I need to add one additional computer to my fleet. I usually build rather than buy because I tend to have special requirements (such as silence or ECC RAM, etc.). However, for this computer I don't have any special requirements. (Please feel free to suggest that I just buy an off-the-shelf PC if...
This will be my 3rd such build, all guided by this forum. I built the first one in 2010 and the 2nd one in 2012. So I'm a bit overdue.
1) What will you be doing with this PC? Big spreadsheets, and lots of content creation including audio editing (with Ardour), some image editing, some software...
Can anyone recommend an SSD to replace the Seagate Momenus Thin drive, which is only 7.0mm thick? I bought a Crucial M4 only to find out that it is 9.5mm thick and will not fit in the case. NewEgg doesn't allow searching on the thickness of an SSD, so I'm having trouble finding a suitable drive...
Hi - I want to upgrade my motherboard, CPU, RAM and video card in a system I built about 14 months ago with the help of this forum. I'll list my current system parts below.
What will I be using the computer for?
Text-based work including software development, research, writing, web browsing...
Before I pull the trigger, I just want to check and see if the Crucial M4 is giving people good results with Linux.
I have not decided on a distro yet. I'm considering:
Ubuntu 11.10 with Ext4
Linux Mint 12 with Ext4
OpenSuse 12.1 with btrfs :D
Based on this link, I think I'll be OK, but...
I may have to replace my mobo. It's a:
I would really like to have the same board layout as the existing mobo so that I don't have to change my wiring or case. The case is modded slightly to make everything (especially the fans) fit the way I want them to fit. So keeping the same placement for...
I'm running Ubuntu 10.10 with a GeForce GT 430. I just plugged in my ZR30W and the maximum resolution the nvidia configuration tool will allow is 1280 x 800.
I have two monitors connected. The other one is an HP L2335 running at 1920 x 1200. (I used to have two of these connected and the...
For programming and text-based work (and watching videos while not working), is the zr30w worth the extra cost?
I could buy two 27" monitors for significantly less than one 30".
(But if I buy the 30", I'll use one of my existing 23" monitors as a 2nd monitor.)
I mainly want crisp text and a...
I'm looking for a 2 TB external HDD. I would like USB 3.0. (If it also supported GigE that would be great.)
I looked at this product by Eagle Tech, but it has only a WD Caviar Green 5400 RPM drive inside...
So then I thought about buying a bare drive and an enclosure, but I couldn't find a...
I have a ZALMAN 9500A-LED 92mm 2 Ball CPU Cooler in a PC I built in 2006. The fan is starting to make noise. What's my best low-cost option? Can I replace the fan? Is it worth it? Does anyone have links to a replacement fan? Thanks
I have purchased two of these from Amazon so far and neither one works. I'm looking for the mini display port to DVI adapter so I can plug in a 2nd DVI monitor to my iMac. Can anyone recommend a suitable part? Hopefully I don't have to buy the Apple item.
In addition, I wouldn't mind buying...
I put my system together tonight and booted into the bios. There is no OS installed yet. I was just watching the CPU and system temps in the bios, checking fan RPMs, etc. I ran the system this way twice for about 15 minutes each time without the cover on the case. The CPU and system temps were...
What is the best silent video card for this monitor?
$1132 - Smart Buy 30IN LCD 2560X1600 1000:1 ZR30W Dvi-d Dp 7MS S-ips U.s
The card must be Linux compatible (including suspend/resume & hibernate). I'm running Ubuntu 10.10 64 bit.
I just ordered all the parts for a complete build here...
I'm looking for component recommendations. I have replied to all the questions from the sticky. See my notes below those replies for more details.
1) What will you be doing with this PC?
I need good, crisp, clear text display (for software development and technical writing work). I will be...
I'm looking to upgrade in order to achieve a much more power efficient system and I also want to simplify administration.
My current home file server consists of two big Ubuntu boxes. One is a 5U server-quality dual Xeon box with two Areca RAID cards and 8 SCSI drives + 4 SATA drives. The...
How or where can I find out if this is fixed?
I have a brand new Areca 1220 and 4 Samsung HD103UJ that have been sitting on the shelf due to this compatibility issue. I'd like to use them now.
I would appreciate some suggestions regarding my backup strategy for my home file server.
My question is whether my source drive (data to be backed up) and target drive should be on the same controller or not. I need to put this into context, so here's the rest of the info. (Please read on...
Here are some examples of hdparm results on my Ubuntu Hardy server. These are from a RAID-5 array on an LSI MegaRAID 320-2E SCSI controller with 4x Seagate 15k rpm drives.
/dev/mapper/sdX_crypt:
Timing cached reads: 1378 MB in 2.00 seconds = 688.89 MB/sec
Timing buffered disk reads...
Anyone want to jump into the debate going on over here:
http://ubuntuforums.org/showthread.php?t=865477
It has, at least in part, turned into a debate about whether this benchmark is any good. What is the link to the original SR benchmark? Does anyone know what controller was used?
Please...
This is an idea I just thought of regarding HDDs that act up with certain RAID controllers. Bear with me while I explain it. I have the ARC-1220 controller and 4 Samsung HD103UJ drives. They aren't playing nicely together.
All other HDDs I have found are more expensive. And the Samsung drives...
I need a fast PCI-Express card that will support 4 SATA-II HDDs. All I seem to find when searching is either cheap cards with 1-3 ports or high end RAID cards. I don't want a RAID card (already have one), but I do want a reliable and good performing SATA card at a price point less than the RAID...
I just burned a CD for Ubuntu Hardy (8.4.1 AMD 64 server) and I plan to install it on my home file server. I'm ready to get started now, but I realized I need advice on how to set the RAID controllers (cache IO or not, writeback or writethru, read ahead or not, stripe size, disk spin down...
I would like to purchase several of these hard drives for use with an Areca RAID controller:
SAMSUNG Spinpoint F1 HD103UJ 1TB 7200 RPM SATA 3.0Gb/s Hard Drive
Has anyone had success with this combo? Areca is reporting that some customers have reported compatibility issues but they haven't...
I just purchased an Areca ARC-1220 raid controller. My chassis is an Intel SC5300 and I have a 4-drive cage (SCSI Hotswap Drive Cage #AXX4SCSIDB).
The drive cage has an I2C connector. The Areca 1220 as an I2C connector. I need a cable to connect the two and an hour of Googling has left me...
I'm building a box, to be used for holding backups, with two older 3ware raid cards and 8 drives. It will be used for backups only. My main file server uses an Areca raid card set up as raid 5.
The backup box has smaller hard drives. I am setting it up as raid 0 so it has enough space. My...
Hi. I have a file server and a Terastation on my GigE LAN and I'm having severe performance problems when I back up from the file server to the Terastation. During the backup, none of the computers on my LAN can connect to the file server.
The last backup took around 12 hours (I think) to...
I posted previously about my 2TB raid system. I purchased enough HDDs to back everything up. Now I just need to figure out the best way to do it. My choices are:
1. build a cheap file server (NAS) out of a spare computer and back up my RAID system to this home made NAS over GigE. For the NAS...
It is often recommended to put the swap partition on a separate drive. Now it is also recommended to run virtual machines on a separate drive from the OS drive.
My question is which would be better for performance if I have three (or 4) drives available:
1. OS on one drive, swap on another...
I have an Areca ARC-1120 (Firmware Version V1.39 2005-12-13) with 8 drives set up as two arrays (raid sets) of 4 drives each. One array uses four WDC WD4000YR-01PLB0 drives in a RAID 5 setup. The second array uses four Maxtor drives. The Maxtor drives have been failing regularly. Initially all...