Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
rgMekanic displayport daisy-chaining not an option for your setup?
Unfortunately not, main monitors are 3x https://www.dell.com/en-us/shop/accessories/apd/210-ardc?SpecialEventsProductID=2a7g
4th monitor is some ancient Samsung thing I had in the closet heh, then the HMD needs an HDMI
worst case I could get an HDMI switcher or just crawl back and swap plugs between the HMD and 4th monitor, then I only need 4 outs instead of 5.
I need some serious help. So far, I am not happy with the new Radeon VII. I primarily play PUBG and it crashes literally every round, sometimes multiple times a round. I have been trouble shooting my PC for the last 2 week and can't get PUBG to stop crashing. Windows is up to date, my video drivers are up to date, the card is not over-clocked, everything worked fine on my previous RX 590. The only major change I have done to my computer the last few weeks is swapping the RX 590 (which I did run over-clocked) to the new Radeon VII. Do any of you other Radeon VII owner's play PUBG a lot and if so, does is constantly crash? I am about to return my Radeon VII and go back to my RX 590.
View attachment 150719 View attachment 150720
View attachment 150721
Not super impressed with the Bykski block. Chinese craftsmanship lives up to the sterotype yet again.
I wrongly assumed Bykski was a Polish company.... EK for me from here on out. But it should work. I hope lol.
Also this card has star screws holding the heatsink on. Damn you AMD.
Hey, I bought same one, and well have share pictures, i didnt have 200 spend on waterblock, i will get one tho.
The craftsman ship was pretty good on mine, they could of lapped gpu part. But well see how it goes
It’s been working really well tbh. I applied extra paste to contact the sides of the die as well. Went a little nuts with it. I personally found going a little nuts with the thermal paste helped my temperatures more than the “normal” amount. Apparently this thing has 80+ (can’t remember the exact amount) temp sensors around the die and the highest reported temp is what is reported as the “junction temp”. Extra paste around the edges helped with that specifically even though the top of the die looked completely covered when I removed the heat sink.
looks great sir
Nice setup Gulkor
Welp I finally pulled the trigger on upgrading my R9 290, and bought a Radeon VII 50thAE along with 3 of these so we shall see how it goes...
Probably will try to build a full custom loop for this rig later this year when I upgrade the cpu/mobo/ram. Going to wait till Zen 2 drops and see how it all pans out.
You won't regret Radeon VII, i highly recommend doing custom loop,
My Radeon VII o/c's 2000-2100 core and vcore sits 1.050.
I've learned core speed makes biggest performance increases, memory already maxxed with hbm2 and 4096-bit memory bus