Post your "Ghetto Mod" pics

  • Thread starter Deleted member 96510
  • Start date
I think i might win the ghetto competition, simply for ease, cost, and performance. Bar none.

picture45ef1.jpg


Ducted thermaltake silent boost. Took me 5 minutes to make the duct out of an anti static bag and cardboard (so it can flex a bit and be easier to remove/put in ) and i wasnt expecting much to begin with anyway... but on to the good part, my PREVIOUS idle, was 44, same AS5 installation, same everything. put the duct in, it dropped to 32! (this was before the AS5 had set) so i figured id get about 32 when it did... wrong, i had too much so it went up to like 40... reapplied the AS5, idle went to 32... now its set, idle is 28!!!!!!!!!!! my damn ambient is 27! and it cost me nothing, took 5 minutes to make, and i havent even checked load yet :p
 
OMG, I started this thread almost a year and a half ago for a laugh and I had no idea that this would still be going!! You [H] guys rock!!
 
0mega said:
I think i might win the ghetto competition, simply for ease, cost, and performance. Bar none.

picture45ef1.jpg


Ducted thermaltake silent boost. Took me 5 minutes to make the duct out of an anti static bag and cardboard (so it can flex a bit and be easier to remove/put in ) and i wasnt expecting much to begin with anyway... but on to the good part, my PREVIOUS idle, was 44, same AS5 installation, same everything. put the duct in, it dropped to 32! (this was before the AS5 had set) so i figured id get about 32 when it did... wrong, i had too much so it went up to like 40... reapplied the AS5, idle went to 32... now its set, idle is 28!!!!!!!!!!! my damn ambient is 27! and it cost me nothing, took 5 minutes to make, and i havent even checked load yet :p

If you can get me another picture, I will re-judge according to that. However, as it stands, I give it 4.5 foodstamps.
 
picture50ok9.jpg


No CPU's were harmed during the taking of this photograph.

I watched my temps raise a whole 4 degrees for that picture!
 
here is my contripution to this tread. don't know about cat this be considered as ghetto but here is it any way. the only thing that my case is in this state is that i'm curently modding my coolermaster stacker case. you can see my progress here if any one's entrested.
so here's the case:
my.php
[/URL][/IMG]

it's horrible isn't it, if you woundering that where is my PSU, i have it on the otherside of the case..... collecting dust :D
 
Not sure if this counts...I wasn't happy with how loud the stock fan on my new Zalman VF900 was while running full blast (keeping a volt-moded 7900GT cool), so I unscrewed the 80mm fan from the heatsink and zip-tied a 120mm fan over top of it :D.

This 120mm Yate-Loon fan at 7v is silent, and keeps the core at a frosty 38c idle / 47c load, I even got another 20MHz out of the cards RAM. Thats much better than the stock cooler...even if it blocks all but one PCI slot (I'll have to figure out something different if I ever want to go SLI).
 
I bought a 15-foot, 10-foot, and 2 5-foot ethernet cables for $5 from a friend who crimped them all for me. They weren't capped very well, and I kept having to wiggle them and twist-tie them together at weird angles to get them to work because I didn't feel like spending $5 on a good store-bought cable. I've bought new ones since then that work better. Here's a picture I took at one point (it was taken with my ghetto webcam, so the quality's pretty bad):

picture293nd5th.jpg
 
Hmm, that gives me an idea...

*runs off to pull down router, cold-cathode and power tools in hand.*
 
Duct-tape case =Ghetto?

I spent quite alot of time on it though. Staining, clearcoating etc.

No pics sorry.
 
not sure how ghetto this stuff is..... Ghetto is jsut not too much in my nature..

my old antec case needed 120mm front fan cooling... and a better way to put the HDDs in front of it. (had 2x80mm fan mounts)
HDDcage%20002.jpg


The Ghetto style but cleanly installed videocard cooler..
VideocardFan.jpg


Fairly ghetto pump mount...
Pump2.JPG

Pump3.JPG


motherboard volts modes... ewwww...
Motherboardmods.jpg



MY GHETTO ASS WORK AREA IN HIGH SCHOOL OMG!!!!
IMG_0014.JPG
 
Here is my Ghetto external water cooler...

watercooler001.jpg


watercooler003.jpg


watercooler004.jpg


Yes thats a Maze3 with a homebrew Athlon64 mount..
watercooler002.jpg



this acturall worked very very well.. I think i was running my old Clawhammer s754 like 2.5Ghz with this under 30c with the box outside at night, and 40c durning the day....
 
I may have already posted this. I dunno. but!

I got all you '80mm case fan attached to my video card' fools beat.

behold!

laffles010.jpg


For a closer look:

laffles012.jpg



Yeah, that's right. Red duct tape.

It's been running that way for a bit over a year now.
 
Not as ghetto as some of the stuff I have seen in here, but this is my most recent one.

I had to figure out a way to fit that zalman fan controller into the front of my computer when it would not fit with the door on. So notice the electrical tape covering up the holes where the door locked in place and where the hinges were. Then notice the switch next to the fan controller, that is so i dont have to crawl behind my desk to turn the case lights on and off. Then notice the button on the bottom sticking out of the fan grill. That is because when i removed the front panel, i also lost my power button and the reset button is only momentary so it can turn it on, but holding it down is no different then just pushing it once, so it cant power it down in an emergency.

DSCF1221.jpg

DSCF1220.jpg
 
wow a broodwar CD!!!!!!!!!!! I have seen it in sooo long! I have been useing ISO foles t isntall my copy for at least 4 years now. I cant remember the last time is saw a real orignal disk.
 
this is just an old emachines case i use for right now, i cut a hoel the the back and lead the wires down tho the hard drive cage, when i fix my camera i will get the finished product
Picture005.jpg

dcd9804e.jpg
 
From the sig he has it sounds like he did not upgrade the mobo and processor. Emachines (or at least the one i had before this most recent build) used to use the 478 P4s a lot. It sounds like he may have upgraded the mobo though...unless emachines just happened to be supplied by epox at the time.
 
yes i did rebuid the emachines, i put a new mobo because the stock one only hard pci slots, then upgraded the cpu from a celery d 2.66 to a p4 2.8 ht, then i upgraded the ram from no brand name 512 mb, to corsair xms 1gb ram, then put a x800xl, its sooo sweet for an old agp vid card, and i put in a new hdd. the system aint the best but its games pretty good. so the only stock thing in my rig is the case, i just bought a new monitor. all of those upgrades without the monitor cost me 250 bucks, i got the cpu free form my uncle.
 
My brother's graphics card was getting too hot after some over clocking, so I checked it out and it turns out the fan isn't spinning. Great. So I went out to the garage and scavenged an old fan, and after about twenty minutes I came up with this brilliant idea.

p5250143largelq8.jpg


It works pretty well, and the heatsinks on the bottom of the graphics card are cold to the touch.
EDIT: He also just had a hard drive cage sitting on top of the cage that came with the case. I took a screw from some random unused case and screwed one of the hard drives onto the real cage. It was more ghetto before, but here ya go:

p5250145largeuo9.jpg
 
DSC01152.JPG


This was from back in the day, when my fileserver was my only computer. So it needed to be able to game also. Let's just say airflow was not adequate, without taking drastic measures. This was also when I was living in England.

Anyways, I the piece of metal was a leftover from some Brits who were securing signs to telephone poles outside my house. Instead of picking up the trash and taking it with them, when they left, they kindly threw them into my bushes. It's all good, cause I found a use for them.

I had a 10 ft Cat-5 cable laying around that had gone bad. Along the lines of dog + cat-5 = bad. Anyways, I ripped it apart, to get to the wires. Those wires are what is securing the fans in place.

I slapped an 80mm fan in front of the Geforce FX5600 (so I could get some overclocking action) and another 80mm fan over the 512 meg worth of PC-1066 (yep...Rambus). With a 3.06 ghz P4. Oddly enough, I still use the processor, raid controllers, case, and hdds from that comp. Course, it's just a file server now. It's gone through different styles of fan mounting.

DSC01345.JPG


Fans screwed onto PCI slot covers. The Lian Li PCI slot covers have a hole at the end of the cover. Which I threw a screw in and then mounted a hdd with it. Which ended up holding the PCI slot cover in place. Some more Cat-5 wire action.

There's also 2 more 80mm fans in the 5 1/4 bay area, with the covers off. The PC-75 simply didn't provide enough air intake.

IMG_0220%20%28Latest%2001%20Apr%2005%29.JPG


This is more of today. I jammed a Coolermaster Stacker hdd cage into the case. For anyone who owns a Lian Li case knows, every two 5 1/4 bay drive area, Lian Li puts drive rests along the side. I pulled out my trusty Gerber and bent them out of the way to make the hdd cage fit. Yep, the server is sitting on a window sill.

I don't have a current pic, but there's two 120mm fans strung up with some Cat-5 wire. Pretty much, where the 80mm fans from the 1st picture were.

I'll get a recent pic when I get home. My internet blows at home. 12 meg, but feels like 256k. My friend on the other hand has 100 meg and he's not going to be back for a couple of months.
 
well ive been a troll for quite some time now, decided to post up: this is what happens when your bored on a saturday night :p, made a heatsink type deal for my linksys WRT54G, cause the casing would get super hot:

TOOLS/MATERIALS:
IMG_2497.JPG


BEFORE:
IMG_2498.JPG


AFTER:
IMG_2499.JPG


for that extra ghetto touch, my "THERMAL COMPOUND", smells, looks and tastes like tooth paste. if you know what i mean ;) :D
 
i just moved to a new place and i got bored of not having internet...
1000194in5.jpg

1000196ua9.jpg

1000197fn5.jpg


My small project, well failed. the cooler could not keep up... :(
 
peanut butter no jelly
computer no case
fish tank no fish

... im just kidding. what kind of temps do you get with that setup?
 
Here is where krotch has gone wrong is his ghetto pimping effort. It looks like the rich kid (lian li) who wants to live a hood life, it doesn't really fit in with the other ghetto mods. :p
 
... im just kidding. what kind of temps do you get with that setup?

well when it was cold like on the lowest it could go i was hitting 4c :eek: but then it could not keepup so it got to 34c :(

oh well i tryed lol...
 
Haven't been able to open the tray for a couple months now without giving it a little tug ;) and just too lazy to open it up and look at it.


bffc162b92bcbc9f7bd51d21a94f8bf4.jpg


c4d3805a058c30604205fac815881e47.jpg
 
My external water cooling setup, which ended whern the pump died in one month....
I only wish it looked as cool as the guy on the page before.

-Gateway2000 full tower case sawed in half
-water fountin pump
-automotive antifreeze
-Ford heater core
-cardbord fan shroud
-huge gage wire used to run 12v from pc case to fan in shroud.
-did i mention antifreeze?
-steele hose clamps
-Huge azz hose reducers were like 6$ in hardware each because i was stupid and bought them in the plumbing dept. (see above radiator)


This raggedy umbilical project was a misirable white elephant falure, it required draining the entire system to do any work on my pc. Horazontal resavores are stupid.

DSCN2523.JPG


dscn2524ut9.jpg


But the modded Gateway2000 case was kinda cool when its all buttoned up.
**Does my folding card table for a computer desk for 4 years count?
;)
 
Back
Top