Search results

. . Just purchased and installed one at home... 10/100 NICS work fine...but my one gig nic is EXTREMELY slow, especially if traffic from other machines is going through the router... I get crawl speeds if I'm lucky... I got into device manager and forced the gig to 10/100 full and it...

system restore?

. . nice job.... I went through 4 semesters of Cisco Academy at the local JC, then foolishly didn't test for CCNA...fraid I forgot most of the stuff and kick myself everytime I read threads like this...

. . At work we have a couple of ASA5520's which I NEED to learn more about (boss does most configuring but I have green light if needed)...I use the ASDM but have a tough time gettin' my head around some of the rules, etc... I see newegg has the Cisco 5505 for about $350 and was wondering...

Thanks for the replies... the Egg said I could return the memory with 15% restock fee...even if opened. So I'll try one 2GB stick...if it posts I'll open the other...

. . Here is the laptop at newegg... http://www.newegg.com/Product/Product.aspx?Item=N82E16834117664&nm_mc=OTC-Froogle&cm_mmc=OTC-Froogle-_-Notebooks-_-Sony+VAIO-_-34117664 On the specs...it sezs it only supports 2GB...check it out.... Does that mean that 1x2GB will work? and...

. . So I purchased a cheap a$$ laptop from BestBuy for 4 bills...a Sony VAIO. Came with Vista and 1GB (2x512s 667mghz)....(headslap)... Couldn't FIND ANYWHERE any technical data regarding the hardware for this laptop on sony's site.... Chated with a silly CSR and she said the machine...

. . Gettin' ready to install my first wireless devices at home..DLink DGL4500 and VAIO Laptop using 11g. Been googling security and from what I can tell (beyond a VPN) WPA2 is the way to go...then WPA and WEP... SSID off and apply MAC filtering...(does this sound bout right for the...

. . What about laser toner...problems there?

I know the printer manufacturers want you to use brand new same-name brand cartridges (ink, toner) but was wondering what everybody's opinion was on this topic... Are the refill kits and re manufactured cartridges as good as new? Does it really matter or are the printer vendors just out to...

. . Thanks for the replies... yest bmango...i looked at that model also and was considering it...seems like a very good price for a non-duplex AIO... My wife will be using it primarily for homeschool...so I have a feeling it'll get plenty of use...thus, I thought I would upgrade to one...

anyone?

Have it narrowed down to these two when the price is right... Brother or HP However, as of right now...the brother IS the right price...not sure it will go lower...the HP should with the next rebate season they have... Anyone have specific feedback on these specific printers or...

Thanks man

. . So right now I have a wired LAN with an old 10/100 DLink 4 port router which has served me well... My new machine has a gig mobo lan and I bought an intel Pro gig destop adaptor for my Dell...since I want to put gig between them...now I need the router piece. My question is which...

. . So from looking at some of the threads here...it appears there are other video drivers besides NVidia's.... I am currently using 169.06 which I believe came with the driver disk...(can't remember and sheesh it was only a few weeks ago when I installed my card). I've a few Battlefield 2...

. . bump.... Not sure I phrased this correctly.... Basically riva won't work till a windows profile loads.... So if you turn on your box, not sign in...my card temp shoots up higher than I want...until I sign in, and the startup riva profile pushes it back down.... Is there a fix...

. . I was getting 73 degrees idle....fan at 29% per ntune. Cranked the fan to 60% and it dropped down 38% per ntune... Everyone said ntune is crap...so I unloaded and am using riva... Riva reports 40-42% at 60%....set up some sweet profiles via this link...

. '. I had a similar question...you might ask eVGA through email directly.... The sticker DOES cover the edge of the fan slightly...I read that some have trimmed it back with an exacto knife... I did not and my card is running 38-42 degrees at 60% fan. Great card btw....

. . Is there a solution to this? When I first boot (into XP) and DO NOT SIGN IN...my video card is noticably hot... After I log in, my card temps are VERY hot and then riva kicks in and cools it back down... IOW, riva won't work till someone signs in....so does the card just sit there with...

. . Thanks man

. . Do you hippies install the Dell Driver disk that came with your 24"s.... Pros or Cons? Figured it was just bloat from Dell and would only add the "name" of the monitor to certain areas like Device Manager... It doesn't do anything for configuration or performance does it?

So I noticed the sliders on the left have exclamations on them...are these numbers ok for my not oc'd evga 8800 GTS G92. Maybe just need to adjust the graph ranges? I think I have it configured fairly well....at 60% fan, the core temp hoovers around 40 c. Thanks for your replies

. . I have the Antec900 and don't like the molex fans...sloppy wiring + I can't control from software.... I'd like to replace the three...my mobo has 3 pin connectors....don't care about fancy LED's. Advice? tyia

. . Just PU'd another D820 for my work.... I couldn't order through my corporate account (different division), so I just checked-out as guest and put in my corporate card...no problems.

. . I use a D820 for work....got it about 2 years ago....it's been a very good lappie.... However I use it primarily in a docking station....

sounds like a good idea....

. . Ok...seems the NTune fan speed was set to auto....29% I switched to manual fan control, jacked it up to 80% and the GPU temp shot down to 37.... However, every time I reboot...NTune reverts back to that auto setting. I've heard NTune sucks puttyballs....and I should use...

. . So I just installed my new G92 GTS 8800....brand new build (Corsair 620HX psu, E6750, 4GB's Crucial 6400, Abit AB9 Quad GT) Installed the disk that came in the box, then dl'd NTune and the temperature is sitting at 73 degrees Celsius... The driver installed is 6.14.11.6906 and it...

. . Sorry for the laugh...hehe. I really didn't know....and it was kinda confusing w/both plugs on my case.

. . My Antec 900 case has top input jacks and a hookup for both types (AC97 HDAudio)... Appears my Abit QUAD GT will also accept either one... Which one is better?

. . ZZF no longer has free shipping....too bad....IMHO, they were the egg's best competition...not anymore.

http://www.newegg.com/Product/Product.aspx?Item=N82E16813127019 I bought this board from newegg a while back....have NEVER installed it...it's never been turned on even. Still in box...(I did cut out UPS to get rebate) Now I want an SLI board.... Not sure what to sell it for as new...

. . sorry guys for being a dickhead...I should have just just my pie-hole.

. . Ok Kyle...I'm in for an XT... Thanks for the replies, support and your general [H] help outs...I'm pretty sure I'll like it...

. . had I KNOWN this was for a HDTV I wouldn't have clicked...thanks for wasting my time.

Thanks for the replies everyone...(MrMike, did you mean 19x12 resolution?) I'm probably going to go with the EVGA G92 GTS....for $329 and Crysis. Althought ZZF has the BFG G90 GTX for $399. I could probably hold out for the 9800's, but I would imagine the price to be over 5 Benjamins...no?

. . So does those pads make a significant difference?

WOW.... damn...just lost 50 bones...

good find