Search results

What did you end up doing?

That's something that I thought too, but I'm positive the sound is coming from the psu as I have assembled the computer outside of the case and it was clear where the sound was coming from. I've read that some combinations of psu 's and motherboards can cause this. I just don't think RMA'ing...

I will say that the noise happened before I got my new video card and psu when I was using my old geforce 9800gtx and TX650 in combination with my new cpu and motherboard. I got approved for an RMA but I'm reluctant to follow through with it as I think the problem will be there when they replace...

Just thought I would give an update. The sound has come back like before and not only does it when I move the mouse, but when loading certain things like webpages or when firing up a game, it makes the buzzing noise. I contacted Corsair explaining the issue and they said that is not normal and...

I noticed that when I plugged in my older Corsair TX650 that it did the same thing, but I don't recall this occurring on my older motherboard. I have read that some Corsair power supplies will do that on some motherboards that have power saving features like epu engine and what not. The sound...

I recently made a big hardware upgrade to my computer and I have noticed that whenever I move my mouse while in windows (Logitech G9x), I can hear a faint "frequency" sound coming from inside the case.Putting my ear inside the case, this sound seems to be coming from the PSU. I have done some...

Thanks for the responses. I tried those hotfixes xpavement and there wasn't really any noticeable difference, but I will just give Windows some time to cache the the boot files and see if that makes any difference. This isn't really that huge of a deal, but I thought I would mention it as I tend...

http://imgur.com/JDyTsBv Ran AS SSD if anyone was interested in seeing it. Also I did notice I don't have the newest firmware but that's because it won't update it because of UEFI.

Yes, same SSD that I used in my last build. Also, I generally don't run any benchmarks as I don't really know what I am looking at, although I do still have AS SSD Benchmark on my computer. I can run it and post results if that would help any.

I plugged in one of the new sata cables and the results were the same. I would like to point out that the load time isn't slow by any means, it just happens to be a little bit slower than it was before which surprised me considering this motherboard has 6 gb/s ports instead of 3 gb/s ports on my...

Yes, I also checked for the latest firmware for the SSD and it is up to date. I will try using one of the new sata cables that came with the motherboard here soon once windows update finishes. I will post back.

Yes, I made to sure to enable AHCI in the bios before I installed Windows.

I wasn't entirely sure where this should go, so I figured this would be the safest spot for it. I am having just a minor problem after upgrading my system from an Asus P5Q Pro and E8400 to an Asus Sabertooth 990fx rev 2 and FX-8350. The problem is that before on my older Intel setup, windows...

Sorry rockettech, I guess I was getting some of my terminology mixed up along with getting confused by your previous response. I have followed your all's steps (set modem to bridge mode, rebooted router, router assigns new ip address) yet I still don't have internet access. And to answer your...

The Linksys is my router, and under advanced settings, it is set to "gateway". My Arris modem is what I am trying to set to bridge mode, but when I do, I lose internet connection. I don't know if there is any other settings on my modem that I need to change to get this to work, but thus far, I...

I noticed a setting in the linksys router to switch it between gateway and router, and its set to gateway. Unless I overlooked it, would my arris gateway have this setting too? As for dhcp, does that need to be disabled on the arris gateway? And when you say wrt, are you referring to my linksys...

I tried what you suggested, and it still didn't work. Error comes back as a DNS issue. One thing I've noticed is after setting the gateway to bridge mode, when I type the ip address of the gateway in my browser, it takes me to the sign in page but tells me my password is wrong when I type it in...

I checked and it is plugged into the #1 slot. I have to go to work now, but I will try your suggestions when I get home later. Thanks for your help.

So my ISP recently replaced my modem with an Arris TG852 residential gateway. I believe this new hardware device is causing me some problems regarding some ports that I have forwarded in my Linksys WRT54GL router. After numerous research and tinkering around with these devices, I've come to the...

The drive is reporting as BAD under HD Tune. When I try and do a chkdsk /r it gets stuck on stage 4 of 5. When I do a chkdsk in properties and choose "scan for and attempt recovery of bad sectors", it finishes and reports no problems. I can access the data on the drive but it won't always let...

Well after booting into my old installation of Windows, I ran a check on the slave drive for any errors and it said it found some. I plugged my new SSD in and booted into that and the problem seems to have gone away. No idea how the slave drive could have gotten bad sectors when it was...

I am in my old installation of Windows now that's on my mechanical drive. I plugged in my slave drive into another computer upstairs and so far it is working and copying over all my music. I will try it on this computer as well. Would this drive being configured as IDE in the bios and my new...

So I just got my new SSD in today, and have installed Windows 7 Pro x64 on it. Whenever I try and boot into windows with my slave drive that just has a bunch of media on it, i get presented with a The Recycle Bin on E:\ is Corrupted error message. Whenever I try to access the slave drive, it...

I have rolled back all the way down to 275.xx drivers and I have installed the monitors driver, neither correct the issue. Also, don't know if its related, but a while back I took my computer to a friends and used his monitor which has a 1440x900 native resolution. Don't know if my card is...

That's what I was thinking, just can't seem to find out how to fix it.

So for the longest time, the resolution 1440x900 has always appeared after my native resolution of 1920x1080 in games when I go to pick my resolution. Even after a reformat, it still did the same thing. Well I just happened to notice what is causing it to do this. The 3 different modes for...

I have Hamachi version 1.0.1.5 installed on my Vista 32bit machine. Whenever I run the program, it will freeze after it logs me in, and the only way to unfreeze it is by right-clicking the Hamachi icon in the system tray. Also whenever I try and view any messages by right-clicking the Hamachi...

I think you did. If only my board supported DDR3 =/ I've been looking into upgrading, just have to find out where all that money is going to come from.

Nice. That G Skill you linked is the same stuff I got, 'cept mine is 800mhz stock. Didn't find spending the extra for 1066 justifiable in my case considering I'm strapped on cash and was lucky to get the set I did.

Wow, that must of been nice. Wondering how you were able to sell them for what you paid. Anyways, nice to hear you had no problems with your motherboard/ram combo, hopefully the same applies to me. If all goes well, I will be so relieved that these problems have come to a stop.

For an update on this grueling process i've been having with memory errors for over 6 months now, i decided to go ahead and purchase a dual channel kit. I got G Skill F2-6400CL5D for 65 dollars. Wish i didn't have to get new ram, but it appears that was my only option. Not much you can do with...

It has been tested all the way down to 667mhz along with using the recommended timing and voltage. As of now, I have the system running with the 1 gb stick and 2 gb stick in the yellow primary slots, and the other 1 gb stick in the black secondary slot, but as in the past, i should be expecting...

Yea I did have a matched 4gb set but one of the 2gb sticks has gone bad and I'm reluctant to RMA it cause its my third replacement set. I've heard there has been compatibility issues between the p5q pro anda corsair ram, so I'm sure I'm experiencing some of that. Ill probably end up just buying...

So I have had an ongoing memory problem with my system for months now. At the current moment I have two 1 gig sticks and one 2 gig stick. My other 2 gig stick is bad. I am trying to run 4 gigs by putting the 1 gig sticks in dual channel mode in the primary slots then tack on the 2 gig stick in...

Problem still persists even with memory remapping disabled. System runs solid for a day or so, then the problems arise once again. Any more input? Edit: So i decided to put the two sticks in the B ram slots rather than the A slots and so far its running strong. Could the ram slots be bad even...

So after doing some more thorough research, I have found that I need to have "memory remapping" disabled considering I'm using a 32 bit operating system. We'll see if this fixes the problem.

Hmm i always figured to raise the voltage. I have increased the NB voltage a little bit which doesnt help and i have also decresed the ram voltage which doesnt help either. Im at a loss =/

Turns out that just turning off the computer and unplugging it fixes the problem temporarily... Does that mean something specific? And if i can just note, this only happens when i have 4 gigs of ram in, it never does it with my two 1 gig modules in.

To Soban: yes the computer is on the whole time and i manually set those settings. To Stone Cold: I have not tried that, I will try it next time the problem arises.

So i have two sticks of 2gb corsair dominator RAM. I have both sticks in, equaling 4 gigs total on a 32 bit vista system. The sticks run fine for a couple days, then they start acting up, so I run memtest and immediately get errors. I can fix this issue by removing the sticks and reinserting...