Search results

General: Perfect (though limited) Heat, perfect eBay, perfect Paypal, bunches of forum/personal/business refs available upon request. I guarantee shipment same or next business day payment is received via insured UPS ground. I accept paypal, checks, cash in person, etc. but checks need to...

General Stuff: All prices are OR BEST OFFER, but I think they're pretty fair based on completed ebay and other forum traffic. Don't lowball but make offers. I'll take paypal, money order or check (but I'm not shipping until it clears), or cash in person..which I recommend if possible. Most...

Couple cheap things I need: - OBTAINED 2 pairs, Intel Xeon S603/604 (400/533 FSB) heatsink retention brackets (the plastic end brackets that clip through the holes in the board that the heatsink in turn mounts to). Also 2 pairs of the metal spring clips that attach the sinks to them...

So I run IT for GES Exposition (who puts on Macworld and just about every other show in the city)...and since I finished up early today I figured I'd snap some pics. I couldn't get anything of the apple compound...damn thing was covered in so many drapes and security everywhere :( Not...

So I have a pair of Thermalright SI-9XV heatsinks (the sideways 92mm heatpipe variety) for my Xeons..I got them because the Supermicro's I run are hard-pressed to keep my new 3.2 Gallatins cool without a stupid amount of air over them. Heatsinks shown here...

What it says. Need one ASAP, ideally SF Bay local, but anywhere. :)

Does anyone have experience using an Iomega Rev with BE 10 on Sever 2003? The guy I'm supporting is seeing hard locks during backups but they are intermittent. The rev is set up as a removable backup-to-disk folder and when it doesn't lock up, it works fine. Symantec (Veritas) support...

So I spent some more time working on my deskside workstation/rendergarden rack. Got a lot more done than I figured I would so I figured I'd whore up some in-progress pics. Got a total of 5 of these SGI cases now (sold 4 to a friend, I had 9). I still need rails for the other 2 in the...

The business part: All items are OBO, so make offers. Don't lowball though unless it's in a PM. Perfect (if minimal) heat under 18-psi at attbi.com (at comcast.net), perfect ebay under 18-psi, personal refs available from [M], [H], 2CPU, OT, Head-Fi and others. Payment can be paypal, cash in...

Showing here: http://www.argosyconsole.com/d15.htm The 2nd configuration shown is what I'm using at the moment in a bay at school and love it to death. It's pricey but it'd handle all my gear and then some...and the integrated racks would be outstanding for a mixer, DV decks, patch panels...

I'm sure some of you remember the drama from when it happened. More BS recently so I'm through with the assholes. I know I'm not the only one they've fucked over with their mismanagement, lies and other crap. Enjoy my new site: www.derickshaw.com up until my transfer goes though.

Repost from a couple other forums, but I figured you [H] mac guys would enjoy it too. So.... 256MB was better than I expected..but it needs more for the FCP stuff I'm doing so I figured I'd pop it open and have a peak inside. I wasn't sure if standard issue PC DDR would work, so I...

I need to grab an apple of some sort for an FCP gig I have coming up and I'm thinking I might as well consolidate with my need for a laptop of some sort. I've got about $700 to spend...less is good, maybe a little more if its better...looking for at least 500-550mhz, would pay more for a faster...

Got an Audiophile 2496 under 2003, configured as workstation. Love the OS...so much faster disk access than XP Pro (especially the SCSIs). Anyway..only one piece of hardware drama to sort out, and its a big one. My M-Audio drivers work (officially not supported..need to run the installer in...

So I'm working on setting up 2003 Standard as a workstation (on my duallie) again now that I'm done with school and have a bit of time. I don't run a floppy...and generally don't have one around so last night I decided to install it and set it up with my system and scratch disks (a pair of...

Anybody? Working on putting together a couple duallie 1U boxen for the fleet. 1000's are best but any P3 will work if the price is right. The risers are pretty generic and I need 4 of them as well. email to [email protected] :p

Assholes didn't re-up for my domain name (despite having a valid CC on file) so I can't get at my site or email..but I can't re-register it somewhere else cause it's taken apparently. 1&1 has now stopped support for the free promo play I guess, and I can't log in because my domain has expired, I...

I've got an older laptop that I'd like a USB connection on. Can't use a cardbus card, so USB 2 is out of the question. Does anyone have one of these or know of one for sale anywhere? I've been unable to find one anywhere, which seems odd to me. If the laptop had cardbus ability, it seems it...

Policies/General Info: Prices are negotiable..but don't lowball unless its via PM. Items are priced professionally packed and shiped insured UPS ground, except where noted. Paypal is preferable, money order or cashiers check is ok, cash is ok in person (SF Bay area). Heat is under 18-psi AT...

Model 6646 Q1U, P3 866, 512MB Tested good RAM, 80GB WD SE. Whether I use the included 10/100 PCI NIC or a USB WiFi Adapter, network activity causes a hardlock both in Windows XP and 2K Pro. Any ideas WTF is causing this?

I have a pair of 2.2/400's that are S604 (at least, I think they are). A guy looking to buy them wants 603 only (and inquired the following)....are these, if 604 (I have to look again), compatible with a pin chop? I thought that extra pin was for 533 bus originally but its obviously not.

Has anyone been able to get palmsync.xpi to work with Thunderbird? I like Tbird but i'm gonna have to move back to outlook again if I can't get the damn thing working with my palm. I need to sync contacts (with palmsync.xpi does) and my datebook (which I haven't yet found an extension to do)...

I need a cage for my rackmount case that will hold 5 low-profile disks in the space of 3 5.25 bays. I've seen em before but can't remember where. No swaping or anything needed...just a hunk of metal with the appropriate holes and/or standoffs. Otherwise I've gotta get out the tools and make one

What it says. If you've got one, I want it. Also interested in another UltraPlex 40Max for the fleet.

Looking for a G3 Tower, Ideally Blue & White but a Beige could work. Needs to be able to run OSX, even if not officially. I need a machine that will run OSX and basic design/content creation apps, if slowly, for compatibility purposes. PearPC isn't cutting it for me. (Got a well loaded...

Got my 'new' 9800 Pro 128MB tonight (swapped it for my 9500 pro and some other stuff with a friend). I decided I was tired of messing around with modified drivers and figured since I'd done harder mods plenty of times I'd get on with it... so... 1) I popped off the heatsink, removed the...

Well my mom seems to love my Palm T2 (as do I) and my dad has said that if I want, he'll give me the $250 I paid for it towards something else and give it to her for their aniversary....and while I don't strictly need anything more.... I was looking at the X30...seems like a powerhouse and I...

What it says. Looking for a bit more punch out of my system/scratch/capture disks on my workstation and since I've got 2, and a robust backup solution already in place, I figure I might as well stripe 'em. I'm basically looking for the best, either new or used, option for max performance...

*PENDING* X15: Solid 3+ years remaining on warranty, U160 SCSI, 68 pin. Asking $75 shipped. 29160N: 1 U160 channel, 32bit pci, has external 50 pin high density SE connector for scanners and such...why I had it vs. the 29160. Asking $50 shipped. Prices are negotiable for quick...

:D

I need to install some DV capture drivers for a video camera but they won't install in 2K3 server due to OS 'incompatiblity'. I know there's a way to circumvent this...how? :D

Looking for a simple 3-bay 5.25" cage that holds 5 3.5" LP Hard drives. I'd prefer it to be local pickup/trade as I really need to get these drives mounted and up but if you have one, let me know. In addition (not instead of), I'm looking for a same sized (3 5" -> 5 3.5") SCA SCSI cage, that...

Need a 4 or 5 drive SCA scsi cage. I prefer Sun SPUD's since they match my case rather nicely but anything will do. I need to use U160 drives in it but most U2W cages will work @ U160 in my experience.

Got 2003 Web up and running on the box in the sig...but much to my dismay the OS appears to not support the chipset despite claims to the contrary...and lack of any installation tool to fix the problem. Problems include lack of response when doing anything with my ATA disks, super-slow ATA...

Got write caching turned on (though for some reason, this made the drive disappear from everything, save for device manager, until after i rebooted). No improvement enabling it. OS is 2K3 Web Server, otherwise specs are in the sig. Anyone got any ideas?

I've got a pair of these which have served me very well for a little under a year (I got them NIB at the time). They have all accessories, original packaging etc. and are in like new condition. The rig in the sig, with a sony F500 21" crt, a stereo and a few other odds and ends runs for a full...

I found a good deal on an ethernet bridge for 24dbi grid (802.11b) antenna (as opposed to the orinoco and PCI adapter solution)...this is a better solution for integration and ease of setup but how can I connect to multiple networks? I assume there's no way to use netstumbler or similar...

What it says...got a SCA cage on the way and want to use it :) Got one with an adapter for your 68 pin cable? Trade Me! SF Bay local is best so I can have the system down for as little as possible but anything will work...let me know! Will also trade + cash for a larger size or a 15K.3...

Need to move these out as I have no need for them anymore: Asking $20 shipped for each SLK800-A and $40 shipped for an adaptec 29160n PCI card (no cables). The SLK's come in original boxes, with a good amount of thermal compound left and all clips. eBay refs under **PathogeN**, heat...

I'm looking to connect roughly 2 miles with a rough 5-degree coverage angle. I've decided that this http://www.hyperlinktech.com/web/hg2424g.php antenna is probably the best (that I've seen for a reasonable price). What is the best card/adapter for PCI application in a desktop? Orinico...