I got this board in a few days ago and I'm running into a big issue.
On my P5K-E I could run 3200mhz for 24hours in P95 yet with Maximus the computer reboots during Prime. I'm using the same settings as my P5K so I'm stumped... (voltages adjusted so they would be the same after vdroop/overvolt)
Temps are good as well... below 60C on the CPU.
I'm wondering if it is the NB causing this. What is the optimal chipset voltage for a 400FSB?
EDIT: I've lowered the speed of the memory, CPU, and FSB yet I still get BSOD during Prime. Load temps are about 47C for the CPU and NB. This CPU as well as the memory were rock solid with my last mobo. This is an issue with the Maximus... I just need to figure out if it's faulty now.
A 47C NB could be a problem...
Raju found that loaded NB temps over 47°C have been prone to failures, during longer Prime torture test runs. This is not an exact number, nor should it be considered as such. It is simply ment to help give you a better idea, of what NB temp you might wan't to avoid, for the best system stability. I don't believe it is a hard line drawn in the sand that can't be crossed, but rather use it as a guide myself, and was grateful for the information posted in his findings.
Raju's and Bingo13's Maximus SE review: http://www.anandtech.com/mb/showdoc.aspx?i=3149
Ref link: http://www.xtremesystems.org/forums/showthread.php?t=162085