Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I have an RTX 2080ti, but my benchmarks are low. I'm getting 7886 in Port Royal. My specs are in the sig below.
Did you do any tweaking at all yet? Power limit? Fan profile?
I actually have the RGB edition. From your pics it appeared you did as well. Guess I was mistaken.
OCing a little (2115/+1000 mem) got me to 9k Port Royal. I've never maxed out my memory since that would require installing PrecisionX rather than Afterburner... but I am happy with this.
https://www.3dmark.com/pr/16703
What's interesting is in all cases I've seen so far DXR features drop power usage compared to straight up rasterized. I wonder if there will be a case one day where that is not true. Maybe no RT, just DLSS? I've never tried the Final Fantasy benchmark.
What is your power target at? 110-120%?
I flashed the Galax bios. So with +126% it’s 380W.
I also shunt modded but it didn’t gain me anything over the Bios flash... yet. So far it seems ray tracing is such a bottleneck it holds back the CUDA cores where power usage drops a little.
Just realized that my Port Royal bench made it into 3DMarks Hall of Fame @ #75 for a single card score. Probably won't last long, but hah, not too shabby being driven by a 4790K!
https://www.3dmark.com/hall-of-fame-2/port+royal+3dmark+score+performance+preset/version+1.0/1+gpu
Just realized that my Port Royal bench made it into 3DMarks Hall of Fame @ #75 for a single card score. Probably won't last long, but hah, not too shabby being driven by a 4790K!
https://www.3dmark.com/hall-of-fame-2/port+royal+3dmark+score+performance+preset/version+1.0/1+gpu
Nice! I could probably get on the board if I tried. At 90xx and it starts at 92xx. But it’d be at settings I wouldn’t necessarily run 24/7 lol.
I am pretty sure you cannot flash the EVGA Black card.Hey Dayaks.. Can you message me information on how to flash GPU bios? I'm having second thoughts.. I might give that a try. My card is in my signature.
I am pretty sure you cannot flash the EVGA Black card.
Hey Dayaks.. Can you message me information on how to flash GPU bios? I'm having second thoughts.. I might give that a try. My card is in my signature.
There is a custom release of NVflash that's floating around which will allow your to cross flash between vendors on using the FE PCB (nvflash_5.527.0_modified).
I have, I'm running an FE with the EVGA XC Ultra vBios.I will research this and see If i can come up with something. I figure there's someone that has done it before.
I should point out however that I'm not sure if the Black is running the "A" silicon which would determine how stable it would be using the XC/XC Ultra vBios.
I should point out however that I'm not sure if the Black is running the "A" silicon which would determine how stable it would be using the XC/XC Ultra vBios.
Hey Dayaks.. Can you message me information on how to flash GPU bios? I'm having second thoughts.. I might give that a try. My card is in my signature.
It is not using the "A" binned chip and will not work with a bios made for the "A" binned chips. It cannot be flashed with a higher power limit bios because they are all for "A" chips.
I sent you the place to go. The 380W galax bios worked great on my ref pcb asus dual.
Thanks for doing the leg work on the research. I will keep this in mind down the road when I pick up the next pair of Ti's. Much appreciated.
Thanks a ton for the information. Unfortunately it looks like it wont work on my cards, but I will use the information as a reference. Thank you kindly.
At worst you might be missing out on 5% perf. When you waterblock the cards don’t increase voltage, just max the power limit and increase freq first.
Also when I ran sli with 1080s if they throttled at all my frametimes went to hell. Watch out for that.
Thanks to my RMA, EVGA has sent me both a red and a black trim kit bringing my total to red, white or black for accents. I feared shutting off my system to replace them but settled on black. I may go red later if I turn on the LED of my mobo as it has a red glow theme to it.
Menthol is using a much older driver version than you are (411.63 vs. 417.35). Menthol's score was also done on Windows 10 1803 while yours is with 1809. Yes, 3DMark scores can vary wildly between driver and OS versions.Alright so im comparing another run ( a little lower score ) of TimeSpy Default (2560x1440 etc) with another guys with very similar specs here
https://www.3dmark.com/compare/spy/4494965/spy/5789536#
and I cant for the life of me figure why he is pulling 18.5-22.8% higher in the GPU. If you look at the clock speeds. For some reason mine is showing up as 1/4 of the frequency (known issue) so multiplying mine by 4 and you get 7800 which is true my mem clock is 7800 and his was only 7650mhz. My temps are only 61C. His core clock speed is also lower at 2050. So what is happening?
Lastly, looking at his CPU his is OCd way higher which I will be doing an OC on my proc in feb when i get the custom liquid setup going etc.
Menthol is using a much older driver version than you are (411.63 vs. 417.35). Menthol's score was also done on Windows 10 1803 while yours is with 1809. Yes, 3DMark scores can vary wildly between driver and OS versions.
I don't have the NVLink bridge yet, so no SLI results to report, but single card is insanely fast.
No formal benchmarks to report, but for my deep learning project the 2080Ti is about 25% faster in FP32 work.
I did some gaming last night, PUBG for about 2 and a half hours, 4K Medium AA, High Shadows, Ultra everything else and it's incredibly smooth.
The experience was on par with my 1080Ti at 4K with low / medium settings.
I don't have the NVLink bridge yet, so no SLI results to report, but single card is insanely fast.
If you can take advantage of scaling your data to 16bit or even 8-bit range, you will see a big performance increase with the 2080ti for both inference and training aspects of deep learning.
And the Ti version is gone. Regular 2080 version is still in stock.EVGA HYBRID kits are in stock as of this posting. The ones in stock are for those using the reference board. FTW3 versions are still out of stock.
https://www.evga.com/products/productlist.aspx?type=18&family=Cooling&chipset=GPU+HYBRID+Cooler
View attachment 135912
If they had this earlier I probably would have got it instead of the two hydro copper water blocks but now I am fully committed to a custom liquid loop! Only have fans, fittings, and tubing left for the end of the month paycheck hype!