Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
WTF?
Bad news gents. Looks like the 140mm fan is blocking the rear 120mm fan from an h70 installation...i just opened it up and will post pics later tonight of the build.
Any fan filters????
Can a 5970 fit? And a NH-D14?
http://www.lian-li.com/v2/tw/product/upload/image/v354/flyer.html
Seems the two front fans have filters. Might be a bit of negative pressure in that case which would mean dust.
There are 3. 2 on the 120's in front and 1 on the 140 on top.
Also what is the point of a dust filter on the 140mm? Isn't that one set to exhaust?
If you use it as an intake then you would have a positive air pressure which would mean less dust inside the case.
so still trying to figure out if a Noctua NH-D14 will fit the case and teh Rampage Gene III mobo.
Here is my rough sketch of positioning:
http://img687.imageshack.us/img687/5844/pccasefit.jpg
Problem is I dunno quite where the CPU mount sits so hard to be sure it'll fit.. I've a feeling we're out of luck.
cable management is a nightmare for this case
It depends, if the cooler+fan=114mm then yes. but if the heatsink alone is 114mm it won't fit with the 25mm fan on top.
You have roughly 5 inches from cpu to PSU. I just got a geminii s because my measurements told me no.
It depends, if the cooler+fan=114mm then yes. but if the heatsink alone is 114mm it won't fit with the 25mm fan on top.
You have roughly 5 inches from CPU to PSU. I just got a geminii s because my measurements told me no.
Thanks Jbrow. I was planning on removing the 140mm fan from the case and either positioning the Noctua so its 140mm fan was at that end.. or rotating it 90 degrees so that it just pushed out the rear vents.
From what you say, it does sound just tooo tight to fit it. I've a feeling it'll hit the PSU or the case top. The Noctua Dimensions are:
140 wide x 158mm deep
or
140wide x 130mm deep (with the 140mm dismounted)
it can rotated any way.
Can you tell me how far the CPU mount is roughly from the top of the case? I can figure out the space from there I think.