Search results

So my dad's Dell 700m's high capacity battery started to not hold a strong charge a few weeks ago, so he decided we would replace the dead cells inside rather than get a whole new battery. He bought the maximum capacity cells that he could find with the same voltage rating, and they were a...

So my parents are building a house and they charged me with setting up a network for them. This is a big house, and they have some pretty big concerns. Currently, they have ethernet cable running to 8 rooms plus an additional cable going to the attic above the 3rd story for a WAP (question...

I just bought a laptop on ebay and it didn't come with the little right angle adapter for the hard drive's connector. It basically lets you push the hard drive down horizontally into the compartment, it uses a bunch of spade like connectors instead of straight pins. Any idea what that thing is...

So I'm sooo close to finishing my millett hybrid. I originally bought all the parts and made a mistake and bought the wrong volume pot. Well, I finally ordered a new one (after months of it sitting here collecting dust) and a TREAD power supply just for kicks. I'm thinking of some AD700s to...

I finally got some tubes to finish my millett today. I turned it on, adjusted the bias to 12v, plugged in my ipod and headphones and was greeted by lots of static with my music and it only played on the left channel. Turns out I used the wrong kind of volume pot and it ramps up one channel...

Unfortunately for me, I was sliding my 300gb SATAII seagate into my antec p180's lower bay the other day and the long sata plug somehow hit something in the case and snapped off the plastic tab on the drive's connector. Lucky for me I'm excellent at soldering, so I was able to repair it, but be...

Ok guys, time for a much needed upgrade. I'm looking to trade for 2gb of DDR2-800, an C2D e4300, or maybe an e6300. What I have: 1GB (2x512) Adata Vitesta DDR-500 PC-4000 ram. This stuff is quick. I took good care of it, only ran it at its rated speed and voltage. Has been known to do 290+...

Hey guys, I'm looking to trade for an S939 X2 or opteron dual core processor, or 1+gb of PC3200 ram or better + or - some cash. What you see in the pics is the watercooling kit I've been running for a while. A few months ago, my pump died and I had to RMA it back to DangerDen. You can see...

Well, I'm very sad, my 2001fp was having problems yesterday turning off randomly and flashing the power button and then coming back a few seconds later. This morning I go to turn it on and I just get a black screen with a flashing power button. I'm quite angry, I wish I knew how to fix it...

Just as the title says. Will also consider an 939 X2 of any kind. Looking to spend 130-140. Let me know what you all have. Heat: killernoodle AIM: SwissPatriotRG Email: [email protected] ([email protected] preferred)

Hey guys, I have got these graphics cards from new system pulls and am looking to get rid of them ASAP. There are 4 total. They are all brand new and unused and have been kept and will be shipped in anti-static bags. $170 shipped each, will ship DHL ground with tracking code. I'll...

So I figured out today that my pump has not been working at all for god knows how long. My computer runs 24/7 and has been running unchecked for a LONG time (probably 6 months). So I open up the case today to put in a friend's HDD to fix it and find that my pump is not vibrating at all. Yeah...

I have an older model HTD level 3 12" subwoofer and the plate amp on the back tends to blow out fuses a lot. Just today, it blew out a fuse as soon as I put one in, so I'm thinking the amp is going bad somehow. I'm thinking about converting it to a passive woofer and just buying a pro audio...

Just moved into my new apartment at school. Needless to say, this was the first thing I unpacked and set up: So I got the HD DVR, my homemade steel AV shelf, an $80 720p upconverting Sony DVD player, the $180 HK AVR-320, my $300 HTD level 3s, my $535 toshiba 52HM95, and my $200...

I need a HTPC case, it has to be the standard width of audio components (about 17"), black or silver, no other requirements. It can be m-ATX or ATX and can be with our without power supply. Even 3U or 4U rackmounts would be acceptable. If you got a cheapie desktop case that you need to get...

I have heard a lot of people say that power conditioners dont work worth a damn, but I have evidence that they do. I have a HK AVR-320 receiver and it has a knack for turning itself off whenever the fridge, AC, or any other high power draw device turns on in the house. I'm talking like every...

My GF has a Gateway 7000 series laptop and she broke her screen. I know it can take a Samsung LTN154X1-L03 panel, which is an WXGA 15.4" screen, but would it be possible to upgrade this panel to the LTN154P1-L01 WSXGA panel without complications?

$65 for the Mobile Barton shipped, which comes with a copper shim for safer heatsink mounting. $35 for the mobo shipped, comes without a backplate since I lost it, but that doesnt affect the operation at all. I wouldnt worry about it. Just mounted a Zalman heatsink on the NB with AS5. $90...

Its time to upgrade my system, and I still need to keep it reasonable price wise. Please gimme an offer. I'm thinking $120 ish for the processor. As for the waterblock, it needs to be S939 compatible. Thats about the only requirement. I'm open to any ideas.

I have an ATI 9800 pro video card, 256bit memory version, not the crappy 128bit non pro version. No external hard mods, but was successfully softmodded to 9800xt + specs and runs great at those speeds. The unit will ship without a heatsink unless I go home and find it friday. I have had it...

Up for sale is a computer my mom bought me for christmas that I really dont have a use for. I told her that I was going to upgrade my desktop or get a lesser laptop, but I guess she got confused and got me a lesser desktop as a surprise. This thing is BRAND NEW IN THE BOXES AND IS STILL UNDER...

Up for sale is a Gateway model 205 projector. Here are the specs: http://www.projectorcentral.com/Gateway-Model_205.htm MSRP (USD) : $1,099 Brightness (Lumens) : 1000 ANSI Contrast: 1100:1 Weight: 3.8 lbs. Size (inches) (HxWxD) : 2.2 x 9.8 x 6.7 Throw Dist (feet) : 4.9 - 26.3 Image...

I'm looking for a decent sounding card to go with my HK AVR-320 receiver and HTD level 3 5.1 set. My onboard audio has problems with noise when running at a high output level, it forces me to put my reciever to -10db or more (see LOUD!!) in order to be able to turn the computer's output down to...

I've just recieved my upgraded music system and need to sell my beloved klipschs. What we have here is the venerable 4.1 set with upgraded speaker wires all the way through. This was my major complaint with the set when I first bought it: all the power was going through a headphone connector...

I am going to upgrade to an A5 system, so this 98 needs to go. Basically, it is a black 98 custom with a few mods I did a couple years ago. It has: Flatline Barrel System Extreme Rage motorized hopper (brand spanking new) A dropout I made from a 1/2' thick piece of UHMW plastic...

Brand new but not in box (never used) Asus PC-DL motherboard. Comes with all of the accessories, manuals, ect. Dual Xeon capable, can be modified for 800fsb naconas for major speed Takes normal memory! Uber overclocker with 1.6LV xeons. If you dont know this legendary board, check out...

Information: AXMH2500FQQ4C 238854B40595 IQYHA0407YVPMW This is a good CPU, used for about 3 months. I had it up to 2.7ghz, but I didnt like to run it that hot so I backed it down to a very stable and very fast 2.5 (250x10). Asking $65 shipped AIM: SwissPatriotRG Heat...

http://www.goldmine-elec-products.com/prodinfo.asp?number=G14960&variation=&aitem=7&mitem=7 These are pretty good for watercooling because they are high pressure. Pretty extreme fans as a whole. 38mm thick. 130cfm. That is $1.67 per fan.

DC-T50 camera, basically brand new, I just took off the plastic screen protector stuff to test the functionality of the camera before putting it back in the box. Comes with all the accessories: Battery, A/V cable for watching videos and viewing pics on any TV, USB cable, Carry strap thing, 32mb...

This is a Dell Latitude that I purchased on ebay but really dont use that often. It comes equipped with: 866mhz P3 mobile with speedstep 256mb PC-133 memory on 2 dimms 12.1" XGA screen with a new flex cable and inverter 20gb HDD Built in 802.11b Wi-Fi mini PCI card 24x CD 3.8 lbs...

This is a Dell Latitude that I purchased on ebay but really dont use that often. It comes equipped with: 866mhz P3 mobile with speedstep 256mb PC-133 memory on 2 dimms 12.1" XGA screen with a new flex cable and inverter 20gb HDD Built in 802.11b Wi-Fi mini PCI card 24x CD 3.8 lbs...

1600DP/512/400/1.30V These are the superior D1 stepping cores which can overclocked to 3.2ghz and beyond on PC-DL motherboards and 1.55v. Dont miss out on having possibly the fastest cpu combination for the money. I originally bought these on ebay for $110, but I dont have the cash to buy a...

I figure I can get the set for about $230, the waterblocks for $80, but would there be a performance benefit over a mobile barton 2500+ @ 2.6 in gaming? I usually run itunes and a FTP server in the background 24/7, plus AIM and a few other programs. I have noticed that my computer becomes...

Item is no longer for sale.

I have a dell c400 laptop, it has a 12.1" LCD screen and is having some problems. The screen will randomly flash white and white lines will appear across the screen randomly whenever it is on (even in the bios). It is clearly a hardware problem, but I cant figure out what is inducing the...

Just as the title says. Comes with 1/2" barbs pre-installed. This is the second revision, the one that has the customizable barbs. Paint is still a very well finished black. Some very minor scratches. No bent fins. Overall, the radiator is in near perfect condition. Pictures can be...

I should be getting all of my parts today from various manufacturers and websites, so I should be building my new case and stuff today, tomorrow, perhaps a few more days. Here are my design goals: All black case, this is crucial A silent system all together A no nonsense style with few...

I have for sale a Black Ice Extreme in all black of course, with 1/2" barbs. It is very clean and shiny, all bent fins have been straightened (there were a couple when I got it) and I recently flushed it out to get out whatever might be in there. This is the newer version with removable barbs...

Thermaltake Tsunami w/ window I was considering getting this case, and Xoxide seems to be packing a few extras in with it, and it is already one of the cheapest places to get it. Case + accessories: 119.99 Mouse pad alone: 24.99 Cathodes: 7.99 Newegg case price: 122.98 Looks like...

Ok guys, just putting up some watercooling gear. Black Ice Extreme 120mm radiator. Excellent condition, very clean. Had some bent fins that I straightened, you can hardly notice it. It has no barbs on it, but it has 1/4" NPT threads so you can fit the standard 1/2" barbs on it. If you...