GPUCommando
Gawd
- Joined
- Oct 29, 2006
- Messages
- 542
I saw this in my email and was like
Too bad i don't have $200 to blow
Too bad i don't have $200 to blow
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Thank you. I forgot that they put that on the box. I'm going to call the store back and see if I can get one of the reps to check the box for me to make sure, plus put one on the side for pickup. Now to find a screenshot of the box so I can talk them through it, if they cooperate.
Denver had 27 instock when it opened. 23 instock after about 5 minutes. My buddy and I each got one and another guy got 2.
Layaway!Wonder if the Quads will last in the Pennsylvania Microcenter until I get paid at the end of the month?
Ok, just got off the phone with the Long Island location and had one put aside. They are selling SLACR G0 processors. So if you are in the Long Island area, JUMP ON IT!
Thx for the pic JBX86.
w00t, picked up the last one at Tustin Frys
i thought they said 1 per household, how did that guy pull it ofF?
Just picked one up at the Overland Park, KS store I got there about 10:05 and there was only one left in the case after I purchased mine. If you are headed to that store you might call to check stock first.
Westbury.I have a micro center only 3 minutes from where i work. i will take a trip this afternoon after work. I believe you are talking about the one in Carle Place.
You will have a very difficult time finding either of those. The E6600 for example went on clearance a few weeks ago and all the employees have cleared out the stores.check your local fry's some of them have like e6600 for $70 retail
qx6700 for $200
Yeah, tax sucks. Total was $217 here in NY. My total with gas is $230. I saved $50 and got to listen to some tracks I haven't heard in a while during the drive to the store and back, I think I spent about 2hrs total driving.Just got one from the Chicago Microcenter. I can't remember the last time I bought from a B&M, but the tax was $18! Just for a second I thought of skipping it, but it took me an hour to get there (traffic, usually its 40mins).
Are you guys sure the sale lasts until the 27th? I was told it was today only.
Thanks OP!
Dang it! No MicroCenter's near me here in Tucson Arizona. Give anyone here $10 (on top of the cost of the chip of course) to pick me up one and ship it to me. PM me if you're willing!
I got one from the Rockville, MD MC at ~ 7:30pm. They had 6 or 7 left, starting off the day with 42. If any of you early risers care to get one, they should have some.
Amen. That's the hook, get you in there for a Q6600 @ $199, a SLACR at that with the hopes that you walk out with a new PC worth of components. The Micro Center out in LI was like a candy store, almost like if I were to walk through New Egg. They had OEM parts on shelves and in bins. Sale tags everywhere, it was quite overwhelming. Luckily I don't need anything so it was easy to resist temptation.Just picked one of these up for myself today. G0 Stepping. The guy that sold it to me seemed a little peeved I didn't want to buy anything else, but who cares, I'm not going to buy extra stuff just to appease them. They priced it this low.
Hahaha, you ain't lying. I took a credit card and held the chip up to the light and checked for light leakage all across the chip and after taking a ton of mental notes I got a picture of a S shaped pit running across the chip. I need to lap this bitch. Problem is, this will be my first time lapping a chip. I'm actually excited about this. I wonder how many degrees I'll drop from lapping, if I don't f*ck it up.I'm already up to 3.15Ghz with plenty of headroom to go. My only beef is how damned warped the heat spreader on this thing is. There were 0.25mm gaps between a razor blade and the surface in some spots. I think I'm going to have to lap it since I've already confirmed it works just fine
Holding out for the Q9450 is getting harder by the day!