JW is the current offering. JH is slightly older, and there have been a few design changes. There is some debate on the GTX460M not being as good as the ATI offering, but I have only seen benchmarks, and not real life FPS comparisons.
The trackpad now has two buttons instead of a one button...
I thought about business class, but opted to get a little more computer for a little less money. the Elitebooks are nice, I use one for work. Unfortunately to configure it to the spec I'm looking for it comes in over $3500. I can go with a "gaming notebook" for about half that.
You're forgiven. :) I know that 5 years in laptop time is like a century to the rest of the world, but I also can't replace a laptop that often. So since I figured the last one put up a good 4 years, and has survived its 5th year with a lot of coaxing and bit of extra work, I think 5 years...
I decided to look at gaming laptops because they seem to have the best specs as far as hardware goes. I'd like it to be able to play games, but that's not my focus. The main heavy hitter that I'll be doing is Photoshop, and some other editing/pano stitching/HDR rendering software.
I'm...
Hi all,
I've been shopping out a new laptop to replace a nearly dead Compaq V2000 (yes it's old and way underpowered by current standards).
I've narrowed it down to a Sager 8690 and an Asus G53 over at Xoticpc.com
With similar specs they are coming out close enough in price that I can go...
My current computer was an AthlonXP 2500, and it's well past time for an upgrade.
I've been reading through the forums, and I'm not sure which direction to go with a solid budget build. I don't know much about the current crop of AMD procs, and only a bit about the Intels.
I'd like to stay as...
Here is my latest workaround, and boy is it ugly...
Since there was another post to help resurect the thread, I'll add any info
that I have, and see if there are any more suggestions.
My current boot process, is to disconnect the SATA cable from the controller card.
Boot the machine
Plug in...
I don't believe that the bios for the SATA controller is conigurable. The one on the MB, would just hang and not allow me to hit F4 to go into the raid configuration, and that was the only config available. The addin-pci card controller doesn't even have that option.
My 5v rail usually runs...
Drivers are installed, and it works fine in windows. I just can't seem to get it to work will attached during boot.
I've searched the nforce fourms, asus forums, and everywhere else I can think of.
Is there some kinds of bios on the disk itself that could be causing a conflict with the...
I also picked up a compusa brand "cheapo" sata controller, when I thought something might be wrong on the MB. That is the one that's using a sil3512 chip.
The SATA drive is connected to channel 1 on the pci SATA card.
(aka the cheapo controller)
I've had the same result with both the cheap...
Ok, as the subject said, I'm in major need of some help on this one....
Here's the situation and the details.
MB: Asus A7N8X Deluxe (rev 2.0)
Proc: Athlon XP 2500
Mem: 1 gig
Vid: 9500
I had a raid set previously made up of 2 Maxtor 250 gig drives, that were
actually IDE, but had adapters to...
Hi all,
My mom just got a new laptop (should arrive in a week), and she wants to get a new printer. She looked at a couple of all-in-one models, but wasn't sure what to pick. I'd like to help her find something nice, and easy to work with.
Ideally here are some of the features I'm hoping...
Insurance!!!!
That's why you have it.
Best case, you get the check, build a new rig, and your old HDs will still fire up long enough to copy any important data over to the new machine.
Extreme heat and smoke damage will kill your computer. It might not be immediate, but the death will be...
Possibly a dumb question, but did you turn the printer off and unplug it for a while? If not yank the cord for a bit, maybe 15 minutes....
I vaugely recall there being a reset function on most printers. I think I read it on a site talking about how to use refill kits for cartridges. All the...
I'm a bit of an audio nut, and I can tell you I'm not familiar with anything like that yet...
I would suspect that the lack of such a product is that the is a demand for bluetooth headphones. Phones that have a bluetooth receiver built into them. With what you're looking for you'd still have...
On the corporate side I've used a number of Exabyte systems, and they've been great performers. Once set up properly, with good backup procedures, I've rarely had problems.
My only complaint is price. I'd love to get even a single drive setup for home use, but just can't justify the cost...
Actually, I've even seen nibblers at RadioShack. $10 or $15 if I remember correctly.
To follow up to the previously dead thread, I have to throw in another vote for files. I good set of files can turn out to be absolutely indespensible (sp?). Dremel will be easier and faster, but you can't...
That actually is where I was planning on buying. Unfortunately, afte finding it there, a day or two later it was out of stock. I haven't checked in a few days though. I also saw it at NewEgg for a similar price.
Might go with the egg because I need to get a new psu as well. With or...
Yup it's out there... I bought a couple years ago to take advantage of the SATA ports on my box when I had a great deal on cheap ATA drives. I couldn't find the same model I'm using over at newegg, but this is similar:
http://www.newegg.com/Product/Product.asp?Item=N82E16812203016
good luck...
GonzoP, Thanks for the link.
I'm figuring I'll do better with an x8xx card than with a X1600. I really just want to get a good upgrade moving from my 9500 without breaking the bank.
Now I have to ask the dumb question....
which is better?
the AIW, GTO, or 850Pro?
all are within my...
I'm looking to upgrade my 9500 and I'm wondering if this will be a good card.
I don't really care about the all in wonder part, but it's the only x800 card I can find thats not
over $200.
I've got an A7N8X deluxe and a 2500+
I'd like to get better gaming performance, and from what I've read...
I'm not familiar with JBOD through windows disk manager, but it MIGHT keep the contents in tact. My experience with JBOD on normal hardware controllers however, is that this will not be the case. JBOD does have the advantage over raid0 in that if you lose 1 disk you won't necessarily lose...
The scanners with the ability to do slides and film have a light in the lid that is on when used for film scanning. The film goes into the special holder, to keep it flat, and put it directly under the light source.
I've used my epson 3750 for a good amount of 35mm film scanning and I've been...
I'd go for the Epson R220 (or R200 old stock, same printer)
It's about 90-100 depending where you shop. Not sure about rebates
since I usually try to avoid them.
Also, does CD printing which is a nice bonus.
Photos turn out GREAT.
Bought this to replace my outdated, though still...
Very cool case.
And the reason I'm posting vs. just admiring from a distance, is that I like the technique you
used to photograph it. I hadn't thought about doing a double exposure (in effect) to show the case, and get the ligthing effects. Very nicely done!
-Jeff
technically if you're using a mono plug (two wires) then the tip would be positive and ring would be negative.
On a stereo plug, tip would be left, ring would be right, and sleeve would be negative.
technically negative in the above instances is ground.
-Jeff
Rebates are a major PITA!
<mini-rant>
I sent three in back in October, and just got the first check back from HP yesterday.
I'm still waiting on the others from Epson. I'd be willing to wager even money, that I'll never
get the check, or if it does come, it will be another 3 months...
Head on over to http://www.head-fi.org and check out the Do It Yourself forums. There are
a lot of posts covering this, as well as quite a few helpful people that can add useful input.
-Jeff
My next purchase will probably be a Hakko because it's in my price range.
If I had the money to spend, I'd get a very nice Metcal station, and a few irons.
Unfortunately for a hobby, it's too much to invest at this time. In the mean time I'll
be living with my cheapie ratshack special until...
probalby not an ESD problem, but your computer might be worse than before, depending.
I've got an Ionic Breeze, which I believe is similar to your device.
They work on the principle of charging the air with one polarization. Then the collection grid is charged with the oposite polarity, and...
Forgive me if this has been posted before, I only scanned the thread. The easiest way
is to get a Visa Gift Card. You can buy them from most banks. I give as gifts to my neices
who live on the otherside of the country. They only charge like a buck or two to get them.
They can be used like a...
Check out the ADS products. I've been using the InstantDVD for quite a while and
it's really good. It's a hardware encoder, and does a good job. Price is decen too, as long
as you don't buy it directly from the company :)
-Jeff
for temp stuff, I usually just write what something is, on a stickie note, and stick it
to the disc. I pull it off before inserting into the computer obviously. Goes right back on
after I eject.
Very NOT permanent.
-Jeff
In short, no, they are not worth $300.
Head over to www.head-fi.org and go through the Headphones forum. You'll find much
better sound, at a much better price. There are a lot of very helpful people on there and
some really good information.
I will warn you however, that just like here...
If you don't want to change your existing media keep up with the marker....
Otherwise go with a printable media, and get a printer that can print on cd/dvd. The
Epson R200 can do it, and is fairly cheap these days.
Don't try to print on media not made for inkjet printing though. It will...
Just being a smoker isn't bad (for your computer) as long as you don't do it near the computer. There are two smokers in my house, and a long hair dog. I had my case running open for almost a year with no problems. I used canned air every month or so to keep it
clean, but there was no "nasty...