• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

A64 OC Database & Overclock Guide

I should have a week 22 3200+ to put up in a week or two (with rig below). I got screwed by Xoxide who waited 10 days to tell me they couldn't bill my cc to send the PSU. Anyone have any tips specific to the Asus A8N-E? My goal is 2.6 but I wouldn't mind hitting 2.8 while keeping the it pretty damn quiet. That's why I went with the Seasonic and am using Yate Loon 120's for the XP120 and case fan then a made in Japan Panaflo L1A 80mm for the rear case.
 
I am buying a MSI Neo2 board cause i still have a AGP 6800GT :D

But i am getting a Venice 3000+ with the XP90c heatsink...i will post specs and everything else about it :D

And i am going to compare Air to water. And NF3 to NF4...and then i will be done with my review/article on http://www.clan-teamrip.com
 
lithium726 said:
i've got a X2 3800 coming in from newegg! (cf) needs to update the charts ;)
Click to expand...
i do, i've been crazy busy with other things and i'm about to go on vacation for a week and a half, no consistant computer access :(
 
HEY YOU! you gotta ad BW to the list of CPU's. its a E6 venice. get in the game, or ill hafta take over your position. :p
 
rayven01 said:
Figured out what my problem was. The MSI CoreCenter program I was using for temps/voltage readings was unlocking the agp lock. Just using clockgen & mbm I got up to:
2520 @ 1.38, (280x9) stock cooling, prime stable for over 9 hours. Can't seem to get to 285, even upping voltage.
Click to expand...
what are you doing with the ram? where does the mobo top out?

ccu, patience. don't forget our website ;)
 
(cf)Eclipse said:
what are you doing with the ram? where does the mobo top out?
Click to expand...

Ram is at 133 divider (180), I just have value ram and the board lacks a 150 divider so I have to keep it low since it can't handle 166 (229). The board limit is around 330HTT. I did finally get it to stay stable up to around 2700 (300x9) with 1.55 vcore, but the temps were too high with just stock cooling. Tried 315x8 to get the ram up closer to 200 but couldn't get it stable.. board doesn't seem to like the 8 multiplier. So still sitting at 280x9, 2520.
 
Chip: A64 X2 4400
ADA4400DAA6CD
CCMWE0524RPMW

OC:2695 (11x 245) 1.55v
Cooling: Air - XP-90c, plus a bad ass delta

Prime Stable - 24 Hours

I thought I read somewhere about X2's having trouble running 2 instances of super pi since X2's have only one memory controller. As soon as I start the second instance it quits.

Hopefully once I get my Ultra-D back, it was DOA, I will be able to get that extra 5 mhz. This neo 4 platium crapped out on my 3800 venice at about the same HT.
 
My new chip and board and ram will be in tomorrow....can't wait to get it all rockin tomorrow after work....

(thinks of a way to get off early)
 
Venice 3000+ BP

LBBLE 0522DPEW

No OCing yet, but then again I haven't even started up my new computer for the first time yet. I'll get back to you when I do.

I noticed another LBBLE 0522 in the OC database, but it is a DPKW. What does that number mean? Which ones are good ones?

Oh, and I got this from eWiz.com about a week and half ago. Too bad it's not a BW, I don't think they were out when I ordered mine, since I haven't heard about them until today (I've been on a vacation w/o internet for the past week, just got back this afternoon). Just my luck....
 
You got a DOA Ultra-D too? I had one recently. You'd push the power button and the fans would spin for a 1/10 of a second, them turn off. The board/computer would not power on at all. Symptoms seemed to be from a short, but I had it running on an antistatic bag so that wasn't the problem.

dr_dirtnap said:
Chip: A64 X2 4400
ADA4400DAA6CD
CCMWE0524RPMW

OC:2695 (11x 245) 1.55v
Cooling: Air - XP-90c, plus a bad ass delta

Prime Stable - 24 Hours

I thought I read somewhere about X2's having trouble running 2 instances of super pi since X2's have only one memory controller. As soon as I start the second instance it quits.

Hopefully once I get my Ultra-D back, it was DOA, I will be able to get that extra 5 mhz. This neo 4 platium crapped out on my 3800 venice at about the same HT.
Click to expand...
 
Yeah my Ultra-D was DOA. I would power it up, and all it would show is the four debug LED's on, meaning the CPU was not found. I tried my Venice and Winchester in it, and it still did the same thing. Tried 4 different's PSU's too. So it was RMA time. The 4400 worked flawlessly in the MSI.
 
3000+Venice
ADA3000DAA4BP
LBBLE0521BPFW

10 Hour Prime stable: 290x9 @ 1.504V :: 2610MHz
Water Cooled
 
3800+ Manchester

ADA3800DAA5BV
CDBHE 0527UPBW

2.5ghz, 250x10 stablity testing. i am convinced i am limited by my cooling and motherboard... maybe ill upgrade to water soon :D
i think ill wait for a new BIOS and see if helps first though.

edit: it seems far cry likes 2.45ghz more
rolleyes.gif


i have a feeling its the motherboard. this chip should not need 1.5v to get to 2.45ghz... considering picking up the LP NF3 board.

edit2: finially found the cieling on it for my neo2. 2.47ghz. im pretty happy with this :)
 
Venice 3200
ADA3200DAA4BP
LBBLE 0521BPIW
Z711186E51889

305x 8.5 at 2600 mhz(133 divider)
1.577 volts 16 hours prime stable before i stopped it
 
Hi,
I got a
ADA3500DAA4BP
LBBLE 0516DPMW
(3500+ Venice)
I'm not such a good overclocker so I would like some help & advice.
You can look @ my Signature for my system spec.
Im running watercooling with storm as CPU block and maze4 on GPU and an DD5 pump and black ice pro 2 rad.
I tried cornelious & eclipse's method. I got to 240FSB at least at about 1.10-1.25Vcore with 100Mhz RAM, HT: 4X, CPU Multi: 9x , AGP: 67and default ram timings (2.5-2-2-5 2T) on cornelious method.
And with eclipses method i think it was stable @ 246FSB, CPU multi: 11x, RAM 200, HT:4x if I remeber right.
But after that i get easly errors.
I dunno what to do anymore :confused:
So if any1 would help me I would apperciate it.
I tried many many different settings.
I got my cpu to 2.7Ghz and alittle over, but it wasent stable.
I had it stable for over 6h @ 2.64Ghz.
 
3000+ Venice
ADA3000DAA4BP
LBBLE0521BPFW


Boots at 2.434
Prime Stable 24 hours @ 2.4 (267x9)
 
venice 3000+

ADA3000DAA4BW
LBBLE 0522FPBW

Stable @2700 (9x300) on air
Vcore 1.475
idle 32, maxload 40
 
Oh ya baby....i got my new chip and board...and RAM :D

I will get steppings later...i will also be OCing it very soon.

Get rdy guys another Major OC will happen again..and this time it's with AIR LOL!


Here she is
MSI K8N Neo2 Platinum, A64 3000+ Venice@Stock (for now)
2x512, 1GB Corsair XMS Pro C2
BFG 6800GTOC, Core@430 Ram@1080
Air Cooled by Thermalright XP90c With a Vantec 92mm Tornado
 
see rig in sig. venice 3000+ LBBLE 0517 APFW.
Had a 10 hour prime stable with large FFT but didn't take screen shot.

untitled.jpg
[/IMG]
 
I have a venice 3000+

ADA3000DAA4BP
LBBLE 0521APBW

9x285 on water @1.65V

Using a DFI NF4 Ultra-D w/2x1GB of Crucial Value PC3200 - haven't played around with the ram much yet, running 233 @ CAS3 at the moment.

Anyway, its 24 hour prime stable. No screenie though. :(
 
I got me some better ram timmings for my main machine.....


2-3-3-6-T2...still can't get off the T2 :D

w00t4.jpg
 
Update for the YBBLE... I tried it on a DFI Ultra-D, and I still couldn't break 270 even with low multipliers... so looks like it wasn't board-limited as I first though. That, or I'm doing something wrong.
 
I just got an FX57 with these numbers:
ADAFX57DAA5BN
CABCE 0522XPMW

I'M waiting for my vapo to show up, so I havent installed it yet, but will post my OC when all done. Im hoping this chip will OC well.
 
bored-sarcasm said:
3700+ san diego

ada3700daa5bn

cabge 0522xpbw

2781.43 @ 1.4v on air

264.9 * 10.5

see it here

just got this running too. :D
Click to expand...

This is the best 0522 XPBW i've seen. most of those 0522's on XS.org suck and need major volts to do at least 2.8ghz. lucky you. now i hope my 0521 VPAW can do the same or better :p
 
bored-sarcasm said:
3700+ san diego

ada3700daa5bn

cabge 0522xpbw

2781.43 @ 1.4v on air

264.9 * 10.5

see it here

just got this running too. :D
Click to expand...

id stay away from .5x multis. they dont play nicely with A64 like they did with AXP. but awesome OC from that 3700+ SD.
 
Got my new 3200+ and evga board last night

Prime stable for 6 hours so far @ 255x10 = 2550mhz @ 1.48
LBBLE, 0522

Board won't do 1T (won't even post @ 1T no matter what ratio is used for RAM) but the cpu seems to be handling the speed OK. Going to let prime run for the rest of the day to make sure it's stable, then get to fiddling again and see if i can get this damn thing to work at 1T. Memory bandwidth is horrific. (less than HALF what my A8V was giving me with these same sticks of ram :rolleyes:
 
LionKinG88 said:
I'm not such a good overclocker so I would like some help & advice.
Click to expand...
sorry i don't have time to really answer this, but now is where i urge people to read rule #1 again ;)



honkee said:
Venice 3200
ADA3200DAA4BP
LBBLE 0521BPIW
Z711186E51889

305x 8.5 at 2600 mhz(133 divider)
1.577 volts 16 hours prime stable before i stopped it
Click to expand...
i'm assuming air?



lithium726 said:
3800+ Manchester
Click to expand...
congrats on being the first :D



fuelvolts said:
3000+ Venice
ADA3000DAA4BP
LBBLE0521BPFW


Boots at 2.434
Prime Stable 24 hours @ 2.4 (267x9)
Click to expand...
voltage and cooling?



newls1 said:
I just got an FX57 with these numbers:
ADAFX57DAA5BN
CABCE 0522XPMW

I'M waiting for my vapo to show up, so I havent installed it yet, but will post my OC when all done. Im hoping this chip will OC well.
Click to expand...
this will be interesting, hurry it up!


headless said:
Got my new 3200+ and evga board last night

Prime stable for 6 hours so far @ 255x10 = 2550mhz @ 1.48
LBBLE, 0522
Click to expand...
you're missing the batch code there friend :p



and baron, got the sempron division made just for you :cool:
the updated charts should be up in a few minutes
 
Athlon x2 4400+

ADA4400DAA6CD
CCBWE 0529RPMW

Overclock so far is 2550 @ 1.5v. 8 hours dual prime 95 @ 44C.

Cooling is XP-120 with high speed Panaflo

A lower voltage might be possible. Need to test some more. 16% overclock is not too bad.

prime95-8hours.jpg
 
x2 3800+
CHBHE 0528UPBW

2.8ghz at 1.54v
HTT @ 2
Cooled with my 7700Cu
40c idle, 50s load

Havent prime tested or anything, just got this baby to 2.8 about 10minutes ago. Still tweaking memory settings and volts.

http://valid.x86-secret.com/show_oc?id=33886

av6aer.gif



Other misc stuff:

Had it at 2.6 stable at 1.36 volts (HTT: 3) 34-35c idle
2.7 with 1.4 volts (HTT: 2) 35-37c idle
 
X2-3800+
ADA3800DAA58V
CDBHE 0527TPBW

Asus A8N-SLI Premium, 1006 BIOS
Currently overclocked to 2700 both cores stable and mem stable.
HT multi: 4x
HT Freq: 270Mhz
Memory at DDR333

Voltages:
CPU = 1.475V
Ram = 2.70V
HT voltage = 1.25V

Cooling: XP-90 with low speed panaflo. Going to upgrade the fan for more air cooling.
No pretty screenshot yet. Not finished OC'ing. Board is HT stable up to about 283Mhz.

*update* 2nd core failed prime95 after 7.5 hours. cant push more cpu V with the asus bios. :mad:

*2nd update* dual Prime95 stable for 12 hours at 2650Mhz (265Mhz HTT), 3x HT mult. Currently testing 2690Mhz.
 
(cf)Eclipse said:
you're missing the batch code there friend :p
Click to expand...

Didn't get the batch code, sorry :( Just wrote down the main 4 letters and the week code..
3200+ Venice, LBBLE, 0522

It's prime stable 18+hours now @ 2753mhz @ 1.45v.
 
AMD 3700 San Diego
CABGE 0520 XPAW

Asus A8N-SLI Premium, 1006 BIOS
Right now running 512MB of OCZ Platinum Rev 2, will be bumping up to 2GB this week.

2787 MHz 100% Prime95 stable for 8+ hours, can boot into Windows at 2.91, but try to do anything and immediete BSOD

Voltages:
CPU = 1.525V
Ram = 2.75V
HT voltage = 1.25V

Cooling: Thermalright XP-120 with Silverstone FM-121 (moves air at 110CFM @ 3000 RPM, but I run it at 1500 RPM to keep the noise down). Used Arctic Silver 5.

Maximum temps: Idle: 32c, Load: 40c

http://valid.x86-secret.com/show_oc.php?id=34114
 
DFI UT NF4 Ultra-D
Athlon 64 3000 Rev. E6
Failed prime95 after two minutes, but I dove right into the overclock, and didnt try any of your advice. Once the final pieces of my computer get here, Im going to reformat and overclock the right way. I'll post my results when I do. I was just board and wanted to see what this puppy can do :D

 
You must log in or register to reply here.
Back
Top