Silverstone SST-FT03-Mini (Mini-Itx)

Whilst we're on the subject of suitable graphics cards what about this?
http://www.evga.com/Products/Product.aspx?pn=02G-P4-2643-KR

actually that one should be just fine. while it's not closed on the back end like all the blower-style cards recommended, it is much lower power than what this case can handle. even though youre exhausting about half the GPU heat back into the case instead of out the back, the 140mm fan in the bottom should still be more than enough to take care of that small amount of heat.
 
terrible. i highly recommend against that card in this case. :) same with the one you linked as well.

Understood, evga 660ti or 670 it is.

Just looking at my other options given the nvidia cards are an extra $100 for the same performance.

Paul
 
Understood, evga 660ti or 670 it is.

Just looking at my other options given the nvidia cards are an extra $100 for the same performance.

Paul

well theres a diamond 7870 that looks to be a closed-shroud blower type. there are also quite a few 7970s if thats in your budget. the price differences dont seem to be that much to me though, maybe more like $40-70 or so.
 
actually has anyone tried this 7870? the holes on the end are pretty small so it might put like 80% of heat out the pci slot and 20% into the case or something, which might be acceptable.
 
actually has anyone tried this 7870? the holes on the end are pretty small so it might put like 80% of heat out the pci slot and 20% into the case or something, which might be acceptable.

It's too long :(

That's the hard bit, combining cooler type plus length..harder again if you don't live in the USA where certain brands aren't available.

Paul
 
terrible. i highly recommend against that card in this case. :) same with the one you linked as well.

Yeah, the shroud needs to be airtight so that all heated air is vented through the back plate only.#

Has anyone tried one of these?
http://www.asetek.com/desktop/gpu-a-combo-coolers/760gc.html
There are some positive reviews about (google) + they allow use of cards with any cooler style, and may potentially reduce the length of cards if some of the cooler can be removed.
Its not immediately suitable for ATI cards OOB, but I think you can get adapter plates for ATI mounting.
 
Last edited:
Whats everyones thoughts on how this GPU would cool in this case?
Paul

http://www.hisdigital.com/un/product2-699.shtml

or any of the sapphire 7850's? look to be more "closed" http://www.sapphiretech.com/presentation/product/?cid=1&gid=3&sgid=1160&pid=1672&psn=&lid=1&leg=0

Most everyone here will tell you "NO."

I spoke to Jose from Asus (in person at the Engadget Expand conference) about this case and he says the reason why it's not stressed in the manual or on the box is because you have increased cooling efficiency with an impeller design so you get less heat radiating from the card and more heat circulating. Basically, he said there would be little or no difference. He also said he has discussed this in length with Tony from Silverstone and they both concur.

Those here will tell you that the walled off space of the video card receives little fresh air due to air taking the path of least resistance through the case. The GPU would just be circulating it's own air, building up it's own heat and also spewing heat throughout the rest of the case. This will cause fans to work harder and everything will be hotter/louder/potentially unstable OC of GPU.

I've only tested this case with an impeller card and have personally endured the nasty build up of heat. I ripped off the impeller and just stuck a blower fan in it's place and achieved about 5% improvement (I made that number up, it was maybe an itzy bit better). That being said, my card had no shroud on it and I simply changed the flow from down/out to out/out from the fan.

I'm somewhat inclined to believe real world observations rather than expert opinion. Unfortunately, there are so few cards with the reference cooler design and if you're running 1440p, the GTX 670 is one of the very very few (pretty much only) option. At 1080p, get yourself a 660 or 660 Ti. Nvidia drivers are lightyears better than ATI's anyways (opinion).



While we're on this topic, lets say I cut a hole in my case. Will this work similar to the recommended cooler design? http://www.newegg.com/Product/Produ...ion-_-cables-_-na-_-na&Item=14-131-478&cm_sp=
 
Last edited:
While we're on this topic, lets say I cut a hole in my case. Will this work similar to the recommended cooler design? http://www.newegg.com/Product/Produ...ion-_-cables-_-na-_-na&Item=14-131-478&cm_sp=

I was thinking the same thing actually - make some fine holes in the side of the case where the fan intake is and use some foam tape to build it up so the GPU fan only takes in fresh air.

However for ease Ill cop it on the chin and go an evga gtx670...Palit and gainward used to make some with the reference cooler but they have disappeared from stock in Australia over the past week.
Paul
 
I was thinking the same thing actually - make some fine holes in the side of the case where the fan intake is and use some foam tape to build it up so the GPU fan only takes in fresh air.

However for ease Ill cop it on the chin and go an evga gtx670...Palit and gainward used to make some with the reference cooler but they have disappeared from stock in Australia over the past week.
Paul

I actually meant cut a hole in the bottom of the case since the card is ~1.5" over length for the case. I believe 10.3" is max and that card is I think 11.8". The shroud is all closed except for the two ends. Air would spew out the bottom and top of the case...
 
Understood - may need some tape to seal off the other areas that air can escape around the shroud to make it work; that said the hot air that escapes out the bottom will come straight back in through the 140mm fan wouldnt it?
 
I spoke to Jose from Asus (in person at the Engadget Expand conference) about this case and he says the reason why it's not stressed in the manual or on the box is because you have increased cooling efficiency with an impeller design so you get less heat radiating from the card and more heat circulating. Basically, he said there would be little or no difference. He also said he has discussed this in length with Tony from Silverstone and they both concur.

Those here will tell you that the walled off space of the video card receives little fresh air due to air taking the path of least resistance through the case. The GPU would just be circulating it's own air, building up it's own heat and also spewing heat throughout the rest of the case. This will cause fans to work harder and everything will be hotter/louder/potentially unstable OC of GPU.

I've only tested this case with an impeller card and have personally endured the nasty build up of heat. I ripped off the impeller and just stuck a blower fan in it's place and achieved about 5% improvement (I made that number up, it was maybe an itzy bit better). That being said, my card had no shroud on it and I simply changed the flow from down/out to out/out from the fan.

I'm somewhat inclined to believe real world observations rather than expert opinion.

Wait, you're talking about "impeller" and "blower", but this isn't the issue. It's whether the shroud is closed or not. What a closed shroud does is separate the air intake to be 20cm away from the exhaust. Nothing to do with "increased cooling efficiency" whatever that's supposed to mean. So it's not clear if you spoke only about fan types to Jose of Asus? or also about the shroud?

Real world observation recently in this thread:
Finally, I lost against my MSI GTX560ti Hawk graphics card and replaced it by a EVGA GTX 660 Superclocked. The direct heat exhaust works much better.
 
Wait, you're talking about "impeller" and "blower", but this isn't the issue. It's whether the shroud is closed or not. What a closed shroud does is separate the air intake to be 20cm away from the exhaust. Nothing to do with "increased cooling efficiency" whatever that's supposed to mean. So it's not clear if you spoke only about fan types to Jose of Asus? or also about the shroud?

Real world observation recently in this thread:


Yeah I was talking to him about the shroud but he was saying that it's a non-issue. He spent much more time trying to convince me that impeller fans are far superior. Also a lot about heat radiation rather than circulation. Radiation from the back of the card...I honestly lost interest about that prat of the discussion because I'm not sure we were on the same page. Given all I've read here, nothing he said was remotely what I had learned.

I'm just angry at myself for not picking up a GTX 670 for $280 at the beginning of the year. I don't wanna disassemble my case to cut a damn hole. I don't understand why the 670 keeps going UP in price. Didn't they just announce some new mumbo jumbo?! :(
 
I've never considered heat from the back of the card in the FT03-mini or SG05/06 because the main fan runs right past it. I supposed it could be a factor if you air cool the CPU :)
 
What if I tape off the shroud on this card?
http://www.tigerdirect.com/applicat...ffiliateID=lw9MynSeamY-8xxxdFA5RtfrWZhD7IP9CA

You think it would be too restrictive to only allow air out the top?

that card is open on top and bottom right? it looks like it's open on top where the red stripe is but it's hard to tell from those photos. anyway i would highly recommend against it. i cant say for sure, but since those fans suck air in through the two fan holes in the shroud, and blow it through the card and out the top, bottom, and pci slot, if you blocked off the top and bottom then most of the hot air will be trapped in the card with nowhere to go. anything to the right of the first fan will be trapped, with only the air blown to the left of the first fan able to escape out the pci slot. you will probably overheat the card very fast.
 
What if I tape off the shroud on this card?

That's not going to work well. As Ekuest says, that heatsink and fans are designed to push air out the bottom and top, closing it off won't make it work like a design which forces the air along the length of the card.

As I understand it from your previous posts, you don't want an EVGA 660 Ti because you feel it doesn't have the price/performance compared to a 7870 or 7950. Is that right?
 
As I understand it from your previous posts, you don't want an EVGA 660 Ti because you feel it doesn't have the price/performance compared to a 7870 or 7950. Is that right?

I believe the 660 and Tahiti 7870 are the absolute best deals currently. If I had a 1080p monitor I'd pick up a Tahiti 7870 for $180 and never ever think twice while gaming for years with minimal problems (ATI drivers suck).

Unfortunately I'm at 1440p and I read a general recommendations (various places) of GTX670 or 7950. Some stuff about low memory bandwidth of the 660 may be limiting in the future for high resolution. Other stuff about how supposedly even a GTX680 can barely run 1440p at max settings...

So I'm not looking for max everything. I don't care for AA but I do like some AF. I'm however worried about future games if these cards can barely run today's games at 1440p.

I've been scared into a 670 or 7950. Unfortunately there is no 7950 that will fit without chopping the case let alone only one with a qualified cooler shroud. The 670 is about $75 overpriced in my opinion, but I would settle for a final shipped price of $300 or less with a game I could sell on ebay. Unfortunately that simply doesn't exist and for some ridONKulous reason the 670 keeps going up in price. I would get the Tahiti 7870 and OC, but they're all too long and have unqualified coolers.
 
Unfortunately I'm at 1440p and I read a general recommendations (various places) of GTX670 or 7950. Some stuff about low memory bandwidth of the 660 may be limiting in the future for high resolution. Other stuff about how supposedly even a GTX680 can barely run 1440p at max settings...

Sounds like forum trash talk, any sources?

So I'm not looking for max everything. I don't care for AA but I do like some AF.

Well since AA is something that costs a lot to calculate, then turning it down can improve frame rates significantly.

Which games are you playing? Perhaps we can look for some reviews and tests.
 
Sounds like forum trash talk, any sources?

Well since AA is something that costs a lot to calculate, then turning it down can improve frame rates significantly.

Which games are you playing? Perhaps we can look for some reviews and tests.

Oh it is definitely forum trash talk. But there is a LOT of it. Specifically, the 1440p "clubs."

My current 'to be played' list:
AC3
Arkham City
Crysis 3
Dishonored
Hitman Absolution
Tomb Raider
Borderlands 2
Max Payne 3

They've kinda built up since I haven't had a complete system for the past seven months. These games should do fine at 1440p on a 660Ti. My last card was an 8800GTS and that lasted me six years. It wasn't until year 4 that I felt a struggle, and by year 6 I was impressed it could play Mass Effect 2, 3 at the just barely playable 20fps. I'm hopefully not looking for another 6 years though...

I thought the jump to 1440p would have little impact, as over the years it seemed pixels didn't matter as much as other things, but I was wrong. What I want is 670 performance at $280. The Tahiti 7870 'would' be perfect. If I don't find it in the next month or two, I'll likely settle for a 660Ti.

I believe this review is quite comprehensive although I'm not too confident about the source:
http://www.rwlabs.com/article.php?cat=&id=760&pagenumber=7


Update:
This is just a stupidly good deal: http://slickdeals.net/permadeal/921...rd-bioshock-infinite-crysis-3-pc-game-coupons
So sad...can I tape THIS off!?
 
Last edited:
Does anyone know if there's a place to order the BeQuiet 350W PSU in US (or at least NA)? The noise of the ST45SF-G is starting to annoy me, and while I know the non-G is supposed to be quieter, I have doubts on just how much quieter it is, so I'd like to try the BeQuiet, but can't seem to find it anywhere.

I guess I could order it from a EU retailer, but in addition to shipping costs I also won't be able to easily return it if I decide I don't like it - I'm also pondering going with an ATX PSU, though I'd have to relocate my 3.5" HDD which currently is sitting right between the H60 radiator and "right" edge of the case.

There's also the SeaSonic SS-300SFD and SS-350SFE - does anyone have any experience with them, particularly in terms of noise? My system is fairly low-powered (i3 3225, no dGPU) so the power requirements aren't high, so noise is primary concern. The 350W SFE version has a 60mm fan so I'm assuming it's probably not suitable? The SFD might be OK, though I would prefer a little more headroom so I could add a mid-range dGPU later if I wanted to, hence looking at the BeQuiet.
 
Last edited:
Looking to upgrade from the stock Intel cooler, what all in one water cooler is recomended out of either the Antec Kuhler 620 or the Corsair H55?
Going to be using the 140mm bottom fan as well as a 120mm on top of the radiator for push/pull.

I have the Z77N WiFi, i5 3570K and a EVGA 660.
 
Either one is fine. The Kuhler 620 will get you better temps, but at a higher fan speed, so pick the H55 if noise is a concern.
 
Can anyone verify if a 9.5mm slot drive will work, or does is have to be the 12.7mm size?

thanks in advance
 
I currently have my PSU fan towards the CPU socket, is there any issues with having the PSU fan facing the side panel? I have the ST45SF.
I'm thinking of swapping mine to neaten up my cables a bit better.
 
I currently have my PSU fan towards the CPU socket, is there any issues with having the PSU fan facing the side panel? I have the ST45SF.
I'm thinking of swapping mine to neaten up my cables a bit better.

I've flipped mine every which way and found that it makes no difference. I prefer to leave the PSU fan facing my CPU because I'm probably the only one here with a air CPU cooler and it's fan moves more air into the PSU than the stupid PSU fan.

I wan't to say it's just slightly more quiet with the fan towards the CPU but I'm probably imagining things...
 
I've just picked up a motherboard & CPU for this case, but haven't yet picked up a PSU. I see several SFX choices on Newegg, and of course the two Silverstone options.

My question: is the non-modular Silverstone SFX PSU the best choice for this case? I'd prefer the modular PSU to keep cable clutter to a minimum, but I believe the modular PSU blocks the hard drive cage?
 
I've just picked up a motherboard & CPU for this case, but haven't yet picked up a PSU. I see several SFX choices on Newegg, and of course the two Silverstone options.

My question: is the non-modular Silverstone SFX PSU the best choice for this case? I'd prefer the modular PSU to keep cable clutter to a minimum, but I believe the modular PSU blocks the hard drive cage?

You are correct. The modular version's plugs will just out from the case and further restrict access to the drive bay area. I'm not sure if it will block it all together, but you're likely only saving one wire with the modular version unless you plan on making your own cables. Also, the Gold version has been known to have a noticeably louder fan than the standard version. I'm not sure if Silverstone has remedied this problem yet. If you're not building a high powered system, the Seasonic SFX's are a good option as well.

If you don't absolutely need a CD/DVD drive, I would advise discarding the drive bay and go the closed loop liquid cooler + fanless ATX PSU route. You can likely fit a 3.5" HDD on the wall opposite the GPU if you need. I have an all air cooled system with the damn Silverstone SFX crap and I HUGELY regret not going the water + ATX route. Four months after my build I'm still annoyed by the noise from the stupid PSU. WARNING: The ST45SF is NOT silent AT ALL. The standard version at least also runs very hot.

That being said, if anyone wants to buy my Big Shuriken 2 CPU cooler + ST45SF, $100. CPU cooler has upgraded CM Blademaster 120 fan on it too.
 
You are correct. The modular version's plugs will just out from the case and further restrict access to the drive bay area. I'm not sure if it will block it all together, but you're likely only saving one wire with the modular version unless you plan on making your own cables. Also, the Gold version has been known to have a noticeably louder fan than the standard version. I'm not sure if Silverstone has remedied this problem yet. If you're not building a high powered system, the Seasonic SFX's are a good option as well.

If you don't absolutely need a CD/DVD drive, I would advise discarding the drive bay and go the closed loop liquid cooler + fanless ATX PSU route. You can likely fit a 3.5" HDD on the wall opposite the GPU if you need. I have an all air cooled system with the damn Silverstone SFX crap and I HUGELY regret not going the water + ATX route. Four months after my build I'm still annoyed by the noise from the stupid PSU. WARNING: The ST45SF is NOT silent AT ALL. The standard version at least also runs very hot.

That being said, if anyone wants to buy my Big Shuriken 2 CPU cooler + ST45SF, $100. CPU cooler has upgraded CM Blademaster 120 fan on it too.

That's kind of my issue - I'd prefer to make my own cables so I can route them properly and make everything much neater. Mostly because I'm a little OCD and I enjoy the tinkering.

Ideally I'd like to keep the drive cage, as I run a 3.5" drive for storage along with an SSD for the main OS/Apps, and also the optical for the rare occasion I use it. Plus, it seems if you go for the ATX PSU router, don't you have to mod the case?

So from what I gather, if there was a quiet(er) SFX PSU, you'd feel that was a decent alternative to the water cooler & ATX PSU?
 
That's kind of my issue - I'd prefer to make my own cables so I can route them properly and make everything much neater. Mostly because I'm a little OCD and I enjoy the tinkering.

Ideally I'd like to keep the drive cage, as I run a 3.5" drive for storage along with an SSD for the main OS/Apps, and also the optical for the rare occasion I use it. Plus, it seems if you go for the ATX PSU router, don't you have to mod the case?

So from what I gather, if there was a quiet(er) SFX PSU, you'd feel that was a decent alternative to the water cooler & ATX PSU?

Well I don't know if the Seasonic SFX's are silent/better, but I do know that I'm NOT satisfied with the Silverstone SFX. Not only is the fan way louder than it's rated 16db, it makes noises when I move my mouse and Silverstone doesn't know why (it's not the recent diode update because I have that). I think Seasonic makes some of the best PSU's out there so I would trust them a little more. The problem is that no other SFX PSU gives you 450w. Max is 350w and there is only one. So Silverstone has done quite a feat cramming 450w in an SFX. 350w is the absolute bare minimum for a high power system so you don't want to cut short on that...

I totally understand your concern for wanting a 3.5". That was my very reason for getting an SFX PSU also. Now that I know this case well, I ENORMOUSLY regret my decisions. To the point where I almost want to sell my system and start over (same case though).

To fit a full size ATX PSU in there, you simply bend one tiny metal tab and you must use a liquid cooler for your CPU because there will be little space between the PSU/Motherboard. The tab that you bend back is meant to be an aligning tab for the SFX PSU to make mounting easier. It serves no other purpose. Also, you won't be using all the pre-drilled mounting holes on the ATX PSU. You can just put some screws through the mesh guard itself and it will work just as well.

I haven't had a disk drive for years and when I do need one (once a year maybe), it's no biggie to hop to someone else's computer to copy it to a flash drive. I highly advise you to forego the cost of the stupid expensive/slow slim drives and put it towards something else.

Please please don't make my mistakes. Take some time, make some measurements. I'm almost certain a 3.5" will fit in there with an ATX PSU, 10" GPU, and standard CLC liquid block with ONLY the case fan below the case. The SSD will fit in it's bay under the MoBo no issues no matter what you do. You'll have to get crafty with the 3.5" mounting mechanism, but that's where your tinkering comes in handy. Otherwise, zero case mods.

Making your own wires is great fun, but the end result makes little difference other than your piece of mind and aesthetics. I now know that the benefits of having a setup with a FANLESS PSU and swapping out the case fan for a PWM Rosewill Hyperborea 140mm to be used with the Asus MoBo are more than marginal. Absolute minimum amount of noise possible from this case, little or no increased noise under load, far superior O/Cability, you will not stress the PSU at all so it'll run more efficiently/less heat. Best of all, the ability to say you've worked your case to it's absolute maximum and taken FULL advantage of any/ALL space inside. Use your tinkering skills in advance. Go play with wires on something else and don't sacrifice what may be your most precious item. If you still want the SFX crap and need the power, the ST45SF NON-gold is your best bet. The wires are short and tuck well. Don't spend a penny more than you have to on this PSU and it definitely does not deserve custom cables. I picked mine up for $63 shipped from a random website five months ago.


Oh yeah, so I said I had gotten a 660Ti Superclock, but apparently I ordered the 660 Superclock by accident. I'll be rejecting that delivery and I just ordered an EVGA 670 FTW for $330 final price. Way more than I wanted to spend, but I also just made a cool dime on Tesla today... http://slickdeals.net/f/5941414-EVGA-GeForce-GTX-670-FTW-2-GB-349-99-shipping-AR?
 
Last edited:
Well I don't know if the Seasonic SFX's are silent/better, but I do know that I'm NOT satisfied with the Silverstone SFX. Not only is the fan way louder than it's rated 16db, it makes noises when I move my mouse and Silverstone doesn't know why (it's not the recent diode update because I have that). I think Seasonic makes some of the best PSU's out there so I would trust them a little more. The problem is that no other SFX PSU gives you 450w. Max is 350w and there is only one. So Silverstone has done quite a feat cramming 450w in an SFX. 350w is the absolute bare minimum for a high power system so you don't want to cut short on that...

I totally understand your concern for wanting a 3.5". That was my very reason for getting an SFX PSU also. Now that I know this case well, I ENORMOUSLY regret my decisions. To the point where I almost want to sell my system and start over (same case though).

To fit a full size ATX PSU in there, you simply bend one tiny metal tab and you must use a liquid cooler for your CPU because there will be little space between the PSU/Motherboard. The tab that you bend back is meant to be an aligning tab for the SFX PSU to make mounting easier. It serves no other purpose. Also, you won't be using all the pre-drilled mounting holes on the ATX PSU. You can just put some screws through the mesh guard itself and it will work just as well.

I haven't had a disk drive for years and when I do need one (once a year maybe), it's no biggie to hop to someone else's computer to copy it to a flash drive. I highly advise you to forego the cost of the stupid expensive/slow slim drives and put it towards something else.

Please please don't make my mistakes. Take some time, make some measurements. I'm almost certain a 3.5" will fit in there with an ATX PSU, 10" GPU, and standard CLC liquid block with ONLY the case fan below the case. The SSD will fit in it's bay under the MoBo no issues no matter what you do. You'll have to get crafty with the 3.5" mounting mechanism, but that's where your tinkering comes in handy. Otherwise, zero case mods.

Making your own wires is great fun, but the end result makes little difference other than your piece of mind and aesthetics. I now know that the benefits of having a setup with a FANLESS PSU and swapping out the case fan for a PWM Rosewill Hyperborea 150mm to be used with the Asus MoBo are more than marginal. Absolute minimum amount of noise possible from this case, little or no increased noise under load, far superior O/Cability, you will not stress the PSU at all so it'll run more efficiently/less heat. Best of all, the ability to say you've worked your case to it's absolute maximum and taken FULL advantage of any/ALL space inside. Use your tinkering skills in advance. Go play with wires on something else and don't sacrifice what may be your most precious item. If you still want the SFX crap and need the power, the ST45SF NON-gold is your best bet. The wires are short and tuck well. Don't spend a penny more than you have to on this PSU and it definitely does not deserve custom cables. I picked mine up for $63 shipped from a random website five months ago.


Oh yeah, so I said I had gotten a 660Ti Superclock, but apparently I ordered the 660 Superclock by accident. I'll be rejecting that delivery and I just ordered an EVGA 670 FTW for $330 final price. Way more than I wanted to spend, but I also just made a cool dime on Tesla today... http://slickdeals.net/f/5941414-EVGA-GeForce-GTX-670-FTW-2-GB-349-99-shipping-AR?

Thank you for all that information - really makes happy I held off on buying anything for the moment.

The motherboard I picked up has an mSATA slot on the underside. I plan to use that for my SSD, so I don't need a 2.5" SSD. I could always use my file server for storage and not have a local HDD. But, it seems like a case that's made for all that gear really should be able to handle it all AND a proper PSU. I guess if I wanted something simple and easy I'd buy a Dell :)

Couple questions:

The PSU you have/had and regret getting is the modular/gold Silverstone SFX PSU? Or did you pick up the regular bronze/non-modular Silverstone SFX? I saw a post a couple pages back about another SFX that is supposed to be quieter.

How do you like the case? Would you still buy it again? I'm seeing the posts on the front of this sub-forum about the NCASE M1, that looks like a really nice system as well. Might wait and see how that turns out.
 
Ideally I'd like to keep the drive cage, as I run a 3.5" drive for storage along with an SSD for the main OS/Apps, and also the optical for the rare occasion I use it.

Why not go for a 2.5" laptop drive for storage? Ok, 1TB is the maximum, not huge, but it can fit nicely in the SSD location under the MB and the SSD can be put in almost anywhere... I initially planned to do this (and then I realized I prefer to put my data on a nice storage system with some redundancy so I'm setting up a self-build NAS).
 
Thank you for all that information - really makes happy I held off on buying anything for the moment.

The motherboard I picked up has an mSATA slot on the underside. I plan to use that for my SSD, so I don't need a 2.5" SSD. I could always use my file server for storage and not have a local HDD. But, it seems like a case that's made for all that gear really should be able to handle it all AND a proper PSU. I guess if I wanted something simple and easy I'd buy a Dell :)

Couple questions:

The PSU you have/had and regret getting is the modular/gold Silverstone SFX PSU? Or did you pick up the regular bronze/non-modular Silverstone SFX? I saw a post a couple pages back about another SFX that is supposed to be quieter.

How do you like the case? Would you still buy it again? I'm seeing the posts on the front of this sub-forum about the NCASE M1, that looks like a really nice system as well. Might wait and see how that turns out.


Funny you say mSATA, I actually just put together a tiny 4" Intel NUC thing for my mom. Which is AWESOME. Check my video here to see if interested: http://www.youtube.com/watch?v=1ljkRkUT-kE

Oh yeah, that Intel thing only takes an mSATA. Even if your mobo has a slot for an mSATA, there's really no point to use it if you've got SATA III also. Pick your self up a Samsung 830 series 256gb for around $175 (not the 840). It's easily one of the best SSD's and an extremely good value. mSATA is just restricted which means more expensive and slower speeds.

As for the case, I absolutely love the thing. I cannot describe the joy I feel every time I look at it or push it's button to turn it on. Few issues I have with it (nothing is perfect). I wish it didn't have that stupid slit for a disk drive, and the top panel is crap plastic and mine is warped. I had them send me a new one but that one is all scratched up...go figure. Also, I find that my USB 3.0 case ports do not in fact operate in USB 3.0 mode. They're supposed to be sending me a new wire harness, but haven't gotten it yet.

The NCASE looks nice, but it's got those holes all over it. I've built many systems, albeit none terribly extreme, but still. This is now maybe the 5th computer I've built myself and I'm tired of the stupid lights, the ugly bezels, the nasty holes, the worthless doors, and all the other crap. In my opinion, this Silverstone case is easily the prettiest usable case I've ever seen. Usable meaning not ridiculous or requiring too much component sacrifice.

Oh yeah, the biggest problem I have with this case is that it's about 1" too short!!! Which means you gotta get a video card that's less than about 10.2" long, which almost requires you to get an Nvidia card, which is not particularly ripe in this generation of GPU's...this is a very specific problem and some have solved it by just taking a hack saw to the bottom of the case and allowing the card to just out the bottom an inch. A non-issue if you won't be doing much gaming or 3D work

Edit:
jospoortvliet also makes a good point and rebuttals his good point with another good point as well. Laptop drives are okay, but that's a sacrifice. My opinion is that It's a desktop, I'm gonna use proper desktop components or something equivalent/external with the same reliability/performance. Laptop stuff just gets in the 'restricted' category with limitations/higher prices.

Oh and yeah I have the standard ST45SF. The 80Plus Bronze or whatever the standard non-modular one is. It sucks, but it's the only real option for air cooler + high power system.
 
Last edited:
Back
Top