Lord_Exodia
Supreme [H]ardness
- Joined
- Sep 29, 2005
- Messages
- 7,008
I know this thread is probably a little early. One thing that I hated about the Cayman cards is that most cards had a unavoidable screen tearing on one display if you are using mixed connections with your monitors. E.G. I"m using 2 Mini DP to DVI and 1 DVI and I get tearing. After extensive research I found that this was a hardware limitation on the cards themselves. The only way to avoid this was to run 3 monitors using DP and this was only possible on a rare set of cards. E.G. 6990s Asus Direct Cu2 cards. (Triple Slot)
I see that the 7970s have LESS ports on the card with only a single DVI, 1 HDMI, and 2 Mini DP connections. It seems the Single link DVI was omitted. Does anyone know or has anyone been able to Test if the tearing prolem that plagued Cayman cards still exists on the Tahiti Cards?
I see that the 7970s have LESS ports on the card with only a single DVI, 1 HDMI, and 2 Mini DP connections. It seems the Single link DVI was omitted. Does anyone know or has anyone been able to Test if the tearing prolem that plagued Cayman cards still exists on the Tahiti Cards?
Last edited: