Hi. My TV does have preset menus depending on the input. For example, I could adjust the image position via VGA input, but that option is not available with the HDMI inputs (unless I am somehow missing it in the menu). the panel is a Vizio VX42L.
Hi. I just bought a HIS 6950 2GB card and hooked it up to my LCD TV via HDMI (2008 Vizio 42" that supports 720p and 1080i). In both 720p and 1080i, the image is not centered. I know about the underscan/overscan slider and scaling options, but none of these help as the image is not centered so...
Hmm. I'm going to upgrade from an 8800gt and I'm torn between a 6970 and 470. The $20 price difference doesn't bother me, and I game at 1680x1050. Any thoughts? I've seen a number of reviews on other sites that seem to place the 6970 a bit below the 470 in some aspects. Still, I'm thinking that...
Hi. I have a very annoying problem. As shown in the following screenshot, the nic in my computer has three addresses. I only want it to have 192.168.0.25, but somehow it has assigned two other addresses to the card. This is causing an ip conflict on my network. I was wondering how I can fix...
Hi. I had to try to recover deleted data on a friend's flash drive a while ago and the best result I got was to use photorec to recover the .chk files which it then attempts to rename using the file header. A guide is here:
http://kentbrewster.com/easy-flash-drive-data-recovery-with-photorec/
Looks like my ram bought it..everything at stock and I still get errors plus memtest shows errors. Memtest showed the errors at higher addresses, so maybe that's why I only notice it in games. I should be able to rma it still. Thanks for your help.
I will try that,I have not gotten around to it. I am curios as to how this could be a symptom of bad ram,I always thought bad ram would cause a hard crash in which the pc would bsod or reboot.
Hi. As of late, I've been getting low memory errors whenever I run games. It gets to the point where memory faults eventually crash the game if I don't get a low memory error. The specs of my pc are in my sig. I've never had this happen before,and I can't think of anything I've done,installed...
Thanks for letting me know. That GetDataBack program didn't even detect any files, nor did most other programs including the Ontrack data recovery program which is what I'm guessing Geeksquad uses as they contracted with Ontrack. The only program that actually got those files back was...
EDIT: Sorry for the crappy origional post,I'll try to clear up what is going on. A friend of my family had a bunch of files stored on a flash drive that were not backed up anywhere else(that's changing now of course...). A few days ago, the u3 drive updated and from what I can understand, the...
Hi. I use Audacity to record streaming radio. Back when I had it on XP, I could adjust the input level slider and the meter toolbar would reflect the change,this way I could make sure I was not clipping. I use vista now, and the Audacity meter toolbar does not respond to the input level slider...
Hi. I just installed the 177.39 drivers. Upon installation,I noticed that my nvidia control panel is missing all options for overclocking/changing fan speed,etc. I was wondering if this is normal with this release. I tried reinstalling,but that did not seem to help. Thanks.
Hi.I have had a wc setup for about six months now. I've had to add a bit more water once because the level dropped a bit(it wasn't quite sucking for more water..just short of that). Now, my t line level has started to drop again. Is this normal due to evaporation/tubes soaking it up? I've only...
Hi. I just set up my first wc cpu loop. I have the t line on the suction side of the pump. When I first started filling it, it was fine. Now,when I start and stop it after filling it a bit more, some water spurts out the t line. If I close the top of the fill port,it does not seem to try to...
Ok. I have about 4 gallons of distilled water and some isopropyl alcohol(as suggested by the people at xtremesystems as it's less corrosive) that I will use to flush it.
Hi. I know they are self-tapping. I'm pretty sure mine didn't come with any screws,I've checked everywhere inside the box. What size/type should I buy from a hardware store?
Ok,it helps to know that it may not have been intended to come with screws. In that case,what type of screws do I need to buy for it? I believe I remember hearing that they are 1.25 in long,but I'm not sure about the specs.
Hi. I just got a thermochill PA120.2 In the instructions,it talks about 'the included screws'. I was wondering where everyone found these screws,I can't seem to find them in the box the rad came in. I know it sounds dumb, but I want to know if I need to go out and buy screws now, and if so, what...
Just saw on Ptera's site that the DDC-2 is the same as the MCP355,so I guess I;ll try to find that pump. I believe the clear plastic barbs are what comes with the 120.2 I will be getting...but like I said I think I may go with the ncixus barbs since they are not plastic. Some pics would be...
So when websites list it as a 3/8 fitting it does not mean a 3/8 tube size? I was kind of confused that as popular as thermochill rads are, they would require a 3/8 tube. So G3/8 will work with 1/2 tubing? I noticed now that on the website page at Ptera's,it says "G3/8,supports all hose sizes"It...
Hi. I will be putting together my first WC setup when I build my new rig over the next week or so. It will be a cpu loop to cool a q6600. Here are the parts I plan to buy form Petra's tech shop(only place that had the parts I wanted in stock-looks like a great store)
D-tek fuzion
Thermochill...
Thanks for all of the replies. My last question is why a shroud is required. It seems odd that there is only one retail shroud made if they are required on radiators,or is it not required?
Hi. I am looking into water cooling, and I have a question about how the radiators and pumps are mounted. I was wondering how the radiators and pumps are mounted inside the case. In all of the pics and guides I have seen, it never explains how they were actually mounted. I was also wondering if...
Card's in my sig,bfg 6800 oc @ 360/705 with all vertex shaders unlocked. I'm still playing with the oc. I'm saving up money for a new rig,but I'm also waiting until all of the new technology such as dx10 and dual/quad core stabilizes a bit, there's so much stuff happening right now. This current...
Hi. I noticed today that if I insert a usb drive before I turn on the computer,windows will have issues detecting the drive unless I unplug and replug it in. I tested this on a few different computers,all with the same result-xp had trouble detecting the drive if I booted the computer with the...
Hi. Thanks for all of the replies,they really helped me gain a better understanding. Are there any books anyone would recommend to teach me about processor design that assume you don't know much from the start? The only book I have like this so far is Code.
Hi. How exactly was the IA-64 built from the ground up as 64 bit? What makes it native 64 bit,is it something in the physical processor like a register size? I plan to take computer architecture courses in college,the topic fascinates me. Also,are there any books that you would recommend I read...
Hi. I've been doing some research on how 64 bit works and I have a question. It seems to me that the IA-64 is the only 'true' 64 bit processor because x86-64 is just an extension of the 32bit instruction set and allows for 64bit wide integers,memory addresses,etc. My question is what makes the...
Hi. I just bought a 4gb flash drive for the purpose of putting games on. One of the games I have is a pre steam version of half life. I can't use steam because of network restrictions and space issues. I have no problem installing half life,but I can't run it as non-admin. The only way I can run...
Hi. I usually can find solutions to my problems after googling for a while,but this has me truly stumped. I have a U3 usb drive that I bought a few months ago,and it has been working fine. However,recently I have run into an odd problem. I added a limited user account and run under that normally...