Search results

  1. sblantipodi

    Show Your LCD(s) setups!!!

    My PG32UCDMR running Luciferin DIY ambilight https://youtu.be/Ih9KorYRSpk?si=6OK5WC09qv0FtBj9
  2. sblantipodi

    Best fan position for top mount AIO radiator?

    a spider likes your computer.
  3. sblantipodi

    Cyberpower UPS shutoff during battery calibration

    Ok, I figured out why I had that issue. A few years ago, I set this option on the UPS: That’s why the battery calibration stopped exactly after 30 minutes. I disabled the "Uptime on Battery" feature and re-ran the battery calibration and now it worked perfectly. The calibration test fully...
  4. sblantipodi

    Cyberpower UPS shutoff during battery calibration

    Hi there, I replaced the batteries in my PR1500ELCD with two genuine new YUASA NP18-12B 12V 17.2Ah batteries. The UPS seems to be working well, so I decided to run the battery calibration test. However, after 30 minutes of calibration with a 350W load, the UPS shut down abruptly, even though...
  5. sblantipodi

    New and Improved Watercooling Sticky - Post Your Systems Here

    Corsair products are top notch, loving them.
  6. sblantipodi

    Corsair HydroX products are damn good.

    As title. I just want to share my experience with Corsair's HydroX products. They are damn good. Radiators are made by HardwareLabs and fittings by BitsPower so two of the best in class in their segment. Pumps uses the well known D5. Fans are better than what most people say. This are the...
  7. sblantipodi

    Windows 11 24H2, MSI Afterburner and GSOD

    using the latest ones...
  8. sblantipodi

    Windows 11 24H2, MSI Afterburner and GSOD

    I think that the problems depends on a faulty usb device... if I disconnect it, it doesn't happen... damn
  9. sblantipodi

    Windows 11 24H2, MSI Afterburner and GSOD

    Is there someone that is experiencing green screen of death after upgrading to Windows 11 24H2 while using MSI afterburner? This happens even when the card is not overclocked. The error is: System thread exception not handled Removing overclock does not help.
  10. sblantipodi

    Will my GPU degrade over time? RTX4090 @520W 1.1V

    are you serious? do you even know what you are telling about?
  11. sblantipodi

    Will my GPU degrade over time? RTX4090 @520W 1.1V

    All that cards are simply not stable. No need to explore this. Very very few cards are able to do 3GHz with under volt. Probably they can do it with light loads, but certainly not with the cards at full blast
  12. sblantipodi

    Will my GPU degrade over time? RTX4090 @520W 1.1V

    no, I mean +20% of performance in most titles. the point is that with demanding games there is no way to run the card at 3GHz core and 12GHz VRAM without feeding it with 520W. I'm using a custom waterloop
  13. sblantipodi

    Will my GPU degrade over time? RTX4090 @520W 1.1V

    what do you mean? at 520W my cards performs 20% more than at stock.
  14. sblantipodi

    What is your DeltaT (coolant temp)?

    what CPU and GPU are you using? signature seems disabled. AIDA is not really a good test for the GPU heat test...
  15. sblantipodi

    Will my GPU degrade over time? RTX4090 @520W 1.1V

    My SuprimX does not go higher than 520W at 1.1V because it's power limited at 520W. What's your power limit? and what card are you using?
  16. sblantipodi

    Will my GPU degrade over time? RTX4090 @520W 1.1V

    Are you sure that the new one comes with 1.06V? Newer MSI SuprimX is 1.06V?
  17. sblantipodi

    Will my GPU degrade over time? RTX4090 @520W 1.1V

    I know that no one is interested in answering this question but is 520W at 1.1V considered safe for an RTX4090 that doesn't go over 65°C in temp? should I see degradation over time with this settings?
  18. sblantipodi

    The 32 inch 4k IPS 144hz's...(Update - this party is started) (wait for it...)

    Acer X32FP is even better than the Asus in some areas but it's difficult to find now.
  19. sblantipodi

    The 32 inch 4k IPS 144hz's...(Update - this party is started) (wait for it...)

    https://youtu.be/wp87F6gczGw?si=8E-fBG38rofWbi6K I really hope to see more MiniLED than OLEDs in the future... gaming monitors, what a stupid tech.
  20. sblantipodi

    What is your DeltaT (coolant temp)?

    a 3D Mark, steel nomad or port royal in stress test mode for 15 minutes should be enough even if CPU is not really maxed out in that test.
  21. sblantipodi

    What is your DeltaT (coolant temp)?

    As title. What is your DeltaT? Please tell us your DeltaT under max load for at least ten minutes and post your: - max watt - number of rads and fans, fan speer - pump speed details - ambient temp - case in use - CPU and GPU My setup achieve this: With 29°C ambient temp, using 2x Corsair XR5...
  22. sblantipodi

    Is there an internal hub that transforms USB 3.0 to USB 2.0 headers?

    thank you all for the answers... Is there some adapters from reputable brands? I generally don't put "low quality parts" in my PC :D
  23. sblantipodi

    Is there an internal hub that transforms USB 3.0 to USB 2.0 headers?

    No no, I have a lot of internal usb 2 devices and I want to connect that devices to the internal usb 3 connector.
  24. sblantipodi

    Corsair HX1200i vs HX1200i 2024

    Is It true that the old HX1200i was an analog PSU with digital monitoring funxtion while the new 2024 version is a complete digital PSU? If yes what's the difference between the HX1200i and the AX1600i apart the obvious max wattage? Are they both fully digital PSU with digital voltage...
  25. sblantipodi

    Is there an internal hub that transforms USB 3.0 to USB 2.0 headers?

    As title. Is there an internal hub that transform a USB 3 internal header to multiple USB 2 internal headers? basically I would like to connect USB 2 internal devices to USB 3 internal headers.
  26. sblantipodi

    Is there a transparent soft tube that lasts a year?

    At the end I updated my build from transparent tubes to black EPDM ones, I really don't want to see discoloration or plasticisers leaking into my loop. I preferred the transparent heastetic but black tubes aren't that bad Before: After:
  27. sblantipodi

    Is there a transparent soft tube that lasts a year?

    two years without discolouring? it's allllot.
  28. sblantipodi

    Is there a transparent soft tube that lasts a year?

    as title. is it possible to have a transparent soft tube that doesn't discolour or loose plasticizers in one year? What's your experience with soft tubing?
  29. sblantipodi

    9950X and 9950X3D is going to be terrific.

    I sincerely have no problems running 6000/C30 with tight secondaries and tertiaries on 4x16GB sticks that is much more difficult than using 2 sticks. Never had problems with the game bar non recognizing the 3D chip if you do the automatic updates. the cool things is that it automatically uses...
  30. sblantipodi

    New and Improved Watercooling Sticky - Post Your Systems Here

    here my buld... 7950X3D+RTX4090 with Corsair Hydro X components and soft tube.
  31. sblantipodi

    9950X and 9950X3D is going to be terrific.

    very very very disappointed, at stock voltages this CPU performs very similar to 14900K.
  32. sblantipodi

    9950X and 9950X3D is going to be terrific.

    from what we have seen from 9950X multicore is the weak part of Zen5 IMHO. they shown us a 9950X scoring 44K in CB23 with PBO enabled, I would not call this a good improvement considering that a 7950X is able to score 38.5K no problem.
  33. sblantipodi

    9950X and 9950X3D is going to be terrific.

    Latest AMD presentation showed this. A 12 core CPU that is faster than a 8+16 from intel 9900X is 16% faster then 14900K in blender, this is absolutely insane If this is true, why the 9950X that we all seen running a CB23 scores only 44K when PBO is active and 43K when at stock? This...
  34. sblantipodi

    How to fit three 360mm rads a reservoir and an air cooled 4090 on a Lian Li O11 RGB?

    I think that three rads is overkill even for both the cpu and GPU but there is room in the case so why not xD
  35. sblantipodi

    How to fit three 360mm rads a reservoir and an air cooled 4090 on a Lian Li O11 RGB?

    The idea is to use all the rads for the CPU and GPU. But there are some moments when I swap the GPU for a new one, when the GPU is on air and without a wb. This is why my question. :)
  36. sblantipodi

    How to fit three 360mm rads a reservoir and an air cooled 4090 on a Lian Li O11 RGB?

    I would like to put the pump in that position, doing that will let me put a GPU as long as I want. Do you think that it could fit ?
  37. sblantipodi

    How to fit three 360mm rads a reservoir and an air cooled 4090 on a Lian Li O11 RGB?

    I can't find the size of that pump reservoir :( It could be cool to mount it over the GPU with the GPU going down...
  38. sblantipodi

    How to fit three 360mm rads a reservoir and an air cooled 4090 on a Lian Li O11 RGB?

    Ok but will that pump/reservoir fit with three rads and an air cooled GPU?
  39. sblantipodi

    How to fit three 360mm rads a reservoir and an air cooled 4090 on a Lian Li O11 RGB?

    Hi there. I would like to put three 360mm rads in a Lian Li O11 Dynamic Evo RGB. Those rads will need a pump and a reservoir. I like the Corsair XD5 elite LCD How can I fit all those things in a 011 RGB case with a rtx4090 air cooled card like the suprim X? I obviously want to put a...
Back
Top