The Conroe Overclock Database. (Please read 1st post for posting instructions.)

Status
Not open for further replies.
My Info:
User Name: famich
Stability: 1H
CPU name: Conroe E6600
OC: 3750 MHz /416*9/
Stepping: 6 B2
Week: L624
Code: A823
Vcore: 1.6V
Cooling: WC
Cooler: Alphacool Nexxos
MoBo: ASUS P5W DH DL rev 2/1.85V MCH /
Bios:1305
RAM brand: TeamGroup Xtreem 6400
RAM Latency: 4-4--10

 
I just picked up my Core 2 Duo E6300 today.

FPO/Batch# L627A823

Pack date: 08/17/06.

Damned thing is barely a month old.

I have to install it and test it, but that's going to take place either tomorrow or Monday.

The ram I'll be using for this is OCZ PC2-7200 Which is rated at 4-4-4-15. It's EPP capable, but I won't be using it on an nVidia chipset based board.
 
Just got this board and its the P5W64-WS , anyway just started to overclock an hour back and this is what I have for now.

You will have to give me a few days to finalize everything. :)



I am going higher but tomorrow or day after , wee bit busy
 
I am sorry guys. This is the last weekend before I move. I hope to update for you tomorrow.
 
Ran Prime all night and its stable at 3.33ghz , hopefully get another 300 mhz tomorrow
:)
 
This motherboard (Abit AB9) has been having a lot of RAM compatibility problems. The latest BIOS seems to have mostly fixed them and I can now get a decent OC. I could probably go a lot higher if I was more willing to push VCore.


Model E6600
OC: 3006MHz
Stepping 6 B2
Week L625
Code A209
Vcore 1.35V

Cooling Method: Air
Cooling Model: Zalman CNPS9500LED

Motherboard: Abit AB9
BIOS Version: 1.4

RAM Brand: Patriot
RAM Rated Speed: 5300
RAM Actual Speed: 667
Latency: 4-4-4-12

CPU-Z Validation

 
sifulee said:
CPU name: E6300
OC: 3556MHz
Vcore: 1.5

Cooling: Water
Cooler brand/model: Corsair Nautilus 500
Click to expand...

Would you mind providing ambient, case, airflow, and temps from speedfan/eztune? Thanks and nice OC!!
 


Primed for 14hrs and works flawlessly , will run this or something similar to this on 24/7 in the end
 


3516mhz , stable at two 32meg pi and now running prime for four hours , see how that goes.
 
sifulee said:
I broke the record thanks to F6

CPU name: E6300
OC: 3556MHz
Stepping: 6 B2
Week: L625
Code: A705
Vcore: 1.5

Cooling: Water
Cooler brand/model: Corsair Nautilus 500

Motherboard: Gigabyte GA-965P-DS3
Bios Version: F6

RAM brand: Crucial Ballistix
RAM rated speed: 6400
RAM actual speed: 1016
Latency: 5-5-5-15
Click to expand...

Not this record..... :D

Overclock- 3589MHz
Stepping: 6 B2
Week: L625
Code: A705
Vcore: 1.475

Cooling: Air
Cooler brand/model: Tuniq Tower 120

Motherboard: Asus P5B-E
Bios Version: 0402

RAM brand: OCZ
RAM rated speed: 7200
RAM actual speed: 1025
Latency: 4-4-4-12

1. Still on Air, really, who needs water with these chips?
2. New Board, new memory, new timings.
3. A 7950GX2 is also installed.
 
Hi mentok1982 and everyone else,

I am going for the Low Voltage High Clock level for my system. Unlike what some AMD motherboards do for Cool and Quiet,
Asus's P5W DH does not add increased voltage to SpeedStep. I want a fast system when needed, yet an ice cool box and room when idle.
Currently, SpeedStep runs my CPU at 2100 Mhz at 1.14 volts (22 C cpu, 52 C sys), but cranked up at 100% CPU,
I get 3150 Mhz at 1.28 volts stable (42 C cpu, 53 C sys). Here are my results:

User Name: RemingtonSteele
Stability: 6 hours 48 minutes using Prime95

CPU name: E6600
OC: 3153.9 Mhz (350.43 Mhz FSB * 9 multiplier)
Stepping: 6 B2
Week: L627
Code: A794
Vcore: 1.28

Cooling: Air
Cooler brand/model: Zalman CNPS9500 LED

Motherboard: Asus P5W DH Deluxe
Bios Version: 1305

RAM brand: G.Skill
RAM rated speed: PC2-6400 (400Mhz)
RAM actual speed: PC2-7010 (438.1 Mhz) 876
Latency: 5-5-5-15

CpuZ proof:

http://valid.x86-secret.com/show_oc.php?id=124345

Pic proofs:

 
Alright, time to post.

Username: MrMitch
CPU: Core 2 Duo E6300
OverClock: 3.326 GHZ
Stepping: 6 B2
Week: L625
Code: A705

Cooling: Air
Zalman CPNS9500 LED

Mobo: ASUS P5B-Deluxe WiFi

Ram:
Crucial Ballistix 2 x 1GIG
Rated DDR2 6400
Ran @ DDR950

CPU-Z Validated.

http://valid.x86-secret.com/show_oc.php?id=124390

untitled.JPG
 
67shelby said:
Not this record..... :D

Overclock- 3589MHz
Stepping: 6 B2
Week: L625
Code: A705
Vcore: 1.475

Cooling: Air
Cooler brand/model: Tuniq Tower 120

Motherboard: Asus P5B-E
Bios Version: 0402

RAM brand: OCZ
RAM rated speed: 7200
RAM actual speed: 1025
Latency: 4-4-4-12

1. Still on Air, really, who needs water with these chips?
2. New Board, new memory, new timings.
3. A 7950GX2 is also installed.
Click to expand...

For now! :rolleyes:
I'm at 3620 priming right now 45 mins so far at 1.5v :D
 


Check the temps out , its looking good though and I noticed that I had to up the Vcore a lot to get it to this.

In the end I will run it at 3.5ghz ddr980 or something near that.
 
67shelby said:
I hope you get it above 3625. ;)
Click to expand...

Lol, I don't think I can beat that. I've ran into the fsb wall now. Btw my 3620 failed prime.
I have a quick question... when your oc fails are you able to go back to the previous speed you was stable with? I can't and I have to reset cmos and start all over. My mobo is very sensitive and I have to oc it very slowly after 500fsb. Also what are you temps like. On water mine is 28-30c idle and 40-53c load using speed fan.

Well best of luck with your oc.
 
@sifulee ,check my temps out.

I have primed the one I am doing now for 1 hour and its stable , its at 3603.89mhz.

I pray it passes four hours cos thats what you need to prove its stable
 
nooh said:
@sifulee ,check my temps out.

I have primed the one I am doing now for 1 hour and its stable , its at 3603.89mhz.

I pray it passes four hours cos thats what you need to prove its stable
Click to expand...

Those are some pretty high temps however core temp is like 12c higher then temps reported by speed fan.
My core temp go up to 60-62c while priming @3556mhz on water!
 
Holy crap those are high temps! :eek: And I was wimping out on the voltage because I was hitting 50C @ load in Coretemp :p
 
sifulee said:
Lol, I don't think I can beat that. I've ran into the fsb wall now. Btw my 3620 failed prime.
I have a quick question... when your oc fails are you able to go back to the previous speed you was stable with? I can't and I have to reset cmos and start all over. My mobo is very sensitive and I have to oc it very slowly after 500fsb. Also what are you temps like. On water mine is 28-30c idle and 40-53c load using speed fan.

Well best of luck with your oc.
Click to expand...

If I take the board to far, yes, it requires a CMOS clear to get back to the original high overclock. I start around 450FSB and increase by 5 to 10FSB up to my max level. I am usually around 29C at idle, end up around 56~58C under full load after four hours with the Tuniq.
 
I'm gonna kill Bill.

KEY:
Green=official result (all columns filled)
Black and bold=not official result
conroe1lg0.png


Highest overclocks that have not been proven to be stable:
notstablelw1.png
 
Trying 3.62ghz now, and have put a fan on the ram and another one near the HSF , it bought the temp down by 1c :D
 
Wow, that is one informative f***ing table :eek:. Nice work mentok, good luck moving :cool:.
 
all the cpuz info



:) I think I did good , looking at the family and week cpu I have

PS don't kill bill cos thats the only friend I have.
 
Can this count ?

I am worried after checking the temps, I couldn't even put the core temp program on , it kept on adviseing me to shut my pc down but that said it is only a couple of degrees over it so I wanted to see if it was stable.

Ran two 32meg pis and its stable , but running prime scares me. if it goes to 95c I am shutting PC down.

Also the HSF is not that hot either , its kinda weird and hoping the temp thing isn't working.
 

:eek: check temps , onload


Idle

Thats it ,done it , yipeeeeeeeeeeeeeeeeeeee!!!!!!!!!!!!!!! :)

Cpu :E6600
OC :3780mhz
Stepping :B2
Week :L623
Code :A790
Vcore :1.4725V
Cooling :Air
Model :Scythe Infinity
Motherboard :p5W64-WS Quartet
Bios :0119
Ram Brand :Supertalant DDR800
Ram Speed :pC6400
latencies :4 3 4 10

Mentok you can submit this to the leaderboard :)
 
I slowly try to find the limit of my system. So here is another update:
Temp reaches 63-64 C with coretemp. Ambient temp = 21 C. I intend to revert to 3200 MHz for 24/7 use.

User Name: Blurp
Stability: > 10 hrs Orthos Large fft's and >8 hrs small fft's
CPU name : E6400
OC: 3336 MHz
Stepping: 6 B2
Week: L626
Code: A228
Vcore: 1.4125
Cooling: air
Cooler brand/model: Zalman 9500
Motherboard: Gigabyte GA-965P-DS3
Bios Version: F6
RAM brand: Mushkin
RAM rated speed: 6400
RAM actual speed: 834
Latency: 5-5-5-12 2.0v
my.php
 
Im up to 2.96Ghz now and around 1.8V. Ever now and then when booting up I lower the voltage by a notch and give an extra 5mhz bump to the FSB. It is slow and steady, but my goal was only to get to 2.4Ghz, so everything else is slowing increasing in speed gravy. :D
 
Nathonius said:
1.8v ??? That's not your core voltage is it? Memory voltage maybe...?
Click to expand...
Your right its definitely his Vdimm.Then again you never know
 
1.8V Core is really too much

BTW I ve noticed a quite large Vdroop on my "rev 2 " P5W DH DL -
in BIOS 1.525 means actually fluctuation between 1.472-1.488 . I was wondering why my CPU suddenly requires a bit more "juice " for the same clocks than before.

Completed 13H Orthos -OK @400x9

Anyone ?
 
Status
Not open for further replies.
Back
Top