Search results

There are plenty of SFP+ out there for sure, but the copper transceivers add cost. I suppose it will have to be 12 port for now and GbE for the remaining drops. There's 44 drops total.

Hey all, So are there "cheap" deals to be had on 10G hardware? Looking to plug all this cat6 I have placed throughout my home and would love the glorious throughput to my NAS with the 2nd benefit of faster access to the iSCSI targets I have on the NAS. Based on this video here a year ago you...

It's HIGHLY unlikely the CPU is blown. Despite what you may think, they're quite robust. I would suspect motherboard at this point, but don't let that stop you from putting that CPU in a known good system and see what happens.

I got them for super cheap in August. Have been building this thing since then. I'm thinking I might go 1300G2 just to be on the safe side.

Hey all, In my upcoming superbuild, I'm planning on running a 5960X with two Fury X's. I currently have a 850W Silverstone 80+ Silver PSU. Upon looking at specs for the Fury X's, their stated draw is 275W-350W whereas the CPU has a TDP of 140W. Am I doing this calc right? Let's assume I...

Voltages will tell you nothing without load testing the PSU, which I assume you don't have the equipment for, This strongly looks like PSU.

Going out on a limb here, but have you tried a different cooler or re-applying your TIM? Could be holding back some degrees of freedom here on one of those respects!

Good thing EK didn't name these the "EK Challenger". What a PR fiasco that'd be :o

If it IS the PSU, removing the video card may have reduced the power draw on your system to a point where it is now able to somewhat power on.

The massive 99% - 1% poll results basically have made OP's attempt at discourse nothing more than a straw poll :D

Nah Polaris is referring to how cold it is outside of AMD's Commerce Valley Drive's offices ;)

Except that they aren't dead. Their e-commerce site is broken, you can only order by phone.

Just to chime in here, I have a tube of MX-4 that is about 3 years old and...it's somewhat hard to describe. It still squeezes out of the tube and spreads, but its not very...viscous. Not sure how'd I compare it to a fresh tube. Definitely thicker than AS5 and my tube of Ectotherm.

Phanteks Enthoo Primo

I'm planning on cooling 2x Fury X's, a 5930k + mobo Vreg's and mosfets with custom water blocks. What size of rads would you use if you planned to OC everything? I was thinking 2x 280mm rads for the video cards and a 420mm rad for the cpu/mobo. Is this too much? Or can I simplify this...

Ordered $150 worth of gear from them last week. Took 1 week to arrive. Had to phone the order in of course, but there were no issues.

Planning my radiator requirements for my new semi-uber build. I'm planning on running 2 pumps. Loop 1 = pump --> r9 fury --> 240mm rad --> r9 fury #2 --> 240mm rad #2 Loop 2 = pump --> mobo vrm --> chipset --> 5930k --> 360mm rad Is a triple rad really enough to support that kind of...

Sorry for the bump, but I'm also having issues running 2x 290x's in my system too. Gigabyte Z77X-UD5H with a 3770K and 8GB. Game responsiveness is choppy at best, with something as pedestrian as CSGO feeling like I'm playing on a TNT2.

Sorry that was my buddy posting about his rig...my sig is old. Here is his setup: ASUS A8R32-MVP deluxe 2x512MB Crucial Ballistix OCZ 520W PowerStream PSU Zalman CNPS9500 HSF

sorry i didnt mention what i did to test it. i swapped out the graphics card with another card same problem warrenty replaced the motherboard memtest86'd the memory the one gb stick is good and voltages on the PSU are within norms with pcprobe2

Ok guys. i finally identified what was causing artifacting during games, stalls with limited functionality in windows/gaming, and random resets. so i ran sandra and got the following results *following screenies* and also did a task manager cpu usage check, and i got 55% when scrolling msn...

http://www.xtremesystems.org/forums/showpost.php?p=1221314&postcount=1365 Can you clarify just how new it is? :confused:

bump, even 1 drive?

Needing 2 of these things, can't seem to find them throughout these forums that are available for sale, anyone wanna ditch em to me, upgrade to 74gb's anyone? :D Heat is in sig, PM me with offers?

IMHO, the transistor on the mobo dosen not exhibit signs of explosion. If that transistor were blown, there would be dark areas around that resistor, not in one place. It merely looks like your CPU got shot and blood splattered onto the mobo below. RIP CPU

Memory is at stock timings :( CD's are clean EDIT - problem found...memory, despite memtest showing no errors :(

Tried both an LG 16X DVD and a 24x10x40 burner to no avail :(

Here's the setup: -A64 3200+ Clawhammer C0 -1x512MB stick Kingston HyperX BH5 -DFI Lanparty UT NF3 250GB -eVGA GF 6800GT Previously to this I bought a used MSI K8N Neo Plat. that I used for a day until it died...when I turned it on it would power for 7 secs then shut off, North bridge...

I'll have whatever you're smoking, it sounds like some real good shit :D

quoted

My K8N Neo was total shit, built my new rig and died 1 day later...hello DFI...

Thats definately a negative, seeing as the K8N Neo seems to have its share of problems... More like aBit, DFI...and I'll leave these retarded dots here to make it seem like i'm impatient or pissed off

Bump

Bump, anyone?

Someone tell me why DFI didn't use the Nvidia MAC and opted to use the pos Marvell chip for LAN?

Anyone got a drive like this that they can sell me? Throw me offers plz!

Well let's not forget the magic of 2 Voodoo2's in SLI......since 3dFx is now a part of nVidia, we will assume they are using knowledge and expertise gained from the acquisition of 3dFx...

Never have I seen a more incoherent post in my life...

You never got back to me on my offer!

Quoted for truth