanding, if it were it would be slow in gameplay. lots of people are having that problem this leads me to belive its not the card. lowering clock might be a remedy but its not the cause.

to avoid confusion i updated my sig. why would one game mess up like this but all else is find? a bit presumptuous to blame the GPU when software could be at fault? Far Cry 3 fps isnt dropping and gameplay is smooth, but textures are acting up. I get the feeling MSI afterburner might be the...

the temps are fine, doesnt go above 68c. every game is fine except far cry3. The card came OC'd, but far cry 3 doesnt seem that demanding to me compared to other games like batman AC. How come no one else has this problem? I used to get it with far cry 2 as well, albeit a lot less frequently and...

The artifacts big and small make this game unplayable. i can get a good 8 minutes out of it before i have to restart the whole game. Walls of green texture encapsulate me at random points in the game. im on 314.22 driver so maybe updating will fix it?

this is a conundrum. rar files are still used i think and win8 compression has no options like verification...

which should i depend on? Do all of them work on rar files?

there is nothing to be done? one day its working one day its not? how would a banal virus infection affect usb and cd at the same time, when all it does is infect HDD?

i got the seem problem with a really old PC, any solutions? cant boot from usb or cd. strange.

thats what the benchmark gave me its not that strange since we probably using different gpus, i tested with 670. i dont know if cpu factors into this. and oh my god, SMAA? already another one, how many are there? there is also TXAA and MLAA this is too much...

ive run Batman AC's benchmark to test performance, here are results: batman: FXAA high = max 125 avg 85 16CSAA = max 104 avg 76 msaa 4x = max 102 avg 77 MSAA8x= max 87 avg 64 32CSAA = max 83 avg 61 16qCSAA = max 78 avg 63 that one that looked best and more colorful to me were the...

the visual c++ is annoying but i would leave directx even if its old, its usually installs what the game understands, the game doesnt know about the new versions and the new versions might have done away with the old stuff it needs.

anyone else confused? i try them out but dont see the difference except maybe FXAA adds blur.

but doesnt it install drivers and what not? could mess up whats already there.

What in the actual insanity is this? found it uninstalled it but afraid it might have changed the kernal or something, this is stupid. its not enough i have to open gaming for windows. everytime i play a gow product i regret it dearly.

i moved it around, it does that anywhere in the room. but generally the legs sink deeper into the carpet the further it is from the wall. level or not, the A legs were stable. the t legs i cant get it stable. do you guys fiddle with the feet part? i tried and it still does nothing. if i hold the...

guys i see a lot of t legged galants here, how do you keep it balanced and stable? i can cause the whole desk to shake earthquake style using only one finger! i had the A legs previously but I needed to save space and something easy to balance. but all i got is an earthquake. and yea its on carpet.

ive got the T legs on galant now (it used to be A legs), it says that its max is 82cm but i got it at around 79cm where the stop mark is, is that okay or not? when it says stop do they mean after that point or even on it its kind of confusing. because the max is still a good deal above that stop...

i basically used the icc file from http://www.tftcentral.co.uk/articles/icc_profiles.htm which is much better than what came on the disc, but i turn off its gamma adjustment because its too red while the rest seems to do okay. anyway the gamma now when i test it using this site...

it sounds like i shouldnt clean them at all. operating a nuclear plant sounds safer now. i use a big fat microfiber cloth on the woofer, the cone is like plastic glass kind of thing. i fold the cloth into a cudgel type shape and go over it in circles. but i feel i dont have to, dust mainly...

damn when are they coming out?

dont get the Dayton Audio B652 its changed, now its crap. it sounds worse than a 5$ dollar speaker check this out http://www.reddit.com/r/Zeos/comments/1234wt/21_systems_dac_1251500/

10068 points on my first try, you guys suck at this

i cant wait for those driverless cars, the world needs this so much, dont care, but its much more safer and accidents will be rare! imagine that. of course they might turn against us, but we got their oil they cant do nothing about that ha!

i bet in australia it will be 100$ a month lol what a joke.

okay ive narrowed the list down to these choices: m-audio AV40 Aktimate micro Samson Mediaone 4a Alesis M1 520 USB

thats an interesting question would like to know the answer to that, i know im five years too late.

there is evidence of this? why would they make their own product bad? what would you recommend i aim for? i dont care for built in dac i have a sound card that i will be using. from an old Hardforum thread these were the choices:

im also considering getting dayton B652 bookshelfs the cheap ones wonder if they are better. behringer and m-audio australian prices are pretty high around 200 bucks. the problem i have with bookshelfs is placement, they aint nearfield so i dont know, i want them for gaming mostly.

it looks like 2008 graphics to me.

i dont want them for mixing or whatever, just looking for good speakers at that price range. Need something that can give me bass on its own. im also considering AKAI RPM3, samson mediaone 4a, microlabs. its really hard to know because all i know are logitech and stuff. i probably should get...

this is my first ikea desk and first non wood one, but the problem isnt stability its that a screw i thought i screwed in pretty well months ago came loose. i think the screws arent reliable or dependable if you plan to move this desk a lot. before i screwed it in upside down, but now i did it...

my galant surface was wobbly from one side as one screw was a bit loose so i tightened it with a driver but now im afraid i mightve overtightened it, is that a possibility with these desks? how do i know? i usually just keep rotating until it becomes very hard to do so but i dont force it...

yeah the asus looks awesome, but the price of galaxy is too tempting so shall get that. Im not gonna overclock it, hope the factory overclock is stable. thanks for all the help, one small question though, is it better to have the graphic card on the top pci-e or the bottom near the PSU?

I think im gonna go with the galaxy, its custom in a way since it uses the 680 pcb its just has normal cooling.

i cant have the custom design, only galaxy avaliable is the reference one which is also overclocked. the FTW ($479) is over my budget. Its between galaxy, gigabyte and gainward.