Recent content by Sathsayin

Read up on the internet about it. Thats the only advice i would share to give. I don't want to tell you something and you fry your stuff and feel like it was my fault.

the only thing i can think of is that the sata controller is on a chip that the overclock is pulling alot of amps through. might have too much voltage drop on the chip housing the sata controller. possibly bump the voltage up abit on the south bridge or northbridge to see if it goes away? could...

BUMP Did I Safely overclock this proccesor right? it is stable prime95 for 2 days. http://valid.x86.fr/69wrup

Thank you for your quick reply! These were my thoughts it was hard to explain in retrospect to the actual problem since everything is working. I'm glad you understood what I was trying to say. Sometimes it's hard for me to put information across. Im going to scrub down the connectors on the cpu...

yeah I know... but the board works great with 4 diffrent cpu's 95 watt and 65 watt no problems.. even overclocked the current e1400 to 3.1 ghz on default voltage. EVERYTHING works. zero problems in 9 months.. since the incident. That proccesor works great in another board? It boots at wrong...

I have a p43td/usb3 Asus motherboard. It was paired with some gskill ram and a q9550! Worked great for 3 years.. then had a friend spill a drink in it... Wouldnt boot thought everything was dead.. I eventually put a e1400 in it.. and it works flawlessly.. put q9550 in it... it's dead... So i...

Bump! Also wanted to add or rather clear up. I flashed latest bios. If I set bios to default the ram boots at 7.7.7.15 ddr3 400 or 800mhz.. At stock cpu speed no matter what i do I can't get it above 1000mhz no matter overclocking are not. Will not boot with default ram timings at ddr1600...

(I do not have ZILCH as in 10 dollars to upgrade so overclocking what i have) Guys for the life of me I do not understand what is going on... I set bootstrap to 200 mhz.. if left on auto are 266/333/400 it will not overclock past default speed. pcie is set to 100 mhz FSB is set to...

Alot of Devices that pull alot of power for a USB device will cause certain chipsets, on certain motherboards, to freeze at the point of "enabling USB devices". I have noticed them adherrent to Asus and Asrock more then any others. Don't take me wrong. I love Asus Gigabyte and Asrock more then...

It's been awhile but i was reading through an old webpage and the guy mentioned hitting it. Was wondering dang how nice would it be to clock my pc up 30 percent with one button again...

did you try updateing the firmware?

Hey was just wondering if any of you guys have made your own mosfet coolers.. i was thinking of takeing some pennys and sanding/grinding then lapping a smooth finsiht on both sides.. then taking a pair of plyers while haveing it in a vice to keep it flat and cutting four snips into each 90...

Not sure with an I7 but with a lga 775 this is how you do it with stock voltage and nothing oced enable manual oc in bios set pci spread spectrum to disable set psi to fixed set ce c2 to disable set any cpu throttleing to disable set cpu spread spectrum to disable set pcie bus to 100 (must do...

So I screwed up posting the budget which i went back to within 3 minutes and changed. He had checked it so fast that it was in between the time I had posted it. Kudos for responding so fast I understand he frequents this form all the time and I appreciate it. So therefore it was a...

Sometimes I wonder if the rom the the bios resides on goes bad kinda like those flash drives that get corrupt data on them are soemthing even though they've never been dropped etc. Was your system Overclocked from the getgo? What temps was your hardware showing? Seems to be a motherboard issue...