These aren't Cisco switches, the 10g swiches (which I'm having problems with one of them) is a Qunata L6BM switch. The OS is quasi-cisco which is quite annoying to use.
Well, I still don't know what the problem was. Working from home last week and the beginning of this week.
I think there is something weird with that switch, a weird routing database or something that wasn't cleared an isn't easily found.
My work around, move the cable to the other switch and...
Alright, I reset the switches and still having the same problem... 10.10.1.81-84 cannot ping 10.10.1.99(backup server)
Here is the base config (just admin pass and ip set):
(FASTPATH Routing) #show run
!Current Configuration:
!
!System Description "Quanta LB6M, 1.2.0.18, Linux 2.6.21.7"
!System...
Well, looks like there must be some sort of port separation, vlanning or something.
The switch was laid out like this:
Port 1-4, 10.10.1.81-84
Port 23, backup1
backup1 can ping 10.10.1.81
backup1 cannot ping 10.10.1.82-84
Moved backup1 to port 5
now it's different
backup1 cannot ping...
Well, arp -a is interesting. Going to have to investigate this some more:
root@pve1-backup1:~# arp -a
? (10.10.1.81) at 00:8c:fa:5a:b3:a0 [ether] on enp8s0
? (10.10.1.82) at <incomplete> on enp8s0
? (10.10.1.83) at <incomplete> on enp8s0
? (10.2.0.2) at 00:50:56:8f:2b:ff [ether] on vmbr0
...
Sorry for the late reply.
Three subnets are what the software asked for...sort of.
10.2.x.x /16 - Management/Network traffic, dual gige
10.10.1.x/24 and 10.10.2.x/24 is for High availability and cluster management, 10g
there is one more not listed cause it works fine and doesn't need to goto...
Please check out this setup.
The 10.2.1.x network works no problem
However the 10.10.1.x network is causing me issues.
This is not a routed network, just a 10g switch with the 10g cards plugged in and no gateway.
All the networks are /24
10.10.1.81-84 can all ping each other no problem...
Hey,
So solved this with Veeam. Since we have a valid vmware license Veeam was able to do a quick migration from one storage to another. Even with the IO errors every 30 minutes it was still able to migrate.
Thanks everyone for the suggestions!
We do have replacement drives. My fear is that the drive will start to rebuild the newly inserted one and the other will fail causing the array to fail so trying to get all the VMs off those failing drives to shared storage.
We use Dell branded drives in these servers.
A cluster...
I'm trying this: https://kb.vmware.com/s/article/2141355?lang=en_US
vmotion.maxSwitchoverSeconds =900
fsr.maxSwitchoverSeconds = 900
See if that helps at all.
Hey,
So at my work we have a 4 node ESX 5.5 cluster on r710s. Each node has local drives (this one has 4x 1Tb SATA in R10) and dual gige to a 3220i with 24x500gb drives.
Yes I know it's all old but still running good and plans to get onto a 4 node c6220 later this year hopefully.
Anyways, the...
I possibly have found it. Just by measuring the battery slot it looks to be a 1632 type. The BR is the one that Cisco recommends for longer drain life but the CR1632 is what I'm going to use since it's readily available.
I'll update again if this does the trick or not.
Hey,
So we had a failure of our supervisor in our c6509. The beast is still running but want to get another supervisor in. Bought some off ebay however we didn't notice in the ad that all the memory and batteries were taken from the units.
On the sup720-3bxl-v08 the battery is larger than the...
James21, Thanks for the reply.
I'm not sure why but once the install was done in the OS it only showed the three drives.
So really, in there end there doesn't seem to be a problem. Just not sure why it was showing double the drives during install.
Hey,
I know this hardware is older than dirt but it should work to get me some cheap storage.
I've got this so far:
pe2950 w32g ram
it has an internal PERC6i
I added PERC5e to connect the MD1000
the MD1000 has 2 controllers
There is a SAS cable connecting to either external port on the PERC5e...
I'm trying to wait out for a 12+2 bay r510. That would be perfect for what I need. Throw an old h700 in there and you'll get some decent storage space for a long time.
I didn't know that about used HP servers. I've usually only ever bought Dells (like 2950s and r710s). If I could find me a 12 bay r510 that would be excellent....but those are pretty rare.
I'll keep any eye out for super micro versions of what I'm looking for. So have you had any experience...
Hey,
So looking on the kijiji in my area and contacting a few sellers I've come across an interesting option. I haven't seen one of these servers in the wild so I'm checking with the best source on the internet....the [H].
A Levono RD240
CPU: 2 x e5620 Intel Xeon E5620
RAM: 24 Gb DDR3
8...
PliotronX,
Thanks for the info.
netsh int portproxy show all --> <blank>
Yay.
No weird routes that I can see in there. I'll try to disable IPV6 tonight and see if that helps.
Yes, I've tried Chrome and IE, both with the same results. That's why I tried the TCPING to make sure that it wasn't...
tazeat,
We are in the process of building a new production IIS server and I definitely agree with you there. Just hoping to get this bandaded until I can get the other server operational. :-/ And yes, definitely 2016 ;-) Our whole hosting platform is being rejigd.
Hi,
No, the external interface is a direct connection with a static IP.
Plus wireshark doesn't even see the HTTPS connection attempt on either NIC, only the TCPViewer sees the attempt.
:-/
Hey,
So found that one of our Server 2008r2 machines was infected with Malware due to the AV being turned off (still investigating that). Got the MS offline virus scanner and it cleaned up the few infected files. Rebooted, scanned again nothing left.
This machine is now unable to browse to...
Ugh, busy weekend :-/
Thanks for the reply bman, very informative. I was going to setup an ESXi box at home with all the requirements (Since there would be no cost on that). Monitor the traffic that he is pushing with a couple of the files that he would need, and go from there building the...
Thanks for the replies!
I haven't set anything like this up before. So all info is much appreciated!
Yes this is for a company. I've only priced out the sophosXG at about 5k USD is pretty pricey.
The client doesn't have a budget since they have no idea on a cost for something like this.
Was...
Now when I say lots, I'm not thinking thousands. But between 50-100 connections. Was going to build an ESXi box with three servers:
1- pfsense for firewall and VPN connections
2- Windows 2016 - Domain controller
3- Windows 2016 - File and database storage server
This is all just thoughts...
Hey,
So I'm trying to get a Linux (Virtuozzo 7) with a storage back end and data on their own bonded connections to a c4506. To throw more fun on the fire I want to have the data channel with a bunch of vlans on it.
I'm having problems wrapping my head around why a bonded connection needs to...
Hey
So just had great success with window FX for our Halloween display. Now I want more.
Has anyone setup or worked with or thought of a Halloween or Christmas or whatever display that would shoot from multiple projectors on multiple window and the animation would move from one window to...
Thanks peeps. I'll make sure the window is big enough in case it wants to take a huge amount of time. I see your idea of splitting the windows updates and security updates, is that a good idea?
So, found this server for a company I'm doing some work for and it needs 212 updates. What is the best way to go about this. I'm assuming if I apply all the updates we are looking at probably a 4-6 hour window that the server will be down. This is an Exchange server and should most definitely...
Hey,
So I have been given a task to turn some TVs at my daughter's gymnastics club into signage. Currently they have all the TVs connected together using component cables and a splitter to a DVD player which they burn a new disc for any changes to the presentation. However they want to do more...
Hey,
So I got this server off of kijiji. $200. Pretty decent for a home lab with 58Gb of ram.
However the controller in this thing is unable to support >2tb drives. This is a problem, I'm wondering if something like an h700 can go into a server like this and still work and be detected by the...
Well, I guess I'm a bit of a liar,
Looking through these instructions on setting up a DAG:
http://windowsitpro.com/blog/exchange-2013-dags-windows-2012-and-cno
It indicates to disable the DAG CNO in AD. With that disabled it wasn't able to connect to the FSW, when I enabled that I...
Hey,
So We have an exchange setup with 2 Exchange servers and 1 FSW. However, for some reason the FSW stopped working on the DAG and I've been trying to figure out how to get it working again.
The error is:
This is what I've done so far:
-Checked for any disabled accounts, don't see a way...
So it's not recommended to forward all port 25 traffic to the barracuda but rather use DNS (MX) to point to the barracuda.
Sounds good to me. Don't have to worry too much about the port forwarding then.
Thanks!
Hey,
So I have a client that has no firewalls in front of their servers is colo. It's a couple a plesk servers so needing specific ports open. On these servers there are already static IPs assigned so I wanted to drop an extra c1811 I have here in place. I setup the bridged mode between...
Nate,
The other md3000i has a mishmash of 147gb sas, 450gb sas, 600gb sas and 1tb sata in odd sized LUNs. I'm looking to set this one up properly to give the best uptime incase of a hard drive failure.
This will have everything you just mentioned ;-) VMs, File storage, Databases and...