ill give the coke can thing a try....idea sounds simple enough...
im thinking what would happen if i hang a chinese style cooking pan in the corner of my room to redirect the signal.... :D
just realized the router has fixed antennas....sigh..
i've angled the antennas in x, y, and z directions and will see if that will improve my signal on the 2nd floor...
my router is in my basement on the left hand side of the house, should i point the antennas to the right hand side since all my wireless devices are used on the right hand side of the house?
i have the router standing up, and the antenna is pointing upwards toward the ceiling...like the attached pic (borrowed pic)...
any suggestion on how i should point it to get better signal?
Hi ppl,
How can I increase the wifi range/signal on my Trendnet TEW-633GR? I have it setup in the basement and I can get signal on second floor, but sometimes it is a little weak. I'm using the wifi on my iPhone so there's nothing I can do software wise on my device.
Is there a...
Hi ppl,
I'm using a Asus P5Q Pro motherboard and I plugged in the stock E8400 cpu fan and 3 case fans onto the motherboard. I used the CPU_FAN, PWR_FAN, CHA_FAN1 and CHA_FAN2 slots and have the bios set to "silent" profile to reduce the rpm of the case fans when idling. I'm using the Antec...
Hi ppl,
I'm building a new HTPC and was wondering if any of the micro ATX boards with the onboard 8300/8400 graphics can handle the Apple 30" Cinema Display? Also, I need it to output to my Samsung LN40A550 HDTV via the HDMI and pass through the audio as well.
This board will mainly be...
I enabled Cool 'n Quiet in the bios, what else do I need to do in Windows (XP Pro)? I think it's loud because when I use the computer I'm less than 1 feet away from it. :p
Could it be one of my other case fans? I use the TT Lanbox Lite and the fans that came with it...
Hi,
What is the stock cooler fan size of the AMD Kuma 7750? 70mm? Can I replace it with another fan? The stock fan is too loud for my HTPC build and I don't think I need a new heatsink/fan since its a HTPC with no overclock and not powered on 24/7.
Also, if I replace the fan should I get a...
does the Coolermaster Gemin II have problems with the 2x60mm fans in the back? also, can you still pull out the motherboard tray with the Gemin II installed?
Hi ppl,
I just built a HTPC with TT Lanbox Lite and AMD Kuma 7750. The stock AMD heatsink fan makes a high pitch noise and I can't stand it! I went in the bios and already changed the fan from 5v to 4v but it's still making too much noise to my liking. I am not overclocking and won't be since...
I'm considering the Scythe Mini Ninja for my TT Lanbox Lite, but I'm worried its too tall.
I'm reading on the forums the clearance for the heatsink is only 100mm but the Scythe Mini Ninja is 110mm...
If it fits I'll definitely buy one since its the only low profile heatsink with a fan that...
Here's the latest on my build. Again advice/suggestions are welcome.
ASUS M3N78-EM AM2+/AM2 NVIDIA GeForce 8300 HDMI
Western Digital Caviar SE16 WD3200AAKS 320GB
CORSAIR CMPSU-400CX 400W
Thermaltake LANBOX Lite VF6000BNS
AMD Athlon 64 X2 7750 Kuma 2.7GHz Socket AM2+ 95W Dual-Core black...
Thanks for the reply!
The reason I chose the 5600+ was because it uses 65w instead of 95w like the 7750. I was trying to keep power consumption and heat down as much as possible. But I guess 65w vs 95w doesn't make a big difference in power consumption/heat...right?
Also, which is faster...
Hi ppl,
I'm trying to build a HTPC to play my 720p/1080p mkv files. Can anyone recommend me a MicroATX motherboard with onboard video and HDMI output that can handle the 720p/1080p movie files without an additional video card? Also, I need the onboard HDMI port to send audio as well. I will...
wow thanks for the info guys...not trying to start anything here :)
i guess why i asked was because in the past when i used my Intel P4 3.0 HT the stock cooling wasn't very good, so i had to upgrade to a XP-90...
Hi ppl,
Does the E8400 cpu need aftermarket cooling if I only use it for web surfing, converting videos (uses about 60% ~ 70% load), and hd movie playback? I'm using the stock cooling that came with the cpu box.
I want to prolong the life of the cpu for as long as I can, and I won't be...
another question, if the file server is only for storing and distributing files, will any onboard video work? or do i need a separate video card? what's the benefit?
Thanks for the quick replies guys!
This machine will solely be used as a file server. Will probably be using onboard video, quad cpu, 4g or 8g ram, quad port nic cards x 2...and that's about it.
I was looking at the Corsair 750TX so I guess I should be fine?
Thanks again!
Hi ppl,
I'm trying to setup a 20 HD raid file server with this case: http://www.norcotek.com/item_detail.php?categoryid=1&modelno=RPC-4020
Can someone recommend a power supply that can handle 20 HDs? and also support the usual Mobo, CPU, Video Card, Memory...
Thanks!
I have successfully tested and now running the new HTPC with my TV! It works awesome and very smooth playback on anything I throw at it, even 16gig 1080 mkv!
I am now using XBMC and it has a 'Suspend' function and I think it sets the computer to standby/sleep mode instead of hibernate? Also...
i mean...i dont want it to be on 24/7...just on when i watch movies and stuff...
if i let it go to sleep when i hit power button, can i wake it using remote? or i have to press power button again?
Yeah!
I installed everything and got WinXP running. Also, I installed MediaPortal as frontend and set it to automatically load when boot up....
I connected my old SnapStream Firefly remote and it works like a charm!
Now I need to connect it to my old tv that only has DVI-D connection....haha...