Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
12 Axes said:I'm just trying to get my system sorted out but I think I have some answers for you.
I have,
temp1-PWM
temp2-CPU<--Both read the
temp3-CPU<--same on my sys.
local-Video card
Remote-GPU
i got a new LG burner... the 4167B... same f****** thing, what's up? someone can help me? i have to do backups of my hard drive...nico said:My LG-4160B (flashed with the lastest firmware; A306) only works in PIO, if I force it to use DMA (in Windows/or in the BIOS) the drive doesn't see my DVD/CDs. Any ideas?
Rabbitrunner51 said:Is there a way to take a picture of my bios settings for Chipset selection...here.so that someone more knowledgable could see if all are set correctly?? I believe most are....![]()
The max stable most get is 274 HTT. The board isn't good for past that reliably.HighwayAssassins said:Just bought it off newegg. I had a few questions:
1. What type of OC can I expect? Anything over 245HTT will be good in my book.
For testing the inital overclock, OCWBeta1 or 2. They're the ones that people have used to get the high HTTs, and are the only ones that supposedly don't have a cap at 274 HTT. However even with these BIOSes at above 274 you're likely to have problems getting the computer to boot the first time you hit the power switch. You'll likely have to reset to get up and running each time you start it at those settings. For this reason, I stick to the 1.6 official bios, as it wasn't worth the hassle of reseting all the time for a few more potential MHz. YMMV though, as I haven't done any volt mods to really stretch my setup, and there are people out there who run at higher than 274.2. What bios? 1.6 just came out, should I stick with the official most recent bios, or go with the OCW Beta 1-5?
hm, thank you for the response. I think i will take your advice and use OCWbeta1 to test my max OC, then compare it to 1.6.Niloc said:The max stable most get is 274 HTT. The board isn't good for past that reliably.
For testing the inital overclock, OCWBeta1 or 2. They're the ones that people have used to get the high HTTs, and are the only ones that supposedly don't have a cap at 274 HTT. However even with these BIOSes at above 274 you're likely to have problems getting the computer to boot the first time you hit the power switch. You'll likely have to reset to get up and running each time you start it at those settings. For this reason, I stick to the 1.6 official bios, as it wasn't worth the hassle of reseting all the time for a few more potential MHz. YMMV though, as I haven't done any volt mods to really stretch my setup, and there are people out there who run at higher than 274.
Also, I don't see much purpose for the OCWBetas past version 2. Seems like versions 3,4,5 are merely branded versions of the old bios with a couple hidden features (as in 100 MHz memory divider) extra. But if you can't go above 274 HTT the dividers don't have much of a purpose. The new betas are a big difference from the overclocking goodness you can get with betas 1 and 2.
It shouldn't really matter (i.e. you should be good with that driver, as long as you have the correct settings for dual core, as the drivers are multithreaded.) I guess a decent old driver I remember was 66.93, but it might not like some newer games--81.98 or whatever is latest is really optimal for your system.Rabbitrunner51 said:Question...
And I wonder just what AGP video driver for previous Nvidia cards is best suited for an X2 3800 CPU system?
aarondavis121 said:1.5 firmware seems good for 4 dimms, and you will have to run 2T.
awdark said:Does anyone know if this board can go into deeper stages of standby?
Not hibernate but standby. My old motherboard could go to standby to the extent where the computer was silent and only blinked the power light. Click the mouse and back to the desktop...
Doesn't seem possible..
mrmodman said:i orders this board and im wondering if there is a clearence issue with the zalaman 7700cu hsf getting in the way of the memory
mrmodman said:anyone useing 2x1gig sticks in duel channel with no problems?
also should my system work fine?
amd [email protected](on msi k8tneo2) use zalaman 7700 HSF
2gigs duel channel
x800gt agp
500wat psu
sound blaster 5.1 live
wd 80 ide
will i see any problems?
hows my system look performance wise?
mrmodman said:anyone useing 2x1gig sticks in duel channel with no problems?
mrmodman said:anyone useing 2x1gig sticks in duel channel with no problems?
also should my system work fine?
amd [email protected](on msi k8tneo2) use zalaman 7700 HSF
2gigs duel channel
x800gt agp
500wat psu
sound blaster 5.1 live
wd 80 ide
will i see any problems?
hows my system look performance wise?