Willsonman
[H]ard|Gawd
- Joined
- Jun 11, 2005
- Messages
- 1,195
It is the DI-524 by d-link. Lots of discussion on forums about the overheating and dropping out possibly due to overheating. In my move I'll be going completely wireless so it was more/less a necessity. Used a 40mm fan. Its cheap and works great for our little home network. I did not think buying a new router was justified when a hole, fan and some solder and epoxy would fix the issue.
You can see the poor heatsink on the chip on the right. The cover on this model comes off with 2 screws and the PCB comes off with 2 more. Very simple design... just needed a small fan.
Hope this helps.
You can see the poor heatsink on the chip on the right. The cover on this model comes off with 2 screws and the PCB comes off with 2 more. Very simple design... just needed a small fan.
Hope this helps.