Curious if those of you that have water cooled 1080s could post your temps and your setups i have a 1080 hydro copper and just not happy with its temps so i bit the bullet and got a ek block thinking it would improve my temps i got same or worse out of it sadly im currently seeing 40-47c gaming/benchmarking 46-55c mining with ambs being 19-23c. My current setup is this ek dual bay dual pump ddc >>> xspc rx240 >>> ek 1080 ftw >>> black ice 360 >>> koolance i380 >>> ek ce 420 >>> dual bay dual pump ddc. I have 3 ek 120mm vardars on the 360 6 140mm on the 420 and 2 120mm on the 240. My cpu is overclocked to 4.2Ghz with 1.36 vcore and at 100% load its package hits 53c when rooms at 23c when its 20c in here does not break 50c none of the cores break 45c even at 23c in the room. The thing i notice soon as i load the gpu temps shoot to max instant almost like bad mount but i have taken the card apart like 10 times used differnt amount and ways i put paste on. The one thing confuses me is if you look at the pdf it lists a wierd thing about vrms.
https://www.ekwb.com/shop/ek-fc1080-gtx-ftw-acetal-nickel
https://www.ekwb.com/shop/ek-fc1080-gtx-ftw-acetal-nickel