The Conroe Overclock Database. (Please read 1st post for posting instructions.)

Status
Not open for further replies.
Everything remains the same from my previous setup except the OCZ memory is now at 5-4-4-12 with the increase to the 7x505 settings and upgraded to the 0614 bios. Still on air, no reason to be a wuss and use water. :D

e63007x505adt6.png
 
I overclocked at E6300 with a Gigabyte DS3 to 2.8GHz. 12 hours dual prime stable. I have Patriot DDR2 667 ram, but I am running it at 800MHz, so I'm pretty happy about the whole thing. I didn't take screenshots of the 2.8GHz dual prime stable reading, but I'm not lieing. I just wanted to contribute to the thread. I will try for higher once I understand what the bios settings mean.

Lyquist

P.S. All voltages are default. All I did was raise the fsb to 400 and it worked no problem.
 
AeriaGloris
4 hours Orthos

Name : E6400
O/C : 3008MHz
Stepping : 6 B2
Week : L627
Code : A863
Vcore : 1.325v (stock)

Cooling : Air
Cooling : Arctic Cooling Freezer 7 Pro

Mobo : GA-965P-DS3
Bios : F5
RAM make : Gskill
Rates Speed : 6400
Actual Speed : 752
Timings : 4-4-4-12

 
My temporary results. Before the pc-8888, tunique tower and hr-05 arrive.

sol.fides
7hrs Orthos

E6600
OC: 3217Mhz
Stepping: 6 B2
Week: L628
Code: A248
Vcore: 1.35

Cooling: Air
Cooler brand/model: Intel stock

Motherboard: P5W DH DLX
Bios Version: 1305

RAM brand: Mushkin
RAM rated speed: 5300
RAM actual speed: 716Mhz
Latency: 5-6-6-18

cpuz
http://valid.x86-secret.com/show_oc?id=121688



A P5W DH FAQ out of Germany. Good information.
translated
untranslated
 
User Name: Closet Gamer (I'm new, hi everyone)
Stability: 11 hours of dual prime95

CPU name: E6600)
OC: 3,645MHz
Stepping: 6 B2
Week: L627
Code: (will have to look this up on my retail box. I don't remember)
Vcore: 1.475

Cooling: APOGEE
Cooler brand/model: Swiftech

Motherboard: Asus P5W DH
Bios Version: 1042

RAM brand: OCZ
RAM rated speed: 6400
RAM actual speed: 810MHz
Latency: 5-6-6-18



I don't actually know where to send my stability proof to? Can someone PM me and let me know? I'm pretty new here.
 
LMAO! Best Nick ever!! For image hosting, try photobucket or imageshack. And welcome. :)
 
User Name: Adrift02
Stability: 6+ hours Orthos
CPU name: E6600
OC: 3001MHz
Stepping: 6B2
Week: L624
Code: A824
Vcore: 1.425
Cooling: Air
Cooler brand/model: Si-120
Motherboard: Asus P5W DH Deluxe
Bios Version: 1305

RAM brand: Gskills 2GBHZ
RAM rated speed: ddr2-800
RAM actual speed: ddr2-1000
Latency: 4-4-4-12

P.S. How do u get pics to display with ur post? I will edit when I figgure out how bc I have a screenshot of the 6+ prime.
 
Here's my entry:

CPU-Z Validation Link:
http://valid.x86-secret.com/show_oc?id=122082

Screen Shot Of Orthos:
http://img180.imageshack.us/img180/1986/4hrsorthosit5.jpg


My Info:
User Name: Rogue
Stability: 4 Hours 32 min 39 sec Orthos
CPU name: Conroe E6600
OC: 3310MHz (367x9)
Stepping: 6 B2
Week: L627
Code: A682
Vcore: 1.213v
Cooling: Air
Cooler: Zalman CNPS9500
MoBo: Infinity 975x
Bios: 731
RAM brand: Corsair XMS-2 5400
RAM rated speed: 5400 675MHz
RAM actual: speed: 735MHz
Latency: 5-5-5-15

Thanks :p
 
New CPU
I replaced my CPU with a week 28 part, and it runs at significantly lower voltage and slightly higher speeds than my old week 24 part. This configuration is silent: all fans <=600 RPM.


User name: cmthomson
Stability: 13+ hours Orthos

E6600
OC: 3333 MHz (9x370)
Stepping: 6 B2
Week: L628
Code: A269
Vcore: 1.4875 (BIOS)

Cooling: air (silent; all fans <= 600 RPM)
Cooler brand/model: Scythe Ninja

Motherboard: ASUS P5W DH Deluxe
BIOS version: 1402

RAM brand: G.Skill 2GBHZ
RAM rated speed: 6400
RAM actual speed: 740
Latency: 3-3-3-12-5 tRD=6


This system can go faster at higher CPU and MCH voltage, but this is as high as I wanted to go so I could keep it silent.
I'm using four Nexus Real Silent 120mm fans, all undervolted to very low speeds, in an Antec P180 case. You can't hear the fans more than 8 inches away from the box.

NOTE: To get these speeds, I had to increase the tRD parameter with memset. The BIOS sets it to 5. At tRD=5, the system stopped being stable at FSB 361.

As always with P5W DH, I disabled C1E, SpeedStep and Hyper Path 3. I stuck with 1:1 RAM speed to keep latency low.
The CPU temperature reported by Probe 2 and SpeedFan is bogus, you need Core Temp, RMClock, TAT or Everest to get the on-chip temperature. The motherboard temperature is the south bridge.

The stock NB HS was replaced by a Thermalright HR-05.

ss370740zy7.jpg
 
http://valid.x86-secret.com/show_oc?id=122137
ser Name : rogard
Stability : 4+ hours

CPU name : E6700
OC : 4014
Stepping : 6 B2
Week : L626
Code : A537
Vcore : 1.50 (Bios)

Cooling : Phase
Cooler brand : Vapochill XEII

Motherboard : Asus P5WPro
Bios Version : 0116

RAM brand : Corsair TwinX
RAM rated speed : 8500
RAM actual speed: 400
Latency : 5-5-5-18 stable (currently on 5-5-5-15 not tested)

CPUZ ID : 122137

overclock.jpg




Like the music? :cool:
 
Well, after reading this thread and using it as a guide for hardware purchasing, here's what I got.

User Name : Whiskey29
Stability : 10hrs SP2004

CPU name : E6300
OC : 3304
Stepping : 6 B2
Week : L626
Code : A537
Vcore : 1.35625

Cooling : Air
Cooler brand : Big Typhoon

Motherboard : Gigabyte GA-965P-DS3
Bios Version : F4E

RAM brand : Corsair TwinX
RAM rated speed : 6400
RAM actual speed: 944
Latency : 5-5-5-18 stable (currently on 5-5-5-15 not tested)

CPUZ ID : 122170

Too bad RAM is holding me back it won't go pass 480, it will boot at 475 but 3.3Ghz is enough for now. Although I'll try other TwinX sticks.

Max Temp Full Load according to CoreTemp is 62, Avg 59, Idle 52-54
Room Temp is between 24-25
BIOS setting, I disabled as many options as I could, and set

Mem Mhz : 440
PCIe : 100 (just in case to prevent the mb increase it automatically)
CIA2 disabled
Mem Multiplier : 2
Dimm : +0.2
PCIe : normal
FSB : +0.2
MCH : +0.2
CPU : 1.35625

I found out that most of the time when I crank the bus speed, CPU volt is the last thing I increase, Mch and FSB is first, if it not stable then dimm volt or CPU volt depending on the test on SP2004. If I run small FFT failed then it's CPU volt and large FFT failed for mem volt.

By the way, Mentok, is that word mentok comes from a language in SE Asia ?

Cheers ;)

 
I am really busy this weekend preparing for my Sept 30th move.
IF I do not update tomorrow, I will on Monday.
 
Stability: 7+ hours Orthos

CPU: e6400
OC: 3211 Mhz (7x multi)
Stepping: 6 B2 retail
Week: L626
Code: A323
Vcore: 1.3875 bios (1.312 in cpu-z)
~41c idle

Cooling: TT Big Typhoon w/ Silverstone fan
Antec P180

Motherboard: ASUS P5B (Vanilla)
Bios Version: 0509

RAM brand: G.Skill HZ
RAM rated speed: pc2-6400 (400Mhz)
RAM actual speed: 459Mhz
Latency: 5-5-5-12-5


http://www.strongmcbighuge.com/stable.png
 
Stability: 4+ hours Orthos

CPU: e6600 retail
OC: 3690 Mhz (9x multi)
Stepping: 6 B2 retail L624A763
Week: L624
Code: A763
Vcore: 1.525 V BIOS ~ 32c idle

Cooling: watercooling OASE/ Alphacool Nexxos XP/

Motherboard: ASUS P5W DH DL /rev 1 .-1.65MCH V /
Bios Version: 1305

RAM brand: Corsair XMS 2
RAM rated speed: pc2-6400 (400Mhz)
RAM actual speed: 410Mhz
Latency: 5-5-5-12-5

 
wow, your coretemp says over 70c... intel says the chip should only go up to 60c. how are you not concerned?
 
I got lots of stuff done over the weekend.
Replies! Replies for everyone!

adrift02 said:
P.S. How do u get pics to display with ur post? I will edit when I figgure out how bc I have a screenshot of the 6+ prime.
Click to expand...

Surround the url of the image with
.

whiskey29 said:
By the way, Mentok, is that word mentok comes from a language in SE Asia ?
Click to expand...

That may be true, but I named myself for the Mind Taking judge from the Adult Swim cartoon
Harvey Birdman Attorney At Law.

And famich I noticed that you have Skype on your desktop. I just started using Skype
myself. Would like to be my first Skype buddy?
 
Most welcome, Mentok, I accept willingly ;)
I am from the Czech Republic , Europe . GMT +1 hour, so I do hope we ll stand the chance to communicate :D

I am expecting the new rev of P5W with 1.85MCH V and I hope that 6600 s gonna reach 3800 ;)
 
anyone know if this chipset cooler will work on the ds3 with a tt big typhoon or will i have clearance issues.... or will the non sli work please respond i wanna order today
my.php
 
Well, this is my final o/c for this E6600. I'm going to try chip #2 now.
Can you update my listing submitted already with this max speed data.
Please note that the cooler I use is by a company called CoolIT, not 'CoolTechnica' as was mistakenly entered in the database.

CPU name : E6600
OC: 3476MHz
Stepping: 6 B2
Week: L626
Code: A175
Vcore: 1.55V
Cooling: Water
Cooler brand/model: CoolIt Freezone
Motherboard: Asus P5W DH Deluxe
Bios Version: 1305

RAM brand: G.Skill
RAM rated speed: 800
RAM actual speed: 772MHz
Latency: 4-4-4-12


 
THX , Mentok, for updating the database !!!! :D
You ve had a lot of work with it for sure !
Kudos to you.

PS PM with my Skype info follows.
;)
 
Mentok -

You can remove the 1st of the two listings you have for me on the E6600 @ 3450... it's the same chip as the one listed right above doing a (final) 3476 mhz.

Thanks man! GREAT job on the DATA COLLECTION. This really helps us old school O/Cer's separate the BS from the real deal.

I haven't been this excited about overclocking since my Pentium 233MMX hit 292 mhz.
Socket 7 rulez !
Quake timedemo forever ! :D

Johnny Mo
 
Please update my entry with this one, thanks!

oozish
Stability: 4hours+ ORTHOS

CPU name E6400
OC: 3220 MHz
Stepping: 6 B2
Week: L623
Code: A323
Vcore: 1.375

Cooling: Air
Cooler brand/model: (Thermaltake Big Typhoon)

Motherboard: P5b-deluxe wi-fi
Bios Version: 614

RAM brand: Gskill
RAM rated speed: 6400)
RAM actual speed: 920
Latency: 4-4-4-12

 
oops, just double checked and my voltage is actually 1.3500; memory voltage 2.15 (nice memory!).
 
oozish said:
oops, just double checked and my voltage is actually 1.3500; memory voltage 2.15 (nice memory!).
Click to expand...

Your HZ DDR2 will run @ 4, 4, 3, 7 with only 2.10Vdimm at those MHz :cool:
 
Here's my entry for E6300

CPU-Z Validation Link:
http://valid.x86-secret.com/show_oc?id=123616

Screen Shot Of Orthos:
http://img73.imageshack.us/img73/4499/2300xk8.jpg

My Info:
User Name: Rogue
Stability: 4 Hours 36 min 37 sec Orthos
CPU name: Conroe E6300
OC: 2815MHz (401x7)
Stepping: 6 B2
Week: L628
Code: A157
Vcore: 1.440v
Cooling: Air
Cooler: Arctic Freezer Pro 64 Modified
MoBo: Infinity 975x
Bios: 731
RAM brand: Corsair XMS-2 5400
RAM rated speed: 5400 675MHz
RAM actual: speed: 804MHz
Latency: 5-5-6-15

Thanks :p
 
alpha0ne said:
Your HZ DDR2 will run @ 4, 4, 3, 7 with only 2.10Vdimm at those MHz :cool:
Click to expand...

I get an error(s) running at that timing(s). My memory is weird it's good to about 960fsb at 4-4-4-12 but finicky about anything else, even with higher voltage. Up to that speed, however, I can run it fine at 2.1. After that even higher voltage (I've tried up to 2.4) doesn't seem to matter.

I start getting more errors before 100%...looks no go to me.

Any suggestions? (this is at 7x450 @ 2.1v)
 
CPU name: E6300
OC: 3556MHz
Stepping: 6 B2
Week: L625
Code: A705
Vcore: 1.5

Cooling: Water
Cooler brand/model: Corsair Nautilus 500

Motherboard: Gigabyte GA-965P-DS3
Bios Version: F6

RAM brand: Crucial Ballistix
RAM rated speed: 6400
RAM actual speed: 1016
Latency: 5-5-5-15

3556mhz.jpg
 
oozish said:
I get an error(s) running at that timing(s). My memory is weird it's good to about 960fsb at 4-4-4-12 but finicky about anything else, even with higher voltage. Up to that speed, however, I can run it fine at 2.1. After that even higher voltage (I've tried up to 2.4) doesn't seem to matter.

I start getting more errors before 100%...looks no go to me.

Any suggestions? (this is at 7x450 @ 2.1v)
Click to expand...

Make sure you have active cooling on your ran and up Vdimm to 2.2V
 
Status
Not open for further replies.
Back
Top