Whilst we're on the subject of suitable graphics cards what about this?
http://www.evga.com/Products/Product.aspx?pn=02G-P4-2643-KR
http://www.evga.com/Products/Product.aspx?pn=02G-P4-2643-KR
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Whilst we're on the subject of suitable graphics cards what about this?
http://www.evga.com/Products/Product.aspx?pn=02G-P4-2643-KR
terrible. i highly recommend against that card in this case.same with the one you linked as well.
Understood, evga 660ti or 670 it is.
Just looking at my other options given the nvidia cards are an extra $100 for the same performance.
Paul
actually has anyone tried this 7870? the holes on the end are pretty small so it might put like 80% of heat out the pci slot and 20% into the case or something, which might be acceptable.
terrible. i highly recommend against that card in this case.same with the one you linked as well.
Has anyone tried one of these? http://www.asetek.com/desktop/gpu-a-combo-coolers/760gc.html
since that Asetek design inspired my own build.
Is your WC loop reservoir-less?
Whats everyones thoughts on how this GPU would cool in this case?
Paul
http://www.hisdigital.com/un/product2-699.shtml
or any of the sapphire 7850's? look to be more "closed" http://www.sapphiretech.com/presentation/product/?cid=1&gid=3&sgid=1160&pid=1672&psn=&lid=1&leg=0
While we're on this topic, lets say I cut a hole in my case. Will this work similar to the recommended cooler design? http://www.newegg.com/Product/Produ...ion-_-cables-_-na-_-na&Item=14-131-478&cm_sp=
I was thinking the same thing actually - make some fine holes in the side of the case where the fan intake is and use some foam tape to build it up so the GPU fan only takes in fresh air.
However for ease Ill cop it on the chin and go an evga gtx670...Palit and gainward used to make some with the reference cooler but they have disappeared from stock in Australia over the past week.
Paul
I spoke to Jose from Asus (in person at the Engadget Expand conference) about this case and he says the reason why it's not stressed in the manual or on the box is because you have increased cooling efficiency with an impeller design so you get less heat radiating from the card and more heat circulating. Basically, he said there would be little or no difference. He also said he has discussed this in length with Tony from Silverstone and they both concur.
Those here will tell you that the walled off space of the video card receives little fresh air due to air taking the path of least resistance through the case. The GPU would just be circulating it's own air, building up it's own heat and also spewing heat throughout the rest of the case. This will cause fans to work harder and everything will be hotter/louder/potentially unstable OC of GPU.
I've only tested this case with an impeller card and have personally endured the nasty build up of heat. I ripped off the impeller and just stuck a blower fan in it's place and achieved about 5% improvement (I made that number up, it was maybe an itzy bit better). That being said, my card had no shroud on it and I simply changed the flow from down/out to out/out from the fan.
I'm somewhat inclined to believe real world observations rather than expert opinion.
Finally, I lost against my MSI GTX560ti Hawk graphics card and replaced it by a EVGA GTX 660 Superclocked. The direct heat exhaust works much better.
Wait, you're talking about "impeller" and "blower", but this isn't the issue. It's whether the shroud is closed or not. What a closed shroud does is separate the air intake to be 20cm away from the exhaust. Nothing to do with "increased cooling efficiency" whatever that's supposed to mean. So it's not clear if you spoke only about fan types to Jose of Asus? or also about the shroud?
Real world observation recently in this thread:
What if I tape off the shroud on this card?
http://www.tigerdirect.com/applicat...ffiliateID=lw9MynSeamY-8xxxdFA5RtfrWZhD7IP9CA
You think it would be too restrictive to only allow air out the top?
What if I tape off the shroud on this card?
As I understand it from your previous posts, you don't want an EVGA 660 Ti because you feel it doesn't have the price/performance compared to a 7870 or 7950. Is that right?
Unfortunately I'm at 1440p and I read a general recommendations (various places) of GTX670 or 7950. Some stuff about low memory bandwidth of the 660 may be limiting in the future for high resolution. Other stuff about how supposedly even a GTX680 can barely run 1440p at max settings...
So I'm not looking for max everything. I don't care for AA but I do like some AF.
Sounds like forum trash talk, any sources?
Well since AA is something that costs a lot to calculate, then turning it down can improve frame rates significantly.
Which games are you playing? Perhaps we can look for some reviews and tests.
Whilst we're on the subject of suitable graphics cards what about this?
http://www.evga.com/Products/Product.aspx?pn=02G-P4-2643-KR
Can anyone verify if a 9.5mm slot drive will work, or does is have to be the 12.7mm size?
I currently have my PSU fan towards the CPU socket, is there any issues with having the PSU fan facing the side panel? I have the ST45SF.
I'm thinking of swapping mine to neaten up my cables a bit better.
I've just picked up a motherboard & CPU for this case, but haven't yet picked up a PSU. I see several SFX choices on Newegg, and of course the two Silverstone options.
My question: is the non-modular Silverstone SFX PSU the best choice for this case? I'd prefer the modular PSU to keep cable clutter to a minimum, but I believe the modular PSU blocks the hard drive cage?
You are correct. The modular version's plugs will just out from the case and further restrict access to the drive bay area. I'm not sure if it will block it all together, but you're likely only saving one wire with the modular version unless you plan on making your own cables. Also, the Gold version has been known to have a noticeably louder fan than the standard version. I'm not sure if Silverstone has remedied this problem yet. If you're not building a high powered system, the Seasonic SFX's are a good option as well.
If you don't absolutely need a CD/DVD drive, I would advise discarding the drive bay and go the closed loop liquid cooler + fanless ATX PSU route. You can likely fit a 3.5" HDD on the wall opposite the GPU if you need. I have an all air cooled system with the damn Silverstone SFX crap and I HUGELY regret not going the water + ATX route. Four months after my build I'm still annoyed by the noise from the stupid PSU. WARNING: The ST45SF is NOT silent AT ALL. The standard version at least also runs very hot.
That being said, if anyone wants to buy my Big Shuriken 2 CPU cooler + ST45SF, $100. CPU cooler has upgraded CM Blademaster 120 fan on it too.
That's kind of my issue - I'd prefer to make my own cables so I can route them properly and make everything much neater. Mostly because I'm a little OCD and I enjoy the tinkering.
Ideally I'd like to keep the drive cage, as I run a 3.5" drive for storage along with an SSD for the main OS/Apps, and also the optical for the rare occasion I use it. Plus, it seems if you go for the ATX PSU router, don't you have to mod the case?
So from what I gather, if there was a quiet(er) SFX PSU, you'd feel that was a decent alternative to the water cooler & ATX PSU?
Well I don't know if the Seasonic SFX's are silent/better, but I do know that I'm NOT satisfied with the Silverstone SFX. Not only is the fan way louder than it's rated 16db, it makes noises when I move my mouse and Silverstone doesn't know why (it's not the recent diode update because I have that). I think Seasonic makes some of the best PSU's out there so I would trust them a little more. The problem is that no other SFX PSU gives you 450w. Max is 350w and there is only one. So Silverstone has done quite a feat cramming 450w in an SFX. 350w is the absolute bare minimum for a high power system so you don't want to cut short on that...
I totally understand your concern for wanting a 3.5". That was my very reason for getting an SFX PSU also. Now that I know this case well, I ENORMOUSLY regret my decisions. To the point where I almost want to sell my system and start over (same case though).
To fit a full size ATX PSU in there, you simply bend one tiny metal tab and you must use a liquid cooler for your CPU because there will be little space between the PSU/Motherboard. The tab that you bend back is meant to be an aligning tab for the SFX PSU to make mounting easier. It serves no other purpose. Also, you won't be using all the pre-drilled mounting holes on the ATX PSU. You can just put some screws through the mesh guard itself and it will work just as well.
I haven't had a disk drive for years and when I do need one (once a year maybe), it's no biggie to hop to someone else's computer to copy it to a flash drive. I highly advise you to forego the cost of the stupid expensive/slow slim drives and put it towards something else.
Please please don't make my mistakes. Take some time, make some measurements. I'm almost certain a 3.5" will fit in there with an ATX PSU, 10" GPU, and standard CLC liquid block with ONLY the case fan below the case. The SSD will fit in it's bay under the MoBo no issues no matter what you do. You'll have to get crafty with the 3.5" mounting mechanism, but that's where your tinkering comes in handy. Otherwise, zero case mods.
Making your own wires is great fun, but the end result makes little difference other than your piece of mind and aesthetics. I now know that the benefits of having a setup with a FANLESS PSU and swapping out the case fan for a PWM Rosewill Hyperborea 150mm to be used with the Asus MoBo are more than marginal. Absolute minimum amount of noise possible from this case, little or no increased noise under load, far superior O/Cability, you will not stress the PSU at all so it'll run more efficiently/less heat. Best of all, the ability to say you've worked your case to it's absolute maximum and taken FULL advantage of any/ALL space inside. Use your tinkering skills in advance. Go play with wires on something else and don't sacrifice what may be your most precious item. If you still want the SFX crap and need the power, the ST45SF NON-gold is your best bet. The wires are short and tuck well. Don't spend a penny more than you have to on this PSU and it definitely does not deserve custom cables. I picked mine up for $63 shipped from a random website five months ago.
Oh yeah, so I said I had gotten a 660Ti Superclock, but apparently I ordered the 660 Superclock by accident. I'll be rejecting that delivery and I just ordered an EVGA 670 FTW for $330 final price. Way more than I wanted to spend, but I also just made a cool dime on Tesla today... http://slickdeals.net/f/5941414-EVGA-GeForce-GTX-670-FTW-2-GB-349-99-shipping-AR?
Ideally I'd like to keep the drive cage, as I run a 3.5" drive for storage along with an SSD for the main OS/Apps, and also the optical for the rare occasion I use it.
Thank you for all that information - really makes happy I held off on buying anything for the moment.
The motherboard I picked up has an mSATA slot on the underside. I plan to use that for my SSD, so I don't need a 2.5" SSD. I could always use my file server for storage and not have a local HDD. But, it seems like a case that's made for all that gear really should be able to handle it all AND a proper PSU. I guess if I wanted something simple and easy I'd buy a Dell
Couple questions:
The PSU you have/had and regret getting is the modular/gold Silverstone SFX PSU? Or did you pick up the regular bronze/non-modular Silverstone SFX? I saw a post a couple pages back about another SFX that is supposed to be quieter.
How do you like the case? Would you still buy it again? I'm seeing the posts on the front of this sub-forum about the NCASE M1, that looks like a really nice system as well. Might wait and see how that turns out.