DAN A4-SFX: The smallest gaming case in the world

Bought one on amazon for like $30, not terrible. Plan on undervolting the cpu as much as I can but just hate noise. Might attach a noctua fan or something.
The C7 without any modifications is really loud (but performs quite well). I swapped the fan with the Noctua 14mm one and it works okay, still quite audible after gaming for a while though - I am still considering getting shorter motherboard stand-offs...
 
Last edited:
Hey guys,

I got my case and put everything inside. Pics are in the album.

I cut the i/o shield with my dremel to fit a noctua 40mm fan. The dynatron t318 exhausts to the i/o port amd the psu so hopefully that'll help a little. I was able to keep the fan in place with the display port plastic covers from my gpu and it fits perfectly.

I was able to route the psu power cord and pci cords through the front ofthe case to minimize tye cable foot print.

I haven't powered it up yet but I will keep you guys updated.

PICS and Deadpool!!!

https://imgur.com/a/1kSaW
Looking really nice! Thanks for the inspiration. How is the 40mm mounted? And the a9x14 - did I get the kit from noctua?
 
2qav5va.jpg

*_*
 
Looking really nice! Thanks for the inspiration. How is the 40mm mounted? And the a9x14 - did I get the kit from noctua?

lnV2xfO.jpg


I used a mini dusplay port plastic cover found on the back of my video card and wedged that between the fan and the lan connectors so it wouldn't move. I then placed a regular display port cover on the top so it wouldn't wiggle back and forth. It's a perfect fit with no wiggle and I can easily remove them to remove the fan.

Pics for exposure
ZXHpR5K.jpg

aDj7zSI.jpg

jaeo6u8.jpg

4BNZGcb.jpg

CNeg9cY.jpg


Hope the rest of you guys enjoy the pics.
 
I'm not sure how much longer I can wait :/ my laptop is going to give out any day now....

On a separate note, The sf450 psu seemed to be the minimum choice with the 1080, which draws 180w.
The 1080ti is 250w, does that eliminate the sf450 from the equation?
Other components are Standard 7700k, 960 evolution m.2, 32gb ram etc etc

450W is unsafe for a 1080Ti. From all the reviews I've seen, system wattage goes around 400w on full load for the Founder's Edition. If your PSU is old, it might have lost some capacity. It's a tight fit, not a risk I'd be comfortable with.
 
I'm using 3 HDDs (2 in cage and one in front mount) with SF450. If you are going with 2 drives only it is better to split them, but if using 3 is doable.
I'm impressed then that you were able to bend the PSU wires to actually connect to the HDDs in the cage. They're right-angle connectors and they're in the wrong direction (and too stiff) so despite my best efforts I wasn't able to make it work that way.
 
just 10 mins should do.

if you add the results to HERE it will help others in finding which is the best cooler for their cpu.

cheers

Well, I built the computer and brought it to my girlfriends place and I forgot to bring a power cord. It'll have to wait till Monday.
 
I'm impressed then that you were able to bend the PSU wires to actually connect to the HDDs in the cage. They're right-angle connectors and they're in the wrong direction (and too stiff) so despite my best efforts I wasn't able to make it work that way.
I had the same issue.
I struggle for about two hours, and just managed to squeeze all the cables.
It's not easy, but it is doable.
I used default SF600 cables, but having custom sleeving cable will be much easier.
 
Yeah, but unfortunately there's no word of when it will be released. Hopefully AM4 itx boards will start to get released in just a few weeks. But I want one now! :-(

After game tests and also answer from Gigabyte in Sweden that Mitx comes to summer time i dont have the patience to wait.
 
I'm waiting until Intel coffeelake comes out to build my Dan A4. I hope that the AMS 1600X delivers better for gaming.
 
450W is unsafe for a 1080Ti. From all the reviews I've seen, system wattage goes around 400w on full load for the Founder's Edition. If your PSU is old, it might have lost some capacity. It's a tight fit, not a risk I'd be comfortable with.

Sf450has Ben tested here and showed to be able to go 500w no prob. High quality Japanese caps. You can run a Titan x with 7700k no prob.
 
Hello guys,
By now, we have 111 submitted results: https://do cs.google.com/spreadsheets/d/1aZfTysWc4dtJC33qkLCjLkhPnzVLtbCtjpxoZeT92ZA/edit#gid=0
I just wanted to thank you for your participation.

After all that testing I am curious at which setting you let your CPU run. Here is my setup:
i5-3570k @ 4300 Mhz / NH-L9i @ max 1900rpm (15°C below Tjmax)
 
  • Like
Reactions: Jspr
like this
You guys think the Dan case will run just fine with the new AMD chips and cards? Or to hot

I think the CPU and GPU don't have a Problem with this. I am just curious if isolating the PSU with e.g. foam would help to keep it cool and quiet
 
!!! I cannot for the life of me decide which one to get. Cryorig C7 or Noctua LH-L9I!!!
The TLDR for this forum has been that the Noctua is a lot quieter, but Cryorig looks more aesthetic/better color (at least in my opinion) and cheaper.

Can you guys please help me decide, because for the love of god, I personally can't. Cheers.

(Note, I have a i5-6600)
 
Last edited:
Hello guys,
By now, we have 111 submitted results: https://do cs.google.com/spreadsheets/d/1aZfTysWc4dtJC33qkLCjLkhPnzVLtbCtjpxoZeT92ZA/edit#gid=0
I just wanted to thank you for your participation.

After all that testing I am curious at which setting you let your CPU run. Here is my setup:
i5-3570k @ 4300 Mhz / NH-L9i @ max 1900rpm (15°C below Tjmax)

fix the link i can't even handle seeing this anymore
 
Don't buy the C7. It's stupidly loud.

LP53+NF-A9x14 has the best performence
NH-L9i is slightly worse but the setup is far cleaner.
If you don't want to invest that 'much' money, use the boxed cooler. That one will do the job for now.
 
Last edited:
Has anyone extrapolated out the expected dimensions of the EVGA 1080 Ti FTW3 card to see if it should fit in the case?
 
fix the link i can't even handle seeing this anymore
It is the only way we can actually copy the link, bookmark etc. If it is full link, then you would we the tables etc. and you wouldn't be able to open it outside of [H] nor copy link or anythinf.
 
I got some pretty good results with my nexus low, modified fan, and motherboard heatsinks. I put the data in the spreadsheet.

https://goo.gl/photos/EqeLsskUiFC1B7HaA

Edit: Not shown in the pictures... I used the backplate from my Noctua NH-C12P, with some longer M3 bolts from home depot. The stock Nexus heatsink mounting brackets leave a lot to be desired.. To even mount it to my motheboard with all the stock hardware, my motherboard would have been flexing severely. The backplate and longer screws cured that issue.
 
Last edited:
M.2 is 32gb 4x.

how many more sata do you need?

That board in the picture is the x370GTN, which supports full 32Gbps, i think Eingang may be confused as to which chipset the motherboard in the picture is, i think he mistook it for the B350GTN

just in case anyone may make the mistake of buying the B350 chipset board, it only supports 16 gigabits max. if you want to use a very very fast m.2, go for the x370GTN board.

There are 8 bits in a byte.

so 32 gigabits is 4 gigabytes per second theoretical speed limit for m.2s

16 gigabits would only be 2 gigabytes per second, so m.2 ssd's like the 950 pro or 960 pro/evo could never hit their true speeds because they run at 2.5 gigabytes per second or higher. they simply don't have enough pci-e lanes to utilize to reach their true potential speeds on the B350GTN version of that board.
 
Last edited:
https://gfycat.com/SingleSpottedAracari

I got the Corsair lighting kit, and honestly, I think it was worth the extra. I can set the lights to correspond to any temperature sensor (even my 960 evo), which was actually useful when testing. The lighting strips are the same length as the actual case, and the box is super tiny.

I am definitely going to switch to the SFX (non
-L) Corsair PSU. There is no room underneath.

Edit:. Should I not post this here? I can't remember
 
Last edited:
https://gfycat.com/SingleSpottedAracari

I got the Corsair lighting kit, and honestly, I think it was worth the extra. I can set the lights to correspond to any temperature sensor (even my 960 evo), which was actually useful when testing. The lighting strips are the same length as the actual case, and the box is super tiny.

I am definitely going to switch to the SFX (non
-L) Corsair PSU. There is no room underneath.

Edit:. Should I not post this here? I can't remember

I was planning to do asus aura setup with the z270...but it only syncs with the cpu temperature. The other sensor temps are grabbed by the corsair application?
 
Well, I built the computer and brought it to my girlfriends place and I forgot to bring a power cord. It'll have to wait till Monday.

Check the TV, or any other device she has connected to the TV. Maybe she has a music system? Check all the things!
 
https://gfycat.com/SingleSpottedAracari

I got the Corsair lighting kit, and honestly, I think it was worth the extra. I can set the lights to correspond to any temperature sensor (even my 960 evo), which was actually useful when testing. The lighting strips are the same length as the actual case, and the box is super tiny.

I am definitely going to switch to the SFX (non
-L) Corsair PSU. There is no room underneath.

Edit:. Should I not post this here? I can't remember

Also did you only buy the 14.99 light kit? Thanks
 
Back
Top