Had 23.5.2. with the 6900XT and its super stable and works great on the 7900XTX but I feel like the speed improvements they made, etc. didn't come till later. Thanks!
Bought from MicroCenter 10/31/2021 for WAYYYY TOO much $$$. Bought the 3 year plan as well which per their website is transferable. ZERO mining never abused always used with a stand to keep it level and safe in the case. Also ran with fans over stock rpms during gaming to keep the card cool...
So it seems I did a FS post almost a year ago to the day of something similar! lol... So anyway bought the 7700X and ran it for a week or two maybe three now. Set PBO enhancement to 90C and not overclocked/abused in any way!! This sat under my Noctua D14 with AS5. Started suddenly encoding, etc...
Whats the trick to make it work!? I installed iCloud on my PC but I don't see them. Saw some info online and matched settings nada.
PS: I just want to make a copy of my iPhone notes locally, etc.
So I have this Nexlink server at one of our clients and its running Windows 2012. We are planning on phasing it out but they of course don't want to drop the money right meow. Anyways one day this week all their software that is accessed from the server was delayed and slow. Went on the server...
Looking to move this "extra" stuff. Buy it before I change my mind and break the seal on one of them for Christmas! :woot: Heat 40-0-0 under Tazman02. Prefer paypal. Can also try to ship tomorrow if something is open as I have the day off and can do it if its sold early enough! May accept PS4 as...
Bought it in July. Specs in sig. Suddenly it just started the other day and noticed in event viewer I have WHEA errors. I'm just using PBO and was using a negative 0.125 offset voltage just fine no issues until now. I notice when I go up ie less negative it starts stabilizing. Should I just try...
Purchased new from Amazon on Sep 21, 2018. Never abused or mined on. Ran at +10 power/+200 on memory for haha's. Ran at idle 90% of its life. Replaced with a 6900xt for who knows what reason so looking to make some money back. Exact model below. Includes box, etc. Might accept partial trade...
So I have a 8TB drive I use Macrium Reflect to backup to this drive via a high speed USB 3.1 connection. Looking for options how to RAID this current setup keeping data intact. The Synology seems like its a reliable and good bang for the buck but will it do what I want?? Obviously this being a...
Was able to get a 5950x but still waiting for a decently priced 6800/6900 XT! :) Never abused ran at idle 90% of the time light gaming here and there. Sat under a Noctua with fans set to turbo with a negative offset for voltage, etc. using only PBO for a OC! Have original box, etc. Purchased on...
Same cooler same PBO settings and voltages as the 3950x. Updated to the latest bios a few days ago knowing I'd get a 5950X hopefully soon and one popped up on AMD Direct for MSRP sooooooo here we are. So she runs on average 200-300 mhz more per core during prime, etc. But idle and load temps are...
Is there a app that will move apps and their settings from a LG phone to another LG phone? Or any brand really?? I've found a few on google but... Anything tried and tested??
Went to a 3950X so this is a working pull with box, etc.
Bought from a local MicroCenter in July of 2019 along with my current mobo.
Heatware below have paypal/amazon. *SOLD*
https://www.heatware.com/u/3975/to
Bought a 3800x the other day and tested with PBO got up to 4.215ish under Prime 95. Anyways figured I would test with the highest "safe" voltage of 1.325v and got the below. Bios confirms 1.325v but yet everything else says this. Notice the wattage. WTF!? Btw using a Asus Hero x470 with latest...
A few weeks old. Never abused and still have the original cooler unused with original box. **SOLD**
Heatware under Tazman02. Prefer paypal but I guess I can try one of those Amazon gift cards that some are doing now.
Is there any good ones left that look like a standard router but still have WIFI without the visible antennas!? I've sat on Amazon and google for awhile and nada that isn't old and has other problems...
So I have a LG V35 which is water resistant as far as I know. I had it on the motorcycle during some light rain figuring ehh it'll be fine and as expected it eventually had the water detected error for a few hours then it went away. I thought nothing of it and made sure to let the cord and USB...
Already bought a 1080 TI on Amazon and have this available now. Mined on for about 20 minutes one day about a year ago. Original owner bought it in 2016 from Newegg and only overclocked the memory +400 in Afterburner never tried higher. Otherwise the card clocked at 2016-2025ish MHZ on the core...
So here is a good one. Used Samsung Magician to go to a EVO 860 drive and my signal went down to 66% from 92%. Thinking I'm losing it I switch the boot up drives back and sure enough back to 92% on the HDD. Found a post with google about if its near the card blah blah it can cause issues. Thing...
I have a EVO 860 500GB that I wanted to use as a boot drive and when I bench it under CrystalDiskmark it freezes on almost every step as if the computer hits 100% usage cycle on the bus!? Anyone else notice this? I don't want to have this issue once I use the drive.
Looking to snag one of the new 860 EVOs to finally upgrade to Windows 10, etc. Should I stick to the cheaper typical Sata or go M.2? I guess my Z270 supports M.2 pretty well and even may have seperate lanes for it? Let me know your 2 cents! :)
Still have the below for sale!
Heatware here --> https://www.heatware.com/u/3975/to
Bought in July 2017 and used for a short bit in my last build NEVER abused voltage wise, etc. ran below 2400 due to limitations on Sandy Bridge!
G.Skill 16GB (2 x 8GB) DDR3 PC3-19200 2400MHz TridentX Series...
Just upgraded to a 6700k/Z270 so looking to sell these! Prefer Paypal can usually ship within a day or two business days. I'm guessing at prices so don't feel like you can't give me a best offer! Thanks for looking! ALL shipped USPS priority!
Heatware here --> https://www.heatware.com/u/3975/to...
So I put this together yesterday. Had some wicked laggy mouse issues (USB driver) and lower frames then my 2700k it replaced initially which required all the power state junk to be disabled to behave as expected. Anyways I have this horrible kind of pulsating on and off what sounds like coil...
Silly idea but I'm sure some of you have done it. I of course got the "mouse lag and lower fps" issue when running dual monitors on my current setup even if I had twitch, etc. running on another monitor nothing intensive except the game itself that is fine the moment I pull the HDMI cord out of...
I know I know its not highend never was but... Now that I use them more often cause of where I live looking for something better that doesn't sound like a AM radio even with tweaks and maybe louder!? Thanks! :)
EDIT: And maybe something with bluetooth as well so I can use the cell while gaming...
Specs in my sig. Will there be a driver issue!? Was looking to finally make the plunge on a SSD and dual boot for a bit and noticed some google posts about hardware/driver issues with Sandy Bridge!? If so whats the lowest I can go for specs? Or should I just upgrade soon? LOL :)
1) Selling a Whistler CR90 High Performance Laser Radar Detector. Bought in March 2016 and upgraded to a higher end (more spensive!) unit.
Includes original window mount, USB update cable, box, user manual and original 12 volt adapter.
Also includes 3rd party suction cup mount.
$80 or best...
Bought a year ago and just upgraded to 2400 mhz ram only to find out Sandy's won't do it on my board unless I OC or go to a 3770k, etc. Not going to waste time returning the new ram so here are the ones I pulled. Don't know where the original packaging is since I moved in case it matters...
Have a older Cyberpower 1000AVR I got for cheap a few years ago. Worked fine all these years always hit the power switch before leaving the house when possible thunder, etc. can occur. Got home today and went straight into "overload". Unplugged everything still the same error. Hit the Reset in...