I just burned a CD for Ubuntu Hardy (8.4.1 AMD 64 server) and I plan to install it on my home file server. I'm ready to get started now, but I realized I need advice on how to set the RAID controllers (cache IO or not, writeback or writethru, read ahead or not, stripe size, disk spin down, etc.).
My hardware is:
Dual Xeon with 6 GB RAM
LSI MegaRAID 320-2E SCSI controller with:
4x Seagate ST373454LC 15k rpm drives.
logical drives:
1. two physical disks as RAID 1 for Ubuntu (boot, root)
2. one physical drive for swap, application scratch, logs, etc.
3. one physical drive for virtual machine (dedicated) or other uses
Areca ARC-1220 SATA PCI-express 8x controller with:
4x Samsung HD103UJ
2x WD740GD Raptors
The raptors are set up as passthrough only. They will be dedicated to virtual machines or other things.
The 4x Samsungs are the main storage. I plan to use RAID 5 with one 2 TB volume and a 1 TB volume.
I would appreciate any advice on how to set up the RAID for this home file server. This is awesome hardware for my situation and I'd like to get the most out of it.
All computers are connected via GigE. All our family data will reside on this file server. This includes music, photos, documents, everything. Most folders in my home partition are mounted folders that reside on this file server. (At the moment, we have a Windows-based file server that will be replaced by this one.) So I need really snappy performance from the network and file server in order not to notice that all my documents are not on my local computer.
BTW, I have an older computer that is used to back up the data from the file server. (Not doing offsite backup.)
I also think it might be good to spin down the drives after inactivity because the file server runs 24 x 7, but when the family is asleep why not save some wear and tear on the disks? Advice on this?
And I'm not an admin - maybe you could call me a power user. I'm will be happy if replies are detailed/elaborate. Otherwise I might not understand.
My hardware is:
Dual Xeon with 6 GB RAM
LSI MegaRAID 320-2E SCSI controller with:
4x Seagate ST373454LC 15k rpm drives.
logical drives:
1. two physical disks as RAID 1 for Ubuntu (boot, root)
2. one physical drive for swap, application scratch, logs, etc.
3. one physical drive for virtual machine (dedicated) or other uses
Areca ARC-1220 SATA PCI-express 8x controller with:
4x Samsung HD103UJ
2x WD740GD Raptors
The raptors are set up as passthrough only. They will be dedicated to virtual machines or other things.
The 4x Samsungs are the main storage. I plan to use RAID 5 with one 2 TB volume and a 1 TB volume.
I would appreciate any advice on how to set up the RAID for this home file server. This is awesome hardware for my situation and I'd like to get the most out of it.
All computers are connected via GigE. All our family data will reside on this file server. This includes music, photos, documents, everything. Most folders in my home partition are mounted folders that reside on this file server. (At the moment, we have a Windows-based file server that will be replaced by this one.) So I need really snappy performance from the network and file server in order not to notice that all my documents are not on my local computer.
BTW, I have an older computer that is used to back up the data from the file server. (Not doing offsite backup.)
I also think it might be good to spin down the drives after inactivity because the file server runs 24 x 7, but when the family is asleep why not save some wear and tear on the disks? Advice on this?
And I'm not an admin - maybe you could call me a power user. I'm will be happy if replies are detailed/elaborate. Otherwise I might not understand.