I have a 3.5 year old Antec CP-1000 psu and using my rig for mining. The display will crash when I have 2 instances of cgminer running and I have tried everything to get it stable, driver versions, fresh install, swapping card slots. To lower power consumption tried 1 stick of memory, lowered...
I need to piggyback routers for a 5 story building based on 1 connection. I need to find a router with the best signal range and commercial use. Any ideas?
Basically if it has been running for a long time this happens:
1. Move the mouse and for a split second I see the screen before it goes blank.
2. At that moment a high pitch sound for about 1-2 seconds can be heard.
3. I am not sure it the comp is locked up or if I just cant see the...
Only reason I didn't go with SSD is I had left over raptor drives. Just a cost issue and for the price they are fast and have 1TB data drive for my music. The problem is I have now maxed out all my internal sata connections. I agree SSD is the future but for now price is high and I would say my...
Why no respect for the raptors? I thought I was close to SSD but nothing to see here. $50 a drive and legacy crap from my old machine. I think that is best bang for the buck except the elctric bill.
more pics of h50 coming spent forever getting that thing set. Basically a wind tunnel in antec bay and working pretty good. Got 2 fans in bay and it mounts just fine.
prime 95 torture test and other ones as well. It has been at this OC for a month and no probs I can run it tonight if you want screenshot.
BTW this wouldn't be possible without this mod that I made in previous post
http://hardforum.com/showthread.php?t=1567477
I am bad with mem tuning...
I have found many people run into high temps with the north bridge on these boards. Remove the pipe connected heatsinks and apply high end TIM. This is easy to do since they are just attached with screws/springs. I had to take everything out after I noticed temps around 90c overclocked and that...
I used up all the SATA II ports(1-6) and now I have my data drive that is SATA III but the marvell SATA III ports appear to require two disks in raid array in order to work. Has anyone been able to get the marvell ports to work with a single drive?
long story short it doesn't fit. The xpower audio card prevents the H50 being located on bottom rear fan. I mounted it to the front and used a sythe fan and it has direct air flow from the front. As you can see the hot air will hit my memory but don't think it will be bad. This is the only...
I think I am going with the above board and GTX260 in SLI. I don't see these causing a bottleneck at x8/x8 and I will save $200 by getting i5 750 and cheaper board vs 1366.
Ok so I have been looking at EVGA P55 SLI 132:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813188055
It says SLI + Physx buy since it is P55 I want to stay away from x8/x8 and wasn't sure if a physx card effect the lanes. I understand there isn't a big difference between x16 and x8...
The first:
PC-B25FWB - Has 2 front fans but not sure if the design will prevent airflow.
http://www.lian-li.com/v2/en/product/product06.php?pr_index=463&cl_index=1&sc_index=25&ss_index=62
PC-P50WB - Has one less front fan but more open...
I saw a previous post about some Evga boards only having x8 for a single card. I know this probably won't make a difference in performance but still would like it.
Helping a friend and not a ddr3 person. Does anyone see anything wrong here:
CPU-Z version 1.50
-------------------------
Processors Map
------------------------------------------------------------------------------------
Number of processors 1
Number of threads 2
Processor 0...
I find the campaign map can get laggy more so then the battles. I just got a GTX 260 running 720/1250 but my cpu is old opty so you should be better off. I have everything pretty much maxed and may need to turn down a few settings. Sea battles are the most resource intensive. Not to mention my...
I am use to DDR and OC with 1:1 to get what I want. i.e. mem 250/500 with opty 170 at 2.5 ghz 10x multi. With DDR2 is everything the same? I am going to get a Gigabyte UD3R board with Q6600 and 1066 mem. I assume I put the FSB to 533 and the multiplier to around 6 for 3.1GHZ. Tried to search but...
I am doing a budget build with Gigabyte EP45-UD3R and q6600. I dont want to go overboard with the video card. Even though I wont be using dx10 anytime soon not sure if an 8800GTS will be fine with 1600x1200 or if I should get a 4850/4870. I plan to keep it for years and my SLI 6800GS dont do...
I was happy with the old coolbits but now it wont work WTF? I can't see clock frequency settings in this new display. I tried rivatuner as well so what do I do?
Thanks
I used to have a much more detailed sig but it is gone for some reason so I included the basics. Like you mention I may go 1 GTS and see if that is good enough. Thx
With 3800+ I doubt anyone got over 3Ghz. With Opteron 170 I could get 2.8GHZ with good air cooling. With liquid I guess it is possible but I haven't been following much. BTW I run 1:1 at 250FSB to be stable and make sure I don't overheat anything if I get lazy cleaning my case screens for cooling.
I bought this thing since all PSU's are not created the same now I am not sure if I upgrade my SLI 6800GS to 8600GT's I will have problems? Does anyone know what I should cap it at or do I need a new PSU?
Is the new DX10 tech not there yet? I see nothing about pipelines so not sure and I am still running XP. Both cards cost about the same and I will be doing SLI. I know the answers are out here but I would rather see personal experience. Going through the benchmark thread is like pulling hair...
I have 2x 6800GS and I bench 11,300 in 3dmark05. I have seen some 3dmark scores and am not that impressed with the new tech. My score is high due to 2x10k rpm raptor drives in raid 0 but still if I am going to drop $400 I want to see near 20k in 3dmark05. I prefer SLI but will consider a single...
Did a search but came up empty. So if the last line of System Properties-->General Tab reads this:
processor 1500MHz
599MHz, 2.0 GB of RAM
Why is that? This is a Pentium M and I guess it may throttle down to save power but I dont see the same effect on a different laptop with mobile chip. I...
So the motherboard is not detecting my cpu (opteron 170). I have 24 pin, fdd and 8pin power plugged-in and 1 stick of memory and still nothing. Is this usually a bad processor? The PSU is a OCZ powerstream and it shows the voltage is fine. Any ideas or should I buy a $100 cpu to test it?
Get the evga 7800gt mobo combo and then spend the rest of the $650 on hd, case, ram and PSU.
http://www.newegg.com/Product/Product.asp?Item=N82E16814130238
This card/mobo .......$380
CPU x2 3800...........$325
http://www.newegg.com/Product/Product.asp?Item=N82E16819103562...
I was reading somewhere that with the new DFI UT SLI Extreme mobo could handle 4 dimms at t1 and overclocked speeds or it was the opteron cpu's. I think it was the new DFI mobo that made it possible and if so the get that and 7800gt. Then down the road and 2 more sticks. I could be wrong and I...
The Sliverstone one is the best but for looks I went with the thermaltake A2018. This does around 95cfm and has nice led. It has good reviews and appears to be solid and of course I bought 7 other 80mm of the smaller variety that do 72.5 cfm to make my case into a jet engine. BTW these...
Don't RMA it. Both steppings in this thread are solid and for the price it is worth more to sell assuming you got the OEM one. Wow the prices now are $465 for Opty 170 retail. 3 weeks ago I paid $100 less for OEM.
With laptops I imagine they put a minimal video card to control heat and use little power to save battery life. I am sure it will be fine for whatever you do as long as you are not playing any modern games on it.
It would be a shame not to OC the Opteron since they OC so well. Why not overclock it just a bit and you will still be plenty safe try 200mhz then 400mhz and keep an eye on the temps and don't touch the voltage. Just do 9x240 and throw in a divider if needed. I think the 165's only have 9x...