Search results

This is my LAST OC before i do my volt mod and change my AGP card.. :( Testbed: running ATItool to fully OC my Powercolor 9700-nonPRO (flashed and OCed) OC my cpu to 3.6GHz (need volt mod to fully tap my Mushkin Level2 Special Edition@2226 (heard it was BH6) Whole system is about...

Hi there! Eversince i've used CAT5.x drivers, i've experiencing corruption, tears, artifacts, .etc.... this only happens during cold-boots... and the corruption only happens after the "welcome" screen... usually i need to shutdown the pc and restart it and the problem will go away...

I just got myself a Kingston Value Ram with Hynix BT-D43 chipset with latency of 3-8-3-3 :D So for testing, I've set my OC backed to 200Mhz FSB @ 2.4Ghz. Running CPU:DRAM ratio of 1:1, installing the RAM at DIMM1&3 200Mhz 2.5-6-3-3 (pass) 210Mhz 2.5-6-3-3 (pass) 220Mhz 2.5-6-3-3 (pass)...

my current fan configuration in my casing... front bezel, 120mm 93CFM sucking fresh cool air from outside 5.25" bezel modded to be exhaust for the excessive air intake... rear, 1 60mm 40CFM to suck air from outside towards the vid card rear, 1 duct for 92mm delta 110CFM intake to CPU...

is it me or lots of threads get missing in this case modding forum? i don't experience such problem in the OC forum

From my previous mod, I've finally decided to cut out the stamped grill to improve the air flow... I don't have any dremel, so a 1inch hole-saw will be up for the job! First Blood! Remember to use glove when drilling :(... my hole-saw snagged a piece and sent the shurikens flying...

just a question.. I've got a Nokia 7650 which was broken, i'm wondering whether i can take the LCD out amd mod it to my PC? is there any link for this?

Remeber this? After one year of service, I've decided that it's time for upgrades.. Got myself a Thermalright XP-90! *pics were taken with my handphone... Well the 120MM gotta go... with my casing close, the XP-90 isn't getting enough cool air with the Delta Crossflow 110CFM fan...

well, after serving me more than 1 year, i guess the air duct have to go! now comes AIR RAMP! (Ideas tribute to dell and HP ):P (sorry for the crappy pics... i took with my camera phone) Now with Thermalright XP-90 For the AIR RAMP Need? 2 x 50pcs CDR drum cover because of...

Anyone had any experience with Kingmax DDR433 rams? it's kinda cheap, does it compatible with my rig below? and does it run stable at 433? planning to get new RAMS for OC as my current ran only limit me to DDR400... here in my country kingston hyperX costs USD$150 for 2 pcs of 256Mb...

My PC used to be able to run at 315FSB at CPU:RAM 3:2... now i only manage to get to 305FSB... anything above the PC will not boot and alarms start going off! I've even relax it to CL3 and add another 0.1v to it. can it be caused by an accident happened the other day? i've flashed my bios...

before my cleanup :( after clean up!

I've just flashed my bios to v2.0 so far, one major difference is the CPU temps... before it was reading 46.5C on startup, 48.5C on idle 51C on load now after the update, 39C on startup 40-41.5C on idle 45-46C on load now i can start to compare temps with asus boards ;)

ns is nano seconds... meaning 3.3ns is 3.3e-9 or 3.3x10power of -9 to get the speed... it's just 1/(3.3e-9)=303.03Mhz my infenion at 3.3ns only run stable at 297mhz... not even 300

now the question is... they ONLY manage to OC from 200FSB to lame lame 309FSB on LN2! i did mine at 315FSB on air and run it as unstable as tom's :D another thing... he's using procs that aren't available in the market... it's like using current 2.4C and OCed it to 3.6GHZ and compared it with...