• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

[Project] L3p L4n

Looking great so far! Keep up the good work!

Also, that's one sweet barbecue :D
 
Thanks m8 :)

Assembled the case again this week
Quite some work cause of the lcd screen

After that tested if the Velcro would work out.





Works great, i think it can hold me too :p





Pulling it off again wasn't that easy :)





Placed the other stuff again too.





Don't want too much lights on the outside, i like it this way.
Maybe some red glow from the bottom...





Maybe the top casewindow will be blood red plexi too.





Here an airflowtest with the new fanholes.


 
Finally some news!

Been busy at work lately but
Had a nice cup of coffee with Asus Benelux this week.
It was really great Rogier!!

He also brought something nice with him ;)




Finally! ;)




And a new tablecloth, my wife really loves it! NOT :p




And some pics of the Asus Maximus IV Gene-Z










I really like the board a lot!






The first flag.




Together with my dear old P6T6 WS Revo.




And my stand with his new look, didn't become a tablecloth after all ;)






Thanks Asus Benelux and Rogier hope to see you again one day! :p



Oh.. and a small test with a 75-slot Bitspower Crystal link :D




Also this week some news about Exceleram :(
 
Don't want to tell everything about Exceleram, but i do have to explain something when all of a sudden a sponsor disappears :)

After months of contact with someone from Exceleram all of a sudden i didn't hear anything anymore from them.
I found out by facebook a lot of personnel quit their job there ... inclusive the one I was in contact with ... nice :p
After lots of mails i got to hear after 4 months there weren't any samples left, i do have to go on so i decided to thank Exceleram and wish them the best!

I hope to have some good news in a few weeks!


So this evening I mounted my mainboard and EK block so i can go on measuring.











I hate stickers..
Specially when they don't come off easily ;)





WD40 ftw!





And ready.





Glad i don't have to hide the nice red ROG colours like in my last mod :)








EK-Supreme HF Acetal with EK-CPU Easy Mount HF Black


 
I just had to compare the colours of the sleeve and mainboard.
I'm very happy with it! :)


 
Looks very nice indeed!

Always love red/black themes.

Sleeving is killer too.

Good work.
 
Got 2 packages this week.

The first one from my modding friend Richard (Kier).

I saw in his buildlogs TJ11 buildlog he had some spare pci covers cause of 3 GPU's, just the ones i need :)
Thanks m8!






And even better ... Some 'Sleeved by kier' Pci-e cables!
(Yes I'll do it myself the next time ;) )





Some leftovers + sata sleeve from MDPC-X.






I was pretty nervous if it would all fit... just had to take a fast look
(Don't worry, this isn't final :p )




And the second package..
Couldn't tell anything about it till now..
First of all ...Thanks AGAIN Gregor, Eddy and the rest of EKWB off course for letting me try these products!!



Not going to use Feser for this build.
So glad EK came with coolant just in the colour I wanted!







Hmm can't wait for the next episode of "True Blood" ;)



Also want to cool the memory again.
So great EK also came out with a 4-slot EK-RAM block!












Also 2 sets EK Easy mounts for the GPU's.




But the best part ..




The first Gene-Z block that went out from EK ...With my buildlog logo!




Proud!







He also sent an extra base if I ever want to change to nickel.










EKWB FTW!

 
Wow, that custom waterblock is badass! That's quite an honor to have your name on an EKWB block like that!
 
im just getting little white squares with red X's in them for every picture. they worked before! maybe i'll try the virtual machine. im at work and they have so many firewalls and security software and shit that sometimes it makes things that should work, not. :(
 
Found some time to assemble the custom EK Gene-Z block yesterday.







I'm very happy with it!
Thanks again Gregor!




Red or black Bitspower thumbscrews?






While I was busy with this a very very nice package got delivered.
More pics from that later today.

 
Go with the black thumb screws...the red ones don't match the mobo color exactly. They look more rose red and the mobo looks more hot rod red.
 
And as promised the unpacking :)



The first shirt I could actually wear anytime :p






Everything separated.




And one hour of cutting bags later :p




There won't be an inch of tube in this build.




To replace the standard screws.




I love extra goodies!




One of the few case badges I would actually use.




Now I can finish the other side's rad guard of the case.




And a few Bitspower Fanguards i have some plans with.






Back to the connectors.




Yes I was bored on this rainy Sunday afternoon :)
Meet BitScorpion!





(Yes I know, the scissors are missing, didn't have any more :p )





I want to thank Vincent again for this wonderful sponsoring!

 
Love the scorpion. If you have extra peices left over after, I would leave it ;)
 
Still in doubt if I´m going to use the Bitspower fanguards inside the case. The "Enermax Vegas effect" will still be visible if I use them.












Now I received the Bitspower fanguards I could finally finish the last out of 3 radguards in the case.






Made a "little" video of it as promised.
Was able to create a 5 minute video out of 2 hours of material :)


 
Got an order from MNPCTech.



Thanks for the ruler Bill!
Always had something with the MNPCTech fanguards, thought this one would fit perfectly! :)















Guess I'm going for the M4 socket button heads.

 
That's one nice looking MNPCTech fanguard, I didn't know they sold "those" kind of fanguards.
 
Was going to do an update this weekend again but an unexpected package came in.

Had to unpack that first with my daughter, she loves it! (So do I) :)

Here some more photos from the unboxing in a higher resolution (2560px), and the products I already had.



Came in contact with Dremel a few months ago.
When I told them I didn't use a dremel at all for my previous project they really wanted me to use their products for any future mods.
Deal! :)































Thanks a very very lot Dremel®!
Videos where I’ll be working with this nice stuff will come soon!

 
Here an explanation why it all takes a little longer then expected :)

Well some packages took a few months to arrive.
Also the 2 Matrix cards from Asus will not find it's place in my mod cause of a little mistake :)
Rogier from Asus Benelux fully compensated this with the best news I could get...
Instead of 2 Matrix cards..... An Asus Mars II !!!! (And yes I want to watercool it :p)
Thanks Rogier, you really rock!!!

Another thing that kept me from going on.. my attic is completely ready to mod there.
The problem is, my 1 yr old daughter sleeps very bad. (Yes she's like her dad, starts living when it's dark)
So I moved the pc downstairs again this weekend. Now i can go on modding in the night ;)


Changed the black and blue Asus GX800 for a black and red Asus GX900






Also been playing again with the RGB leds, want to place 2 strips on both sides for a nice effect.






Maybe going to use an RF controller, going to test this week if that one has a red-glow-up-and-down function.






And a picture of how cosy I'm sitting at the kitchen table again. :)

 
Ok .. a small teaser how it would look aircooled :)
More pics coming up this weekend!

 
l3p said:
Ok .. a small teaser how it would look aircooled :)
More pics coming up this weekend!

Click to expand...

daaaaaaaaaaaaaaaaaaaayummmmmm. i think you should only wc the cpu so you have room for another mars card in there. :D this looks absolutely incredible though. got an estimate on final weight once its filled with water? it may not be huge, but its still gonna be a pain to take to any lan party. :) im in awe though... just wow.
 
Last edited:
ya i am pretty sure there isnt a water block for the mars card. but that would be sick.

This build is epic
 
I actually HAVE to watercool it!
Still finding a way howto :)
 
you could just get blocks for the GPUs but the memory will not be water cooled. or get EK to custom build a block for you... a "1 off"
 
l3p custom made waterblock for a hard-to-watercool-gpu would make your build that much better, good luck!
 
I don't have the guts to ask EK for another custom block, specially not fora MarsII :)
I guess I'm goin to give it a try with universal blocks!
 
You must log in or register to reply here.
Back
Top