AMD Boosts Its AMD Fusion APUs

HardOCP News

[H] News
Joined
Dec 31, 1969
Messages
0
AMD updated its award-winning C- and E-Series Accelerated Processing Units (APUs) for ultrathin and value notebooks, netbooks, all-in-ones and desktop PCs with top of the line features. The updated APUs deliver:

  • Enhanced HD graphics capabilities
  • Performance boosts with enhanced memory
  • DisplayPort ++ for connecting to any HDMI or DisplayPort-enabled monitor or TV
  • 12 hours of resting battery life on a single charge for the mobile platform – a nearly four hour increase over previous platforms
  • Notebooks, netbooks, small form factor and all-in-one desktops based on these new APUs are available from leading manufacturers starting today
"Today’s PC users want stunning HD graphics and accelerated performance with all-day battery life and that’s what AMD Fusion APUs deliver," said Chris Cloran, vice president and general manager, Client Division, AMD. "With these new APUs, we’re bringing premium features to entry-level products that let users get a richer computing experience."
 
I presume this means that they launched the E-450 and C-60, but this press release is so light on details it hurts!
 
Saw some reviews of the top-of-the-line A8 series on another site. Would be good for a HTPC, or maybe an ultra-cheap gaming machine, but I don't see enthusiasts getting these. The I-5's and I-7's kill these in sheer processor power.
 
I waiting for AMD before building my HTPC, but ended up going with the intel i3 2100 instead.
While AMD has better video, the CPU power is weak compared to the Intel chips, and the Intel video is more than enough for 1080p playback.
 
Saw some reviews of the top-of-the-line A8 series on another site. Would be good for a HTPC, or maybe an ultra-cheap gaming machine, but I don't see enthusiasts getting these. The I-5's and I-7's kill these in sheer processor power.

I waiting for AMD before building my HTPC, but ended up going with the intel i3 2100 instead.
While AMD has better video, the CPU power is weak compared to the Intel chips, and the Intel video is more than enough for 1080p playback.

I think you are confusing market segments. This is not related to Llano.

This is about the C and E series. The ultra low power APU's with a TDP of 9 and 18W respectively.

These will mostly find their way into low powered netbooks.

There are also some desktop boards for those who like ultra low power. I am definitely building a linux server out of one of these. Since the server is on 24/7 this ought to save considerable power, and still have sufficient power.

From what I'm reading the E-350/E-450 ought to be powerful enough for a HTPC box as well. The only thing standing in the way right now is the lack of GPU acceleration in Silverlight, which holds back HD content from Netflix. Silverlight 5 will apparently correct this.

Unless you are using it to do more than just watch movies / listen to music, a Core i3 or Llano ought to be total overkill for a HTPC system. Might as well go with one of these and save some power instead :)

Whats amazing is that the E-350 / E-450 it accomplishes its 18W combined CPU (2 cores) and GPU on a 40nm process. I can only imagine what this would be like shrunk down to 32nm, or even 28nm... :eek:
 
Yeah a lot of people don't even know what the C and E processors are. Was looking at them and was surprised they were clocked around 1ghz. Guess these things are easy to passive cool without fans.
 
Yeah a lot of people don't even know what the C and E processors are. Was looking at them and was surprised they were clocked around 1ghz. Guess these things are easy to passive cool without fans.

The E-350 is a dual core 1.6Ghz chip The E450 is a dual core 1.65Ghz chip.

They have integrated graphics that beat Intels last generation Arrandale solution, and still come in at a TDP of 18W.

This is very impressive to me.

Unfortunately they don't come in traditional socket/motherboard designs. The only way to get a desktop version is directly soldered to a micro-ATX or mini-ITX board. There also does not appear to be any standard mounting holes, so there are no third party coolers, so all the coolers are whatever the motherboard maker put on there.


Some boards are passively cooled. ASUS passive coolers seem to get good reviews, but Foxconn and Elite Group's passively cooled boards seem to have complaints of overheating.

Most boards ship with a small 40-50mm fan on a tiny heatsink. Some boards have received complaints of making a whiny annoying noise others have not.

I guess it is possible to custom mount some desktop cooler on there, but it probably won't be straight forward.
 
It has no problem with daily use and plays HD fine with programs that use the GPU, but you cannot do Netflix HD atm as there is no gpu acceleration in silver light and it is 100% CPU usage.

Try downloading the Silverlight 5 beta runtime here. It reportedly adds GPU acceleration to Silverlight.

I'm not sure if it will work out of the box, or if Netflix would have to upgrade their software for it to work, but it would be worth a try (and I'd be very curious about your results).
 
I think I'm holding out for something like the ASUS E35M1-M PRO in E-450 form for my server. Then when I build a HTPC it will likely be a mini-ITX E-450 with a passive heatsink. Probably Asus as well.
 
I guess I was lucky, two weeks ago I purchased a Acer A0722-BZ454 and it came with a C-60 apu vs the C-50 that was advertised.
 
Zarathustra[H];1037661111 said:
I think you are confusing market segments. This is not related to Llano.

This is about the C and E series. The ultra low power APU's with a TDP of 9 and 18W respectively.

There are also some desktop boards for those who like ultra low power.

I was initially looking at the E-350 for my HTPC. While it’s fine for 1080p playback, recording a couple analog channels in the background at the same time would have been pushing the CPU. There was also the problem with Silverlight, and any future video that wasn’t accelerated.

You also might want to look at some of the reviews comparing the i3 and the E-350 in a HTPC. The idle power usage of an i3 system in a number of the reviews, is actually lower than the E-350 or an Atom/Ion2 platform. The i3 even draws less power than the E-350 when playing back 1080p video.

The Llano CPU’s where a lot better, but the idle power on the desktop models where alot higher than the i3.

Plus, if ever need more power than the i3 can offer, I can plug an i5 2500 or i7 2600 CPU in the same board.
 
The Llano CPU’s where a lot better, but the idle power on the desktop models where alot higher than the i3.

I'm curious about this. Do you have a good link?

Plus, if ever need more power than the i3 can offer, I can plug an i5 2500 or i7 2600 CPU in the same board.

Fair enough, but at $99.99 for an E-350 motherboard/CPU/GPU combo (and presumably E450 as well once they hit), one wouldn't be out that much money if one decided to upgrade :p
 
Zarathustra[H];1037661111 said:
I think you are confusing market segments. This is not related to Llano.

This is about the C and E series. The ultra low power APU's with a TDP of 9 and 18W respectively.

These will mostly find their way into low powered netbooks.

There are also some desktop boards for those who like ultra low power. I am definitely building a linux server out of one of these. Since the server is on 24/7 this ought to save considerable power, and still have sufficient power.

From what I'm reading the E-350/E-450 ought to be powerful enough for a HTPC box as well. The only thing standing in the way right now is the lack of GPU acceleration in Silverlight, which holds back HD content from Netflix. Silverlight 5 will apparently correct this.

Unless you are using it to do more than just watch movies / listen to music, a Core i3 or Llano ought to be total overkill for a HTPC system. Might as well go with one of these and save some power instead :)

Whats amazing is that the E-350 / E-450 it accomplishes its 18W combined CPU (2 cores) and GPU on a 40nm process. I can only imagine what this would be like shrunk down to 32nm, or even 28nm... :eek:

increible!
 
Zarathustra[H];1037661821 said:
I'm curious about this. Do you have a good link?



Fair enough, but at $99.99 for an E-350 motherboard/CPU/GPU combo (and presumably E450 as well once they hit), one wouldn't be out that much money if one decided to upgrade :p

main reason is llano APU are the first AMD (CPU) products that have full power gating, otherwise known as C6 Power state, the lowest possible (Intel has had this for a while, iirc). However, llano does suffer a bit, because it only has two main voltage rails, so it cannot truely power down individual cores all the way like Intel does. Only in a few situations can it do so. I hope the next gen fixes this, along with bulldozer itself already being designed that way.
 
Zarathustra[H];1037661821 said:
I'm curious about this. Do you have a good link?


Here's a link, but with a few caviots.

http://www.bjorn3d.com/read.php?cID=2087&pageID=10752

You might notice they tested using the low power i3 2100T. However, it doesn't matter which i3 you use, since any Sandy Bridge dual core will basically have the same idle power draw. Even the qual core is only a few more watts at idle.

Also, the Asrock board they used for the i3 was a poor choice as it is not very efficent. I used a basic MSI board, and even with a 2.5" 500GB 7200rpm laptop system drive, and a 2TB WD green data drive, a dual TV tuner card, DVD drive, and a non-green 550 watt power supply, my system idles at 43 watts, and only uses 55 watts for blu-ray playback.

Zarathustra[H];1037661821 said:
Fair enough, but at $99.99 for an E-350 motherboard/CPU/GPU combo (and presumably E450 as well once they hit), one wouldn't be out that much money if one decided to upgrade :p

Only paid $99.99 for the i3 2100 CPU, and the board was only $50 after rebate & the combo coupon deal at Micro Center. For $50 more it seemed like a better deal :). I also use the system as a cental backup server and for streaming video to other PC's in the house, so more CPU was a plus.

If I was building a small HTPC, that was only going to be used as a DVR and/or playing back DVD's/Blu-rays, then the E-350/E-450 would be a good choice.
 
Here's a link, but with a few caviots.

http://www.bjorn3d.com/read.php?cID=2087&pageID=10752

You might notice they tested using the low power i3 2100T. However, it doesn't matter which i3 you use, since any Sandy Bridge dual core will basically have the same idle power draw. Even the qual core is only a few more watts at idle.

Also, the Asrock board they used for the i3 was a poor choice as it is not very efficent. I used a basic MSI board, and even with a 2.5" 500GB 7200rpm laptop system drive, and a 2TB WD green data drive, a dual TV tuner card, DVD drive, and a non-green 550 watt power supply, my system idles at 43 watts, and only uses 55 watts for blu-ray playback.

Interesting - if brief - read.

I was very surprised by the relatively high wattage for the E-350... I wonder what kind of PSU they were using. With a high efficiency power brick and a picoPSU I have seen other tests in which the E-350 actually idles below it's 18W stated TDP, as a fully built system (granted with an SSD, but even so, its impressive)

I can't help but think they might have used a traditional desktop PSU, which use a lot of overhead power at idle which a picoPSU wouldn't...

The 23.976hz frame syncing issue on the Sandy Bridge looks like it would have the potential to drive one up a wall though.

Only paid $99.99 for the i3 2100 CPU, and the board was only $50 after rebate & the combo coupon deal at Micro Center. For $50 more it seemed like a better deal :). I also use the system as a cental backup server and for streaming video to other PC's in the house, so more CPU was a plus.

If I was building a small HTPC, that was only going to be used as a DVR and/or playing back DVD's/Blu-rays, then the E-350/E-450 would be a good choice.

I currently have a low powered AMD Athlon X2 3250e in my server. It's a last generation AMD low power CPU with a rated TDP of 25W (that does not include the GPU) At 1.5Ghz, dual core, it is about tied with the E-350 at 1.6ghz (apparently the bobcat design loses some IPC over previous K8 based designs)

For my use as a general file and media server I am happy with it as its current speeds, so I don't think I need anything faster. The reason I want to upgrade though is that its on a small form factor motherboard without any expansion slots, and the AMD 780G chipset has some eSATA issues preventing me from using my storage array over eSATA, so I am stuck with USB2 transfer rates :(

I was thinking about getting a microATX E-350 so I have a few expansions slots, use it in my server and then try to sell the system the 3250e is in for cheap, but now I'm I wondering if it makes more sense to just get a cheap socket AM2 motherboard, and transfer the 3250e over to it from the SFF system.... That being said, I couldn't sell the SFF system without a CPU... :p
 
remember the e and c series are saddled with single channel memory controllers... they would make the systems alot better with a dual channel
 
APUs. Meh.

What "premium features" are they bringing? Are "enhansed" HD video and display port only availible to the select few now?
 
the best feature of these over the atom line is ati 6xxx series graphics over the intel gma powerless pos
most atom powered netbooks run.
 
Saw some reviews of the top-of-the-line A8 series on another site. Would be good for a HTPC, or maybe an ultra-cheap gaming machine, but I don't see enthusiasts getting these. The I-5's and I-7's kill these in sheer processor power.

sorry but this comment is kinda retarded.... you're comparinge a ITX / notebook solution to a high-end desktop platform like i7? Yes my dual-xeon x5670 48GB PC is way faster than an iPad.. i just don't understand why people would buy iPads and not dual-xeon workstations?? some people are just crazy? Who wouldn't want to carry around two PC towers, 46" screen and a bunch of cables in their bag?
 
remember the e and c series are saddled with single channel memory controllers... they would make the systems alot better with a dual channel

AMD's goal was to achieve 90% of the performance clock-for-clock as k8, but in a super low power package.

From all the CPU benchmarks I've seen of this thing they seem to have accomplished this with single channel DDR3-1066.

The 1.6ghz E-350 is pretty equivalent to a Athlon X2 3250e at 1.5Ghz, and the Athlon uses dual channel DDR2-800.

Dual channel DDR2-800 results in 2x6400MB/s = 12800Mhz / peak.

Single channel DDR3 results in 8533.333 MB/s peak fill rate

It's quite possible that these low end low clocked parts don't need all that bandwidth, and are better off with the lower latency and lesser complexity of a single channel implementation.


Remember, back in the day when DDR2 dual channel implementations were first released, CPU's were not really fast enough to take advantage of it, so people weren't seeing the performance benefits they expected.

Even more recent tests with Intel C2D's have found almost negligible differences between running the same board in Dual Channel vs. Single channel mode with DDR2-800 Ram.

The conclusion from this is that it takes a highly overclocked or at the very least very high end CPU to properly take advantage of the extra benefits of dual (or triple) channel RAM.

The E-350 is a dual core system at 1.6ghz. It won't fall into that category.

Seeing that the CPU is not changeable on these boards, they likely saw no reason to implement dual channel ram on the board, as it would not have made any difference at all.

The E-350 probably doesn't even need DDR3 ram, but they probably implemented this as the price of older slower DDR2 ram is now higher than equivalent DDR3 ram, and their goal was to lower overall system cost to OEM's.
 
Back
Top