Recent content by zalazin

  1. Z

    Black cloth tape inside laptop

  2. Z

    Black cloth tape inside laptop

    just for snickers I did the hole enlargement took me three hours to drill out all the holes. if you look closely you can see the copper under the vent hole on left side. Don't believe a heat sink will fit not even a 16th of an inch space.....temp drop of about two degrees.......
  3. Z

    Black cloth tape inside laptop

    Yep those are my options. Think I will drill out the holes and add a heat sink with adhesive pad, if the pad shows gain then I'll thermal epoxy the heat sink.... Don't think I can do much more with this machine..... Hey thanks for your input ....
  4. Z

    Black cloth tape inside laptop

    here is what copper looks like under black tape its solid all the way through the heat sink....
  5. Z

    Black cloth tape inside laptop

    the whole heat piet sits right over the vent holes, any heatsink fins would point directly at them, they are really tiny though. It looks as if the only real air is pulled through the tiny holes by the single fan on the far left. the Cpu is the farthest thing and only thing that the heatsink...
  6. Z

    Black cloth tape inside laptop

    You have always been a pretty smart guy. Im sending a pic This is sort of what the I5 heat pipe look like except the fan is actually separate. Anyhoo you see the number 3 with the four screws over the cpu? well that a has a copper piece there. I'm just thinking of putting another copper...
  7. Z

    Black cloth tape inside laptop

    come to think of it, it is over the intake holes for air intake although they are too small for anyone to see through, I did remove it though and fan did get louder....
  8. Z

    Black cloth tape inside laptop

    My little I5 laptop has a 1.5 strip of black cloth like material minimally attached to the heatpipe. It goes the length of the pipe up to the exhaust fan. Partially adhesive on the sides also partially covers the metal memory shield. Is this supposed to trap heat in the heatpipe or insulate the...
  9. Z

    single and dual bank in laptops

    I did all that if you check my posts... Its got to be something related to the rank thing. I originally bought the 3200 16 gb for my Zephrus G14 which has one single rank 8GB soldered on board with another single rank on a upgradable second slot. I knew installing the 3200 16gb would create a...
  10. Z

    single and dual bank in laptops

    Now I do have two 8GB samsung modules with a 1RX8 on the label, which according to google articles means it is single rank, Now will these two in dual channel give me full speed or will the single rank of both slow the perfomance down?
  11. Z

    single and dual bank in laptops

    heres a flex memory link https://serverfault.com/questions/912283/can-mixing-ram-memory-size-on-its-own-reduce-dual-channel-performance/912298?fbclid=IwAR15cKYw5ifhGbVa9GxywBEdw-AKX7MnehYgZsvZq_ZDhAChxD_k6RwtXeE
  12. Z

    single and dual bank in laptops

    This whole thing sort of sounds like if you mix single and dual rank with the two sodimm sockets you sort of create a flex memory situation though not quite as bad......
  13. Z

    single and dual bank in laptops

    the crucial was 3200 CL 17, dual bank, pny was 2666 CL19 single bank
  14. Z

    single and dual bank in laptops

    I have an HP i5 10210u with 32 GB of ddr 4 both dual bank crucial sodimms one a 2400 the other 3200. Machine runs perfectly fine but at 2400 the slowest memory rule. The mobo on this laptop is rated for 2666 mem. Well I picked up a PNY 16GB 2666 single bank sodimm and removed the 2400 one. The...
  15. Z

    cheap oem power brick not enough?

    well maybe. It never crashes only on an undervolt. Maybe This I5 10210u cannot be undervolted at all ....I have not had much luck with XTU or throttlestop seems stable but then out of the blue crashes same with my surface go the 4415y does not undervolt well either..... Could it be that what I...
Top