Search results

i already have a Thermochill PA120.3 in my system. i have a spare 120 rad not doing anything would it hurt performance if i put it in my loop,at the minute im only cooling my cpu but i plan to put my gpu and nortbridge in the loop in the next month or so

which motherboard is the best board out of these two and which one do you think i will get the best overclock from a P6T SE or a Biostar TPOWER X58A im leaning toward the biostar because it has an extra slot between the pcie cards so when i crossfire there will be a little more air flow

i have it running on 8

i have just tried using linx and it doesnt load all my threads anyone got any ideas

i dont suppose you could give me their email address and is it only for customers in the us,im in england and i wouldnt mind changing my socket plus how did you ask them for it and how much is it costing for the socket

What would be the correct way to unistall the physx card or update the ati drivers.I have just had a nightmare with my system trying to update the ati drivers,in the end i had to format the system.Would you remove the nvidia card then uninstall the drivers?uninstall the drivers then remove the...

Im getting a new i5 750 tomorrow with a Asus P7P55D and 4gig or ram. I know every chip is diffrent but what do you think i can expect in terms of an overclock, im on a cpu only water loop with an ek supreme block. many thanks fore any replys nick

you turn it on in your nvidia control pannel

it is because you are running with physx off which is why you have a proper score.if you turn physx on it will jump up to about p12-13000 ish i wonderd why my 4870x2 was scoring p15564 which is just above my gtx275 then i got told to turn physx off on the nvidia card and then i would see my...

i have been having a few stability problems with my 955 and MA790FX-UD5 @3.8 2.2HT i wasnt sure if it was the chip or the board. so i put it in my older MA790X-UD4 and low and behold not only is the chip stable @3.8 it only needs 1.45v instead of 1.472v and it is only full loading @42c. does...

yep the graphics card the only thing i can think of, im sure i will fing out tomorrow when the 4870x2 comes.as far as i know that needs the full bandwidth to run propley

a few days ago i posted a thread about my pcie bus not running in 16x but running in 8x. i have just recived my new board MA790FX-UD5P and this one is also running @8x it cant be the same fault on two boards the only thing i can now think of is it it the graphics card (GTX275). i have started...

the wife has given me £240 for a new am3 board and some ram i need some advice on which board to have. i want 8gig of ram which takes £100 out of the equation these are the three boards im looking at http://www.overclockers.co.uk/showproduct.php?prodid=MB-110-MS&groupid=701&catid=5&subcat=1377...

well after 3 weeks i bit the bullet and went back to water dont let anyone tell you air is close to a good water setup because it aint good job i have a very understanding wife anyhow for the life of me i cant get 4ghz stable does anyone have any tips, i can boot into windows from 1.48v...

thats nowhere near as much a pain in the rear end as having to strip it down every six months and clean it out propley and to anyone that says you dont have to do it that often look at this http://www.xtremesystems.org/forums/showthread.php?t=226632

not really no i have had 2 good years out of it but there is also the maintance to take care of as well where as air cooling there is no maintance am now stable @3.75ghz @51c

laing dcc ultra was what failed tyvm

a few days ago my pump failed for the second time in my watercooling history so i decided to ditch it and get a true.im suprised and quite happy with it aswell, i knew i wasnt going to get to 3.8@50c load but i have managed 3.6@50c load and after a bit of curing of the as5 i might be able to...

but i thought the shut down temp was 62c for these chips

is this right i have had watercooling for that long i have had to put the stock heatsink on till tues till my true comes i am @stock speeds and im full loading @56c is this right

which air cooler is the best out of these Scythe Orochi Ten Heatpipe with 140mm Fan Sunbeam Core Contact Freezer Arctic Cooling Freezer Xtreme TRUE

i have just had my second pump fail on me so im thinking of ditching the water all together how far behind watercooling is the TRUE or any air cooler of that spec many thanks for any replys

only the cpu is in the loop at the min i have taken the pump apart and there is nothing blocking it

i have had watercooling for around a year and a half now and i have just noticed my pump has started to vibrate a lot and when i was looking around try to work out a way to stop it vibrating i noticed the base was very very hot almost too hot to touch is my pump on its way out or is it supose to...

at the min which im happy with im @ 257x15 for [email protected] HT Link 2313mhz NB Freq 2313mhz Memorry 514mhz

thats the thing i cant quite get when i overclock via the bus i can get my ht up to 2.4-2.4ghz but when i overclock via the multi no matter what i set in the bios cpuz always shows it as 2ghz

both times i had the ht a 1.8ghz

if you can call ten mhz that much diffrence multi my ram was @500 and bus my ram is @510 so not that much diffrence

i have now tried overclocking via the bus and via multi and i have for it overclocking via the bus gets the best results im sitting @3.8ghz @1.52v and these are the diffrences i have found 3dmark vantage bus score P10130 3dmark vantage multi score P9150 3dmark 06 bus 16523 3dmark 06 multi 15595

not a good thing to see

what is a safe 100% load temp for the northbridge on this board at the min during prime it is topping out at 57c is that safe? can i push it any more ? many thanks for any replys.

what would be the max temp for 24/7 use

it fluctuates between 1.488v and 1.504v temp goes up to 49c

at the minute im running @3.8 on my 940 and that has peaked @50c do you think i will get more out of it when i get my new ram. at the minute i can only run my ram in single channel because the ram sticks are too thick on my old board channel 1 was slots 1&3 on this one it is 1&2. does running...

i have just rebuild my water cooling new triple rad and put a gpu in the loop my load temps are lower now than they were before shows how bad my old rad was but now i have a huge delta between the cores my load temps are 57,51,57,51 should i just leave it considering my max load temp is lower...

can i crossfire a 4870 with a 3870x2 and if i can what kind of results do you think i will get if i can

i can understand where you are coming from but i would rather have the heat getting pumped out of the case than have it left in the case

3dmark 06 loop my friend

i disagree the stock cooler isnt sh*t mine right now is idleing @48c and loads @65c with the fan running @33% i have had the core clocked up to 865 and the temp still didnt get above 75c

i have also heard of ppl busting it at that speed also lol