Hello,
I need a few suggestions for this upcoming build. I intend to build this as soon as I get the Ncase M1 case (Mid March). Prices are listed CAD including 12% tax, as I live in Vancouver, BC.
Already owned parts include the EVGA 1080 Hybrid, an ADATA 512 GB 2.5" SSD and a shucked 8TB 3.5"...
AsRock_ - Please hang tight for a minute, read over the speculation(s), I will circle back around to why I mentioned you...!
So, a little speculation on what we may see coming in the next year from AMD...!
Obviously, the above is a roundup of some recent AMD rumors...
Whether or not you, the...
Hey guys,
I already have a NCASE M1 and was running it as my gaming rig. Had some i5 CPU and a Titan X in there with a custom water loop and 2x 240mm radiators. I remember things getting too hot in there for my taste even after installing the second radiator. At the moment I am running 1080 SLI...
So I just finished this mITX build in the NCASE M1. I'm very satisfied with the results and the PC works great. The idea sprung from seeing Bluehandstech's M1 build, I instantly knew I had to get this case and watercool it. I decided early on that I was to use hardline tubing only, and with...
Hi guys,
I thought about posting this in the NCase M1 thread but decided to open a new thread instead...
I'm in the market for a new GPU and have decided on a GTX 1070. My build is in an NCase M1 so I'm not sure which of the many available models of 1070 would suit me best. I know that...
Project Omni
I've had an enormous case for way too long now: EATX form factor with an old GTX580. It's time for me to update my system. I've taken on the challenge to stuff as much powerful hardware (as I can afford at the moment) in the smallest case as possible. This is why I've chose the...
So I'm having trouble finding the right screws to use for my NCASE M1 radiator. The problem is I can't find radiator screws that have a purely flat head with no countersunk bottom. I need it flat so that the magnetic filter that comes with the case sits flush against the radiator fans (if the...
Hello,
I did just buy the Noctua D9L and put it in my ncase m1, But i think my temps are higher than it should be running a Intel i5 5675c at stock speed 65w tdp and my Gpu is Asus Gtx 670 DC II also running at stock. I think my problem maybe that the gpu i dumping to much heat into the...
Some people on the Hard Forums have problems using the Maximus VIII Impact motherboard Q-Shield with the NCASE M1 Chassis. The foam backing on the I/O shield makes it difficult to set the motherboard. How have others worked around this problem?
I am considering one of these cards for my build in an NCASE M1 but the width is limited to a maximum of 140mm for the GPU. According to the specs for these cards they are right at the maximum but it appears that the power connector is inset from the edge of the card. I was wondering if any...
Hey everyone, so I recently got my Ncase M1 and am looking for a few tips on cooling.
My components are as follows:
CPU: Intel i5 4670k
Cooler: Noctua U9S(1 fan) or Noctua U9B-SE2(2 fans) or Cryorig C7
Motherboard: Asus Z97I-Plus
RAM: Corsair LP 8GB x 2
SSD: Samsung Evo 250GB
HDD: Seagate 2TB...
I recently built a high spec NCASE M1 rig with the Asus Z170I PRO GAMING motherboard running Windows 10. I installed an M.2 HyperX Predator PCIe SSD into the rear slot on the motherboard. It all worked fine and was very fast for nearly four months. The SSD has now failed with the error message...
Hey there,
I thought it would be a good idea to share my process of this project.
Where I come from:
I was operating a Titan X and i5 CPU inside the NCase M1 for some time. Until one game did use the CPU more than any other game before, which resulted in temperatures of the components, one...
NCASE M1 rev 4.0 | Hard Tube Water Cooling
Small But Unsimple
I. Introduction
This is my very first self assembled water cooling build. Through all the years, I have been admiring all other people's build, showcase, and pictures. I build a few machines for myself, family and friends all the...