Hi!
Can anybody help me with my T-6100 ocing.
CPU - A 64 3700+ San Diego E4 1.4 v
The MOBO can do only 247 FSB ( cpu multi - x7, HT - x1, SB<->NB HT speed - x1, BIOS - CU51MB02, memory lock at 133).
By setting the CPU voltage to 1.7v in BIOS (in CPU-Z -.1.616v) the MOBO can do up to 265 FSB
Is this result the problem of the board, or the CPU ?
I tryed with the latest CU51M127 BIOS, but the situation is same.
In both BIOS (CU51MB02 and CU51M127) there is no NB voltage regulanor, how can i set it higher?
Thanks very much for your attention !
Can anybody help me with my T-6100 ocing.
CPU - A 64 3700+ San Diego E4 1.4 v
The MOBO can do only 247 FSB ( cpu multi - x7, HT - x1, SB<->NB HT speed - x1, BIOS - CU51MB02, memory lock at 133).
By setting the CPU voltage to 1.7v in BIOS (in CPU-Z -.1.616v) the MOBO can do up to 265 FSB
Is this result the problem of the board, or the CPU ?
I tryed with the latest CU51M127 BIOS, but the situation is same.
In both BIOS (CU51MB02 and CU51M127) there is no NB voltage regulanor, how can i set it higher?
Thanks very much for your attention !