Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
Let me first say, 4k is awesome. I love it. However, one 980ti leaves me right on the short side of what I consider acceptable frame rates. In most games I can set them to ultra, and then bump a few of the big performance hitting settings down, and I'm around 40-50fps, which I can live with...
I've recorded and played back several 4k videos without any issues. However, for some reason, I cant play x265 videos in WMP, VLC, or 5K video player. It almost seems like some sort of driver or hardware issue. Has anyone had any similar experiences or ideas?
Fixed it, bad codec installation...
I'm sure this is probably a commonly discussed thing, but I'm curious how exactly this is going to work. I have an evga 980ti classified (the biggest video card ever). I'm looking to add a second in SLI, however I'm staring at the PCI-E slots on my Maximus VIII Gene, and the top cooler's fans...
Apparently a 980ti classified doesn't fit in a corsair Air 240. Not even close. What mATX cases can fit an evga 980ti classified in them? Anyone care to chime in?
So, been rocking the 980ti for a couple months. Honestly, it works pretty decently for most games, but it's right at the edge of acceptable. It's a little frustrating to spend a large chunk of money and not get a solid 60fps. So, I think I'm going to buy another 980ti. Guys who are using...
My ratpadz is out again, I went to reorder and their website appears to be broken. So, what's changed in the last several years? any new pads worth the money? I was looking at the steel series qck pad, seems nice as you can roll it up and it isn't rigid like the ratpadz.
Interesting article I ran across searching for something unrelated, it seemed nostalgic and timely.
https://books.google.com/books?id=FTbctntiaHgC&lpg=RA1-PA258&ots=4VlrT5zMW-&dq=MICRON%20PENTIUM%20100&pg=RA1-PA318#v=onepage&q=MICRON%20PENTIUM%20100&f=false
Upgrading, and parting with my old cpu/mobo.
The processor and motherboard are roughly 8 months old, neither have been overclocked or messed with, just installed and ran.
Processor: AMD FX-8350
Cooling: Cooler Master Hyper TX3 (I think that's the cooler on it)
Motherboard: ASUS M5A97 R2.0...
And now everyone and their mother is halfway through a post telling me to do two 970's or 980's in SLI. I did my homework for quite some time, and it seems to me since I'm planning on doing 4k gaming, that is the best option. I've had SLI setups in the past, and they proved to be quite...
I have an older Phenom X4 965 BE processor which I've had for 7 years now, and it's been good to me. I recently upgraded to a GTX 970 so I could get 70fps average on ultra in BF4 @ 1080p, unfortunately I'm barely at half that in multiplayer... that's just not acceptable, I had to switch back to...
**NOTICE** I want everyone to know up front that I do not use paypal - had some bad experiences with them in the past and I no longer use them. I prefer money order, or in person cash is fine as well. If you have another preferred online option I'm certainly open to using it.
I have several...
I upgraded my board to an AM3+ board in anticipation of the BD....which really let me down. Should I consider an upgrade? Will it give me any fps benefits in bf3 for instance? I have a GTX 650Ti. It would seem the bottleneck is neither my processor or video, but would I stand to gain...
Wanting to get rid of it quickly, from what I can tell I'm about $40-50 cheaper than most places used.
This board is NIB - I received it back from MSI on an RMA and never installed the board. Came back in new box, all discs/manuals/hardware/peripherals are enclosed unopened. This is a high...
I've been trying to get my debugger to work for quite some time but I've never been able to get it to work right since I went to a 64 bit platform in vista. Anyways, here are my two dump files.
MSI 790FX-GD70 Motherboard
AMD Phenom II 965BE
Geforce 8800GTX
4x1024 Crucial Ballistic DDR3
My...
My entire system is on a single 1/2" loop through a 77 bonn heatercore rad w/ 2 s-flex scythe 120mm's. I recently built my new system with a 965 and I started to run into some odd bluescreens which I presume were heat related. So much for passive cooling on my voltage regulators... I placed my...
Building a computer for my brother out of my old system. I need a decent video card for around $100 bucks, hoping to get an 8 series or 9 series nvidia or something equivalent.
Well, I'm finally going to do it... I've been putting off consoles for years, but primarily I want it because it gives me a single easy HTPC I can stream video to via media center. The lady wants it for netflix, and a few games are not going to hurt either. But, I know there are 3 different...
I'm quite interested in the latest DX11 5 series ATi cards, however I'm a little bit concerned about the differences in HDMI audio. How do they compare? Do they have audio throughput like the nvidia series has? How do their onboard decoders compare to nvidia's throughput? I have been unable...
Lately I've been having bluescreens in w7, I determined them to possibly by NIC driver related. However, my system is still locking in the middle of the night while running torrents. Lately, I've had my system boot with "lower power warning" from my 8800GTX. I'm running a 850watt antec true...
Well, up until very recently my windows7 experience had been perfectly fine. However, I've started to get blue screens, two of them occured when I was away from the system during the day, and tonight I had one happen when I was using the computer. I didn't see any specific driver or component...
So, I decided to finally purchase a reservoir, and retire my old one I had built 3 years ago from a container store q-tip holder.
A week after I installed the new res I noticed my water level was rather low - about halfway empty - however I figured since I had replaced all the lines it was just...
Well, I decided to upgrade my old quad core system with a new processor/mobo I won at quakecon - a 965BE. Everything came in, built the new system using all my old blocks, everything was up and running, and I noticed my Eheim 1260 decided to shit the bed, and was leaking water on the bottom of...
Was building a cheap system for my girlfriend and the damn waterblock is cracked... I need a new block for the cpu, not looking to spend a whole lot, just need something to toss in there with 3/8" barbs.
FrozenCPU's prices are just ridiculous, I've bought from them several times, but I just am not going to pay 8 dollar shipping on the cheapest stuff. Where does everyone buy their tubing?
I recently ghosted my old harddrive and copied the image over to my new drive, however despite me being in vista right now, it isn't loading any user profiles, and keeping me out of administrative accounts because it can't access them using the default C:\ root.
So, how the hell do I switch...
Quick question that's going to need the knowledge [H] has. If I copy the MBR from a 500GB drive over to a 750GB drive will the partition remain 500GB, or will I have 250GB free?
I used Ghost to copy over and set active form my 500, and that worked, but the drive continually defaults to E...
Should I use Norton Ghost to copy over all my data from my old 500GB over to my 750GB? I did some drive tests and it's literally twice as fast as my old drive, I'd like to copy over all my data to the 750 to speed my system up, and use the 500 as my secondary. What's the best approach to doing...
I have a core waterblock, and I need the cooler that takes care off the voltage regulators/memory. One from Dtek would be fine or any other manufacturer, as long as the core is open to receive my dtek fuzion block.
I recently picked up a GTX and I was wanting to mount my dtek block on it, I wanted to know if they have the same pattern for the core heat sink, the 4 bolts that surround the core as the GTS does. I know overall the heatsinks differ, but for the core only are they the same?
Seriously, I've never seen anything so ridiculous, there are no speaker settings in the menus, and regardless of what windows is set to, I get 2 channel audio. Googled for about 10 minutes couldn't find shit.
I have the big boy pump in my loop, and it is just one loud, vibrating demon. What would you guys recommend I could do to quiet this thing? It vibrates my whole case. I have the pump fitted with 1/2" thick foam feet and it sitting on 1/4" thick piece of neoprene, I've tried just about...