Actually, at 70mm x 171mm x 40mm you could probably fit the power brick inside you'd probably need to do some rewiring though.
Got no room since Ive got a 3,5" disk in there. 2.5 TB of storage
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Actually, at 70mm x 171mm x 40mm you could probably fit the power brick inside you'd probably need to do some rewiring though.
Got no room since Ive got a 3,5" disk in there. 2.5 TB of storage
I'd go for the Enhance: Headroom won't hurt.
150W Pico might be cutting it too close with my setup.
I ran a HD 5770 and E8600 it did 14400 3dmarks 2006, on the 150W pico
But best of all, allmost no internal cabels...
hi everyone,
i am planning to build the following system with this case.. for now, i plan on using it as a pure music player (alac/flac using foobar with optical --> external DAC and AMP for headphones only).. and in the future, possibly upgrading it to a media center by adding a TV tuner card, or keep it as a convenient, powerful pc i can take on the go... i will most likely be running vista ultimate 64bit on it just cause i have an unused copy of the OS lying around.. and i don't need to address all 4gb for the use i planned for this box..
i3 530
gigabyte H55N-USB3
2x2GB G. SKILL DDR3 1333
slim internal DVD writer
cooling: stock HSF, maybe extra 80mm fan
(waiting) Intel X25-V 80GB in Q4
(future) TV Tuner card
(external) 1TB HDD, DAC, AMP
will the 65W PSU be sufficient for this, or should i go for the 150W version?
thanks in advance!
Questions is, what power supply can I get that would fit the Antec ISK 300-65 and power the hardware?
I don't mind doing some modification if needed.
I forgot you had the fan and 3.5 HDD, I did see the pictures of your setup - looks cool!
I am actually thinking now that the 150W Pico might be cutting it too close with my setup.
I am currently debating between the:
Sparkle flex ATX 80Plus 220W - (Cheapest and I can get it fast while I have time to work on this project)
FSP or Sparkle flex 80Plus ATX 270W
Enhance flex ATX 80Plus 300W
all about 6.0IN X 3.2IN X 1.6IN - about the same size as the ISK 150W psu
i would by a second. only the psu from the 150modell is very bad!
Why is it bad? Has someone load tested and put a scope on it?
it has a bad performance ~75% i whish it has 90%, i read a articel about it
small update-
Upgraded to Electrodacus' 130W DC/DC PSU which filters the 12V rail (antec ISK PSU and picoPSU does not ). I don't want anything getting in the way of my stability
hi,
where can i buy this PSU? it really cleans up the wiring and sound like a good upgrade to the stock one
thanks!
Okay, just bad efficiency... to me "bad performance" means out of spec voltage regulation or super duper ripple or something like that.
Just an efficiency issue? I won't sweat it too much.
Of course that "review" seems to have just run it with a system...
hi,
where can i buy this PSU? it really cleans up the wiring and sound like a good upgrade to the stock one
thanks!
Good test of the PSU right there... nothing great, but nothing bad either. Just your run of the mill standard power supply.
http://www.hardwaresecrets.com/article/Antec-ISK300-150-Case-Review/934/6
small update
Dear Leifeinar... friend of many battles (Asus Gt220 cooler...)Teaser need some benchmarks
Dear Leifeinar... friend of many battles (Asus Gt220 cooler...)
GT240
HD5570
GTS450
@Blazestorm
sure...
@lvyelion
identical work ...
http://imgur.com/5QkJ8.jpg
sorry i have forgot to write that i have the isk 310-150. this have a 150w psu.
i choose the 310 because it looks nicer ;-)
new tests for new isk