Recent content by bardos

you are a god, thx

You, my friend, are a god. many thanks

I did a deep dive on Xigmatek, but nothing. there is one case that has a similar design, but isn't. thx

The tower has no identifying labels except for a Part# 11147183111600068, googling this P/N gives me nothing. I even looked at google images of full towers, didn't see anything similar. I would like to know the manufacturer and model number, but alas, stymied. Thus this post. Perhaps someone can...

Ok , here is a better pic. I think it may be the inverter. Anyone know? It's a shadow which moves from top to bottom continuously. The photo captures one moment as it vertically crosses the screen.

Getting these black lines across the screen. Wondering what to replace inside. The power board? Any advice welcome. Thx

But my gigabyte.ga-z87x-ud3h mobo has one embedded, so post codes must still be a thing, no?

I'm looking for a POST diagnostic card that will work with PCI-E... I have an older one for PCI alone and of course it does not work with the new slots. I have been looking around (principally on ebay and amazon) and I can't really understand what's what with the new diagnostic cards. Can anyone...

It's the HM55 chipset Acer aspire 5742-374g32mnkk

I am using an Aspire 5742 laptop which is "standarized" for ddr3 1066Mhz memory, (204 pin) however my laptop is running fine with ddr3 2x2gb of 1333Mhz memory. It runs at 1066Mhz, but with lower CAS latencies, which is nice. I am thinking of upgrading to ddr3 2x4gb 1600Mhz memory, but not sure...

I bought a second hand UPS on ebay a while back, the seller saying there was a new battery installed... I've been noticing through testing (and blackouts) that it will last me only about one minute before shutting down. It's an Eaton Ellipse eco 800 which uses by default one 12v 9AH...

I am using BIOS F9. The latest is a beta F10b. I am not (or was not) too sure about using a beta bios edit: upgraded to F10b and yes it holds. Thanks so much

I'm running the g3258 cpu with a ga-z87-ud3h board. In the bios the CPU vcore is set at 1,27v and the multiplier to 44. Readout in the bios says this is 4,4Ghz. The RAM is set at profile1: 1600Mhz at 1,65v. When I boot into windows (win7 ultimate sp1 32 bit) and open AIDA64 or CPU-Z, these...

i don't think there is that... it did recognise my floppy usb perfectly. i don't have the laptop here. i gave it back to my friend, told him to get a compatible dvd drive for the laptop itself.

ya could be the laptop itself. it did recognise the external floppy usb...